Mikrotik CAOTS Handleiding

Bekijk gratis de handleiding van Mikrotik CAOTS (2 pagina’s), behorend tot de categorie Tas. Deze gids werd als nuttig beoordeeld door 98 mensen en kreeg gemiddeld 4.0 sterren uit 9 reviews. Heb je een vraag over Mikrotik CAOTS of wil je andere gebruikers van dit product iets vragen? Stel een vraag

RouterBOARD Small Outdoor Case

Installation Guide and Warranty Information

Case and Mounting Kit

The RouterBOARD you have received, is shipped with the

following parts:

Assembling the Kit

1.Mount antenna connectors and Ethernet insulator in their

respective holes. Seal the unused holes with the provided

rubber seals and .H I

2.Install the distancers on the baseplate using screws , JC K

according to the drawing below. There are 4 distancers for

mounting a RouterBOARD. Place them on top of the baseplate

in one of the positions marked with the same letter

(placement differs depending on the RouterBOARD type used,

so choose letter A, B, C or D, according to the list below the

drawing) and tightened with screws from underneath. Note

that the baseplate is not symmetric, so it is very important to

place it as seen on the drawing.exactly

A – RouterBOARD 532

B – RouterBOARD 133

C – RouterBOARD 112

D – reserved for future products

3.Place the baseplate inside the case box , minding the orientation of the baseplate. Note that if you have installed the C A

baseplate correctly, a hole in the case will match the point O on the drawing. Install the grounding screw in the point G

O. It is supposed to go all the way through the baseplate and through the case. Then fasten the baseplate with screws K

at the points marked as S on the drawing above.

4.Connect all antenna pigtails and Ethernet cords to the RouterBOARD and secure it on the previously installed distancers

with the screws . Note that the RouterBOARD must be oriented with it's Ethernet ports towards the “CONNECTORS” K

mark on the drawing above.

See www.routerboard.com for more information. Contact support@mikrotik.com for support questions.rev. E (2-Sep-2010)

Item B (1 pcs). Cover

Item C (1 pcs). Baseplate

Item D (2 pcs). Mounting rail

Item A (1 pcs). Base

Item E(1 pcs).

Rubber isolation

cord

CD

D

D

D

A

B

Item F(4 pcs).

Case screw M4

Item G(1 pcs).

Ground screw M4

Item H(1 pcs).

Ethernet seal

Item I(2 pcs).

Antenna sealItem J(4 pcs).

Distancer

Item K(12 pcs).

Inner screw M3

Item L(1 pcs).

Lock washer M4Item M(1 pcs).

Wing nut M4

A

AA

B

BB

CONNECTORS

C

C

C

Item N(3 pcs).

Mounting screwItem O(13 pcs).

Washer M4Item P(2 pcs).

Mounting ring

O

S

S

S

S

Product specificaties