Milwaukee 5261-DE Handleiding

Milwaukee Niet gecategoriseerd 5261-DE

Lees hieronder de 📖 handleiding in het Nederlandse voor Milwaukee 5261-DE (16 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 143 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16

Cat. No. / No de cat.

5261-DE

OPERATOR'S MANUAL

MANUEL de L'UTILISATEUR

MANUAL del OPERADOR

WARNING To reduce the risk of injury, user must read and understand operator's manual.

AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien

comprendre le manuel.

ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

VACUUM ASSISTED HAMMERVAC™ DUST EXTRACTOR

DÉPOUSSIÉREUR ASSISTÉ PAR DÉPRESSION HAMMERVAC™

EXTRACTOR DE POLVO HAMMERVAC™ ASISTIDO POR VACÍO

IMPORTANT

SAFETY

INSTRUCTIONS

WARNING

WHEN USING A

DUST EXTRAC-

T O R , B A S I C

PRECAUTIONS SHOULD ALWAYS

BE FOLLOWED, INCLUDING THE

FOLLOWING: READ ALL INSTRUC-

TIONS BEFORE USING DUST EX-

TRACTOR. FOR HOUSEHOLD OR

COMMERCIAL USE. BEFORE USING

THE DUST EXTRACTOR, READ THIS

OPERATOR’S MANUAL, AS WELL AS

YOUR TOOL AND VACUUM OPERA-

TOR’S MANUALS, AND ALL LABELS

ON THE DUST EXTRACTOR, TOOL,

AND VACUUM.

WORK AREA SAFETY

• Keep work area clean and well lit. Cluttered or dark

areas invite accidents.

• Do not use in the presence of explosive dust,

liquids or vapors.

• Do not use where oxygen or anesthetics are used.

• Do not allow to be used as a toy. Close attention

is necessary when used by or near children.

• Use extra care when using on stairs

ELECTRICAL SAFETY

• Do not pick up wet material. Do not use water to

settle dust.

PERSONAL SAFETY

• STAY ALERT. Watch what you are doing and use

common sense. Do not use dust extractor when you

are tired, distracted or under the inuence of drugs,

alcohol or medication causing diminished control.

• The operation of a dust extractor can result in for-

eign objects being blown into eyes, which can result

in eye damage. Always wear safety goggles or glass-

es with side shields when operating dust extractor.

• Wear a dust mask or use an OSHA compliant

dust extraction solution when working in dusty

situations. Dust particles can harm your lungs.

• Do not overreach. Keep proper footing and bal-

ance at all times. This enables better control of the

dust extractor in unexpected situations.

• Keep hair, loose clothing, ngers, and all parts

of body away from openings and moving parts.

• Use only as described in this manual. Use only

manufacturer’s recommended attachments.

USE AND CARE

• Do not use to pick up ammable or combustible

liquids such as gasoline or use in areas where they

may be present.

• Do not pick up anything that is burning or smok-

ing such as cigarettes, matches, or hot ashes.

• Do not pick up soot, cement, plaster or drywall

dust without lter in place. These are very ne

particles that may aect the performance of the motor

or be exhausted back into the air.

•This product is suitable for collection of silica

dust when used in accordance with these in-

structions. To reduce the risk of health hazards

from other vapors or dust, do not vacuum car-

cinogenic, toxic or hazardous materials such as

asbestos, arsenic, barium, beryllium, lead, pesticides

or other health endangered materials.

• WARNING: Some dust created by power sanding,

sawing, grinding, drilling, and other construction

activities contains chemicals known to cause can-

cer, birth defects or other reproductive harm. Some

examples of these chemicals are:

• lead from lead-based paint

• crystalline silica from bricks and cement and other

masonry products, and

• arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on

how often you do this type of work. To reduce your

exposure to these chemicals: work in a well ventilated

area, and work with approved safety equipment, such

as those dust masks that are specially designed to

lter out microscopic particles.

• Do not put any object into openings. Do not use

with any opening blocked; keep free of dust, lint, hair,

and anything else that may reduce air ow.

• Maintain dust extractor. Check for misalignment

or binding of moving parts, breakage of parts

and any other condition that may aect the dust

extractor's operation. If damaged, have the dust

extractor repaired before use. Many accidents are

caused by poorly maintained tools.

• Maintain labels and nameplates. These carry im

portant information. If unreadable or missing, contact

a MILWAUKEE service facility for a free replacement.

BATTERY PACK USE AND CARE

• Use dust extractor only with specically desig-

nated battery packs. Use of any other battery packs

may create a risk of injury and re.

• Turn o all controls before removing battery pack.

• To reduce the risk of electric shock, do not use on

wet surfaces. Do not expose to rain. Store indoors.

• Before using the battery pack or charger read the

operator’s manuals, and any labels on the battery

pack, charger and dust extractor.

• Recharge only with the charger specied by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of re when used

with another battery pack.

• When battery pack is not in use, keep it away

from other metal objects like paper clips, coins,

keys, nails, screws, or other small metal objects

that can make a connection from one terminal to

another. Shorting the battery terminals together may

cause burns or a re.

• Do not use damaged battery pack or dust extractor.

If battery pack or dust extractor are not working as they

should, have been dropped, damaged, left outdoors,

or dropped into water, return them to a service center.

SERVICE

• Have your power tool serviced by a qualied

repair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

SPECIFIC SAFETY RULES FOR

DUST EXTRACTORS

•Before using the dust extractor, read this opera-

tor’s manual, your tool and vacuum manuals, and

all labels on the dust extractor, tool, and vacuum.

• Always use side handle assembly with the correct

neck diameter for the rotary hammer/hammer

drill. An ill-tting side handle will not tighten securely,

causing loss of control.

• Wear ear protectors. Exposure to noise can cause

hearing loss.

•

WARNING

To reduce the risk of injury, wear a

dust mask or use an OSHA compli-

ant dust extraction solution when working in

dusty situations. Dust particles can harm your

lungs.

• Always use side handle(s) supplied with the tool.

Loss of control can cause personal injury.

• Hold power tool by insulated gripping surfaces,

when performing an operation where the fastener

may contact hidden wiring. Fasteners contacting

a “live” wire may make exposed metal parts of the

power tool “live” and could give the operator an

electric shock.

READ AND SAVE ALL

INSTRUCTIONS FOR

FUTURE USE

SPECIFICATIONS

Cat. No. 5261-DE ....................................................

Vacuum Port Diameter 2-1/2", 1-7/8" .......................

1-1/2", 1-1/4"

Max Bit Diameter 5/8" ..............................................

Hammer Collar Sizes

Diameter Circumference

S = Ø 43-46 mm (1.7"-1.8") 135-144.5 mm (5.3"-5.7")

M = Ø 48-55 mm (1.9"-2.2") 151-173 mm (6"-6.9")

L = Ø 56-59 mm (2.2"-2.3") 76-185 mm (6.9"-7.2")

FUNCTIONAL DESCRIPTION

1. Vacuum Port

Side Handle Clamp

2. Attachment Point

3. Tool and Bit Adjustment

Button

4. Depth Gauge

5. Depth Gauge Button

6. Nozzle

7. Nozzle Assembly

8. Bit Brush

9. Side Handle Clamping Collar Assembly

10. Clamp Lever

11. Side Handle Grip

ASSEMBLY

Connecting the Vacuum Hose

Attach the vacuum hose to the port. Twist to form

a tight t.

Installing/Removing Nozzle Assembly

To install the nozzle assembly supplied with the tool,

or accessory nozzles:

1. With the nozzle assembly

pointing straight up, line up

the lugs of the nozzle as-

sembly with the lugs on the

front of the HAMMERVAC™.

The unlock symbol on the

nozzle assembly will line up

with the mark on the top of the

HAMMERVAC™.

2. Turn the nozzle assembly left

or right to lock into place. The

lock symbol on the nozzle

assembly will line up with the

mark on the top of the HAM-

MERVAC™.

3. To remove, reverse the proce-

dure.

Installing/Removing Nozzle

Replace the nozzle:

• After drilling about 1500 holes,

• When the bit brush shows signs

of wear,

• When suction is reduced,

• When dust escapes through the

bit brush during use

To replace the nozzle (Cat. No.

49-90-2301), press in the release

button and pull out from the lower

nozzle assembly. Slide the new

nozzle into the lower nozzle assem-

bly until it snaps into place.

WARNING

To reduce the risk of injury, always

use side handle provided with dust

extractor when using with a rotary hammer/ham-

mer drill. When dust extractor is removed from

the tool, always use side handle(s) supplied with

the tool. Loss of control can cause personal injury.

Attaching the HAMMERVAC™ to a

Rotary Hammer/Hammer Drill

The HAMMERVAC™ is provided with three clamping

collar assemblies and one side handle grip. Choose

the correct clamping collar assembly for the tool

being used (see ). The side handle grip Specications

should be unscrewed from one assembly to be used

on another.

1. Disconnect power from

the tool.

2. Remove the tool side

handle.

3. Partially screw side handle

grip onto clamping collar

assembly

4. Slide the HAMMERVAC™

side handle clamping col-

lar assembly over the

chuck and onto the neck

of the tool. The clamp lever

must be facing up (3).

Product specificaties

Merk:	Milwaukee
Categorie:	Niet gecategoriseerd
Model:	5261-DE

Heb je hulp nodig?

Als je hulp nodig hebt met Milwaukee 5261-DE stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Milwaukee

Milwaukee M12 FPTR Handleiding

10 April 2024

Milwaukee M12 FHIR38 Handleiding

10 April 2024

Milwaukee M12 FIR12 Handleiding

10 April 2024

Milwaukee M18 BI Handleiding

10 April 2024

Milwaukee C18 PCG Handleiding

3 April 2024

Milwaukee WCE 30 Handleiding

19 Maart 2024

Milwaukee STC46-1 Handleiding

19 Maart 2024

Milwaukee STC30-1 Handleiding

19 Maart 2024

Milwaukee M12 C4 Handleiding

19 Maart 2024

Milwaukee M28 C Handleiding

19 Maart 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive IAN 327221 Handleiding

1 Mei 2024

Samsung UN32J4001AF Handleiding

1 Mei 2024

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024

Fakir Artemis TS 150 Handleiding

26 April 2024

Sony UTX-M03 Handleiding

26 April 2024

Sony URX-P03 Handleiding

26 April 2024

Sony WRU-806B Handleiding

26 April 2024

Sony UTX-B03 Handleiding

26 April 2024

Sony UTX-P03 Handleiding

26 April 2024

Sony ODS-L10 Handleiding

26 April 2024