Milwaukee 2466-20 Handleiding
Milwaukee
Moersleutels
2466-20
Lees hieronder de đź“– handleiding in het Nederlandse voor Milwaukee 2466-20 (20 pagina's) in de categorie Moersleutels. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/20
Cat. No. / No de cat.
2465-20, 2466-20
M12 FUEL™ DIGITAL TORQUE WRENCHES WITH ONE-KEY™
CLES DYNAMOMETRIQUES DIGITALES M12 FUEL™ AVEC
ONE-KEY™
LLAVES DE TORQUE DIGITAL M12 FUEL™ CON ONE-KEY™
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
3
eyes, additionally seek medical help. Liquid ejected
from the battery may cause irritation or burns.
• Do not use a battery pack or tool that is damaged or
modiîšżed. Damaged or modiîšżed batteries may exhibit
unpredictable behavior resulting in îšżre, explosion or
risk of injury.
• Do not expose a battery pack or tool to re or exces-
sive temperature. Exposure to îšżre or temperature
above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range speciîšżed in the instructions. Charging im-
properly or at temperatures outside the speciîšżed range
may damage the battery and increase the risk of îšżre.
SERVICE
• Have your power tool serviced by a qualied repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES FOR
TORQUE WRENCHES
• Power tool gripping surfaces are not insulated.
Not intended for use in an operation where the
fastener may contact hidden wiring. Fasteners
contacting a “live” wire may make exposed metal parts
of the power tool “live” and could give the operator an
electric shock.
• Use only sockets and other accessories speci-
cally designed for use on wrenches and drivers.
Other sockets and accessories might shatter or break
causing injury.
• Do not push the tool trigger handle when gaining
leverage. Adjust your stance and pull on the tool trigger
handle to prevent a possible fall while applying torque.
• Never use extensions, such as a pipe, on the trig-
ger handle of the tool. This could cause damage to
the tool or personal injury due to slippage.
•Over-torquing can cause damage. Do not ex the
head of the tool for leverage. Excessive force on
the tool in anyway will cause permanent damage.
•Damaged accessories can cause injury. Inspect
accessories to insure a snug îšżt on fasteners to prevent
slippage. Ensure the accessories being used are rated
for the torque being applied.
• Always ensure the ratchet Forward/Reverse toggle
is fully engaged. Misuse of this function will cause
damage to the tool.
•Apply torque slowly and rmly grasp the trigger
handle of the tool. Do not apply pressure to the end
of trigger handle. This may result in damage to the tool.
• Always verify the calibration of the tool if its
capacity has been overloaded or dropped. Refer
to the calibration section for more information.
• Store tool in a dry place. This tool is not waterproof
and can be damaged when submerged in liquids.
•Do not drop the tool. This could result in serious
damage and may leave the tool inoperable.
•Do not use this tool as a hammer. Impacts could
damage the tool and will make it inoperable.
•Keep this tool away from magnets.
• Check that the tool capacity matches or exceeds
the use of the application before proceeding.
Failure to do so may result in damage to the tool.
•Do not overload the tool. This will result in the tool
being uncalibrated and will need to be serviced at a
service center.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing, contact
a MILWAUKEE service facility for a free replacement.
•
WARNING
Some dust created by power sanding,
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
îšżlter out microscopic particles.
FUNCTIONAL DESCRIPTION
1. Trigger handle
2. Paddle switch
3. Lock switch
4. Coin cell door (not shown)
5. LED light
6. Square drive anvil
7. Forward/Reverse toggle
8. Boot
9. LCD
10. Menu
11. Battery gauge
12. Arrow buttons
13. Power button
14. Exit button
15. Saved reports button
7
6
10
8
11 13
14
15
16
20 19 17
18
34 2
19
5
12
16. OK button
17. Saved reports
18. Target torque
19. Torque range
20. Progress light bar
Product specificaties
| Merk: | Milwaukee |
| Categorie: | Moersleutels |
| Model: | 2466-20 |
Heb je hulp nodig?
Als je hulp nodig hebt met Milwaukee 2466-20 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Moersleutels Milwaukee
4 Oktober 2022
Andere handleidingen Milwaukee
16 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024