Milwaukee 0235-21 Handleiding

Milwaukee Boormachine 0235-21

Lees hieronder de 📖 handleiding in het Nederlandse voor Milwaukee 0235-21 (23 pagina's) in de categorie Boormachine. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/23

TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND

OPERATOR'S MANUAL.

AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET

BIEN COMPRENDRE LE MANUEL DE L'UTILISATEUR.

PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER

EL MANUAL DEL OPERADOR.

OPERATOR'S MANUAL

MANUEL DE L'UTILISATEUR

MANUAL DEL OPERADOR

Catalog No.

No de Catalogue

Catálogo No.

HEAVY-DUTY MAGNUM DRILLS

EXTRA ROBUSTE PERCEUSES MAGNUM

TALADROS MAGNUM HEAVY-DUTY

0233-20

0234-1

0234-6

0235-21

0235-6

0236-6

0244-1

1. Hold power tools by insulated grip-

ping surfaces when performing an

operation where the cutting tool

may contact hidden wiring or its

own cord. Contact with a “live” wire

will make exposed metal parts of the

tool “live” and shock the operator.

2. Use auxiliary handles supplied

with the tool. Loss of control can

cause personal injury.

3. Wear ear protectors with impact

drills. Exposure to noise can cause

hearing loss.

4. Maintain labels and nameplates.

These carry important information. If un-

readable or missing, contact a MILWAU-

KEE service facility for a free replace-

ment.

5. WARNING! Some dust created by power

sanding, sawing, grinding, drilling, and

other construction activities contains

chemicals known to cause cancer, birth

defects or other reproductive harm.

Some examples of these chemicals are:

• lead from lead-based paint

• crystalline silica from bricks and ce-

ment and other masonry products, and

• arsenic and chromium from chemi-

cally-treated lumber.

Your risk from these exposures varies,

depending on how often you do this

type of work. To reduce your exposure

to these chemicals: work in a well ven-

tilated area, and work with approved

safety equipment, such as those dust

masks that are specifically designed to

filter out microscopic particles.

SPECIFIC SAFETY RULES

POWER TOOL USE AND CARE

16. Do not force the power tool. Use

the correct power tool for your ap-

plication. The correct power tool will

do the job better and safer at the rate

for which it was designed.

17. Do not use the power tool if the

switch does not turn it on and off.

Any power tool that cannot be con-

trolled with the switch is dangerous

and must be repaired.

18. Disconnect the plug from the

power source and/or the battery

pack from the power tool before

making any adjustments, chang-

ing accessories, or storing power

tools. Such preventive safety mea-

sures reduce the risk of starting the

tool accidentally.

19. Store idle power tools out of the

reach of children and do not al-

low persons unfamiliar with the

power tools or these instructions

to operate power tools. Power

tools are dangerous in the hands of

untrained users.

20. Maintain power tools. Check for

misalignment or binding of mov-

ing parts, breakage of parts and

any other condition that may af-

fect the power tool's operation. If

damaged, have the power tool

repaired before use. Many acci-

dents are caused by poorly maintained

power tools.

21. Keep cutting tools sharp and

clean. Properly maintained cutting

tools with sharp cutting edges are less

likely to bind and are easier to control.

22. Use the power tool, accessories

and tool bits etc., in accordance

with these instructions and in the

manner intended for the particu-

lar type of power tool, taking into

account the working conditions

and the work to be performed. Use

SERVICE

23. Have your power tool serviced by

a qualified repair person using

only identical replacement parts.

This will ensure that the safety of the

power tool is maintained.

WORK AREA SAFETY

ELECTRICAL SAFETY

PERSONAL SAFETY

WARNING!

READ ALL INSTRUCTIONS

Failure to follow all instructions listed below may result in electric shock, fire

and/or serious injury. The term "power tool" in all of the warnings listed

below refers to your mains-operated (corded) power tool or battery-

opearted (cordless) power tool.

SAVE THESE INSTRUCTIONS

GENERAL SAFETY RULES-FOR ALL POWER TOOLS

1. Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

2. Do not operate power tools in ex-

plosive atmospheres, such as in

the presence of flammable liq-

uids, gases, or dust. Power tools

create sparks which may ignite the dust

or fumes.

3. Keep children and bystanders

away while operating a power tool.

Distractions can cause you to lose

control.

4. Power tool plugs must match the

outlet. Never modify the plug in any

way. Do not use any adapter plugs

with earthed (grounded) power

tools. Unmodified plugs and matching

outlets will reduce risk of electric shock.

5. Avoid body contact with earthed

or grounded surfaces such as

pipes, radiators, ranges and re-

frigerators. There is an increased

risk of electric shock if your body is

earthed or grounded.

6. Do not expose power tools to rain

or wet conditions. Water entering a

power tool will increase the risk of

electric shock.

7. Do not abuse the cord. Never use

the cord for carrying, pulling, or

unplugging the power tool. Keep

cord away from heat, oil, sharp

edges, or moving parts. Damaged

or entangled cords increase the risk of

electric shock.

9. Stay alert, watch what you are do-

ing and use common sense when

operating a power tool. Do not use

a power tool while you are tired or

under the influence of drugs, al-

cohol or medication. A moment of

inattention while operating power tools

may result in serious personal injury.

10. Use safety equipment. Always

wear eye protection. Safety equip-

ment such as dust mask, non-skid

safety shoes, hard hat, or hearing pro-

tection used for appropriate conditions

will reduce personal injuries.

11. Avoid accidental starting. Ensure

the switch is in the off-position

before plugging in. Carrying tools

with your finger on the switch or plug-

ging in power tools that have the

switch on invites accidents.

12. Remove any adjusting key or

wrench before turning the power

tool on. A wrench or a key left at-

tached to a rotating part of the power

tool may result in personal injury.

13. Do not overreach. Keep proper

footing and balance at all times.

This enables better control of the

power tool in unexpected situations.

14. Dress properly. Do not wear loose

clothing or jewellery. Keep your

hair, clothing and gloves away from

moving parts. Loose clothes,

8. When operating a power tool out-

doors, use an extension cord suit-

able for outdoor use. Use of a cord

suitable for outdoor use reduces the

risk of electric shock.

jewellery, or long hair can be caught in

moving parts.

15. If devices are provided for the

connection of dust extraction and

collection facilities, ensure these

are connected and properly used.

Use of these devices can reduce dust-

related hazards.

of the power tool for operations differ-

ent from those intended could result in

a hazardous situation.

Amps

5.5

No Load

RPM

0-2800

without RAD 0-850

RAD low 0-565

RAD high 0-1275

without RAD 0-850

RAD low 0-565

RAD high 0-1275

0-850

without RAD 0-850

RAD low 0-565

RAD high 0-1275

without RAD 0-600

RAD low 0-400

RAD high 0-900

Volts

120

Cat.

No.

0233-20

0234-1

0234-6

0235-21

0235-6

0236-6

0244-1

Amperes

Double Insulated

Symbology

Canadian Standards

Association

Underwriters

Laboratories, Inc.

Volts Alternating

Current

No Load Revolutions

per Minute (RPM)

Specifications

Right Angle Drive Unit Cat. No. 48-06-2871

Mexican Approvals

Marking

FUNCTIONAL DESCRIPTION

1. Chuck

2. Nameplate

3. Trigger

4. Forward/Reverse

switch

5. Side handle

The grounding prong in the plug is con-

nected through the green wire inside the

cord to the grounding system in the tool.

The green wire in the cord must be the

only wire connected to the tool's ground-

ing system and must never be attached to

an electrically “live” terminal.

Your tool must be plugged into an appro-

priate outlet, properly installed and

grounded in accordance with all codes and

ordinances. The plug and outlet should look

like those in Figure A.

Double Insulated Tools:

Tools with Two Prong Plugs

Tools marked “Double Insulated” do not re-

quire grounding. They have a special

double insulation system which satisfies

OSHA requirements and complies with the

applicable standards of Underwriters Labo-

ratories, Inc., the Canadian Standard As-

sociation and the National Electrical Code.

Double Insulated tools may be used in ei-

ther of the 120 volt outlets shown in

Figures B and C.

Grounded Tools:

Tools with Three Prong Plugs

Tools marked “Grounding Required” have

a three wire cord and three prong ground-

ing plug. The plug must be connected to a

properly grounded outlet (See Figure A). If

the tool should electrically malfunction or

break down, grounding provides a low re-

sistance path to carry electricity away from

the user, reducing the risk of electric shock.

Fig. B Fig. C

Fig. A

Improperly connecting the

grounding wire can result in the

risk of electric shock. Check

with a qualified electrician if you

are in doubt as to whether the

outlet is properly grounded. Do

not modify the plug provided

with the tool. Never remove the

grounding prong from the plug.

Do not use the tool if the cord or

plug is damaged. If damaged,

have it repaired by a MILWAUKEE

service facility before use. If the

plug will not fit the outlet, have a

proper outlet installed by a

qualified electrician.

GROUNDING

WARNING!

Product specificaties

Merk:	Milwaukee
Categorie:	Boormachine
Model:	0235-21

Heb je hulp nodig?

Als je hulp nodig hebt met Milwaukee 0235-21 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Boormachine Milwaukee

Milwaukee M18 ONEDD3 Handleiding

16 April 2024

Milwaukee M18 BLH Handleiding

10 April 2024

Milwaukee K 900 S Handleiding

10 April 2024

Milwaukee M18 FRAD2 Handleiding

10 April 2024

Milwaukee K 750 S Handleiding

10 April 2024

Milwaukee M12 FPDX Handleiding

10 April 2024

Milwaukee K 700 S Handleiding

10 April 2024

Milwaukee M12 FDDX Handleiding

10 April 2024

Milwaukee M18 BLHACD26 Handleiding

10 April 2024

Milwaukee K 500 S Handleiding

10 April 2024

Handleiding Boormachine

Nieuwste handleidingen voor Boormachine

Bavaria By Einhell BSM 710E Handleiding

9 April 2024

Bavaria By Einhell BAS 12 Vario Handleiding

9 April 2024

Bavaria By Einhell BPAS 18-2/1 HA Handleiding

9 April 2024

Festool KHC 18 Handleiding

9 April 2024

Bavaria By Einhell BFMR 1100 Handleiding

9 April 2024

Bavaria By Einhell BPAS 18 AK Handleiding

9 April 2024

Bavaria By Einhell BAS 18-2/1HA Handleiding

9 April 2024

Bavaria By Einhell BAS 18 Handleiding

9 April 2024

Bavaria By Einhell BAS 20,4 Handleiding

9 April 2024

Bavaria By Einhell BPAS 18-1/1H Handleiding

9 April 2024