Mikrotik Woobm-USB Handleiding

Bekijk gratis de handleiding van Mikrotik Woobm-USB (3 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 89 mensen en kreeg gemiddeld 4.4 sterren uit 7 reviews. Heb je een vraag over Mikrotik Woobm-USB of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Woobm-USB

The Woobm is a WiFi-to-serial bridge. This device enables wireless access to RouterBOARD devices which have a

USB port, but do not have wireless interfaces. The device operates in 2GHz 802.11b/g/n wireless mode, and

supports both client and access point modes, which can be protected with a WPA wireless password.

Powering

The device accepts powering from the USB port of the RouterBOARD device.

Setup

1.Plug the Woobm into the USB port of a RouterBOARD device.

2.Set your computer IP configuration to automatic (DHCP).

3.From your PC or smartphone, connect to the wireless network name “WoobmAP”.

4.Once connected to the wireless network, open http://192.168.4.1 in your web browser, since there is no

password by default, you will be logged in automatically.

Configuration

The Woobm runs a special operating system where you can configure it’s basic functionality, the configuration is

accessible through a web interface. To connect to the RouterBOARD device, the following methods are available:

1.Click on “Terminal” in the Woobm web configuration interface.

2.Open a Telnet connection to the Woobm device from your computer, you will be directly connected to the

RouterBOARD device.

For more detailed instructions, please see full Woobm software documentation on http://mt.lv/help

Buttons and jumpers

The Woobm has one button, which has the following functions:

Reset: remove the device from the USB port, press the button, plug in the device, while holding the button.

Release the button when the LED light starts flashing red to restore factory defaults.

WPS: press the button once, while it is working. This will enable WPS for 5 seconds.

Operating system support

The device supports Woobm software only. It can be updated, by uploading a newer .BIN file through the web

configuration page.

See mikrotik.com for more information. Contact [email protected]28-Nov-17

Product specificaties