Milwaukee 48-22-4260 Handleiding

Bekijk gratis de handleiding van Milwaukee 48-22-4260 (22 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 84 mensen en kreeg gemiddeld 4.9 sterren uit 2 reviews. Heb je een vraag over Milwaukee 48-22-4260 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

CLOSE QUARTER COPPER TUBING CUTTERSJune 2017

54-49-3161

REVISED BULLETIN

SERVICE PARTS LIST

BULLETIN NO.

DATE

CATALOG NO. 48-22-4260 1/2" Close Quarter Copper Tubing Cutter

48-22-4261 3/4" Close Quarter Copper Tubing Cutter

48-22-4262 1" Close Quarter Copper Tubing Cutter

SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS

EXAMPLE:

Component Parts

(Small #) Are Included

When Ordering The

Assembly (Large #).

0

00

MILWAUKEE TOOL lwww.milwaukeetool.com

13135 W. Lisbon Road, Brookeld, WI 53005

Drwg. 1

For 48-22-4260

1/2" CLOSE QUARTER COPPER TUBING CUTTER

FIG. PART NO. DESCRIPTION OF PART NO. REQ.

1 --------------- Spring (1)

2 --------------- Roller Pin (2)

3 --------------- Roller (2)

4 --------------- Blade Pin (1)

5 --------------- Pan Head Phillips Screw (2)

6 14-46-4266 Spring/Roller/Pin Service Kit (1)

7 48-22-4266 Replacement Cutter Wheel (Set of 2) (Accessory) (1)

For 48-22-4261

3/4" CLOSE QUARTER COPPER TUBING CUTTER

FIG. PART NO. DESCRIPTION OF PART NO. REQ.

1 --------------- Spring (1)

2 --------------- Roller Pin (2)

3 --------------- Roller (2)

4 --------------- Blade Pin (1)

5 --------------- Pan Head Phillips Screw (2)

6 14-46-4267 Spring/Roller/Pin Service Kit (1)

7 48-22-4266 Replacement Cutter Wheel (Set of 2) (Accessory) (1)

For 48-22-4262

1" CLOSE QUARTER COPPER TUBING CUTTER

FIG. PART NO. DESCRIPTION OF PART NO. REQ.

1 --------------- Spring (1)

2 --------------- Roller Pin (2)

3 --------------- Roller (2)

4 --------------- Blade Pin (1)

5 --------------- Pan Head Phillips Screw (2)

6 14-46-4268 Spring/Roller/Pin Service Kit (1)

7 48-22-4266 Replacement Cutter Wheel (Set of 2) (Accessory) (1)

Screws (2x)

Bottom Housing with

Left Cam pressed in

Blade

Top Housing

with Right Cam

pressed in

Blade Pin

Roller Pins (2x)

Rollers (2x)

Spring

= KIT COMPONENTS

1 2 3

4 5

6

It is recommended to use a cotton

swab to clean the cam slot on both

housing halves of any grease prior

to reinstalling blade and blade pin

Cam Slot

Cam

1

2

3

4

5

7

Right

Cam

Place leg of spring

in hole of top

housing.

Place roller pins in holes of top housing.

Place rollers over pins.

Place blade pin in front of

spring and on top of

right cam. Place

blade over pin.

Put bottom

housing in place.

Secure with screws.

Top

Housing

Product specificaties