Mikrotik G1040A-60WF Handleiding

Bekijk gratis de handleiding van Mikrotik G1040A-60WF (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 10 mensen en kreeg gemiddeld 5.0 sterren uit 7 reviews. Heb je een vraag over Mikrotik G1040A-60WF of wil je andere gebruikers van dit product iets vragen? Stel een vraag

G1040A-60WN

G1040A-60WN

Safety information

Before you work on any MikroTik equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for

preventing accidents. The installer should be familiar with network structures, terms, and concepts.

This equipment is to be installed by trained and qualified personnel, as per these installation instructions. The installer is responsible for making

sure, that the Installation of the equipment is compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify

the device.

We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate

at your own risk!

In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power cable from the power outlet.

Information

Technical specifications, brochures, and more info about products at https://mikrotik.com/products

If you need help with configuration or installation, please seek a consultant https://mikrotik.com/consultants

Powering

The unit accepts power from an AC source:

Input: 100-240V ~ 50/60Hz.

Output:

DC output voltage (V)12

DC output current (A)5

DC output power (W)60

Installation

Push blue anchor to the right side and pull out old PSU:

Install replacement unit by inserting into position and pushing in until blue anchor locks.

Product specificaties