Miiego MiiSOUND Handleiding


Bekijk gratis de handleiding van Miiego MiiSOUND (20 pagina’s), behorend tot de categorie Hoofdtelefoon. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.5 sterren uit 1.5 reviews. Heb je een vraag over Miiego MiiSOUND of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/20
Quick Start Guide
ENG
DK
NOR
SE
1 - 2
3 - 4
7 - 8
FR
-
1
211
-
1
09
DE - 1413
LN
MiiSOUND
WIRELESS PORTABLE SPEAKER
ENG
1
2
3
5
4
7
8
6
1
This device contains a lithium accumulator.
Improper use can cause erheating and fire. ov
SPECIFICATIONS
BT v5.3. Rechargeable 6000 mAh Li-ion battery. Full charging time: 4 hours.
Battery playing time: up to 8 hours per charge (depending on volume level).
Frequency range: 2.402-2.480 MHz. Freq.
Response: 80Hz-12 KHz. Charging input power: 5V DC/1.5A.
RMS audio output: 20W. Output Peak Power: 40W. Impedance: 4 . Ω
CARE, MAINTENANCE, SAFETY
Any modification of the product may have consequences for safety, warranty
and proper functioning. Keep out of reach for children and animals. Product
storage and working temperature: from -5 Celsius degrees to +40. Do not
expose the product to direct sunlight, heat or naked flames as it may cause
damage or explosion. Do not use the product if a part is damaged or defective.
Replace a damaged or defective device immediately. Disconnect the product
from the electrical outlet and other equipment if problems occur. Do not
charge when the product is wet. Do not leave a battery on prolonged charge
when not in use. Do not dismantle, open or shred batteries. Do not drop the
product and avoid bumping. This product may only be serviced by a qualified
technician for maintenance to reduce the risk of electric shock etc.
9
10
11
12
13
14
15
button: Power On/ Off.
TWS
Volume
Mode (BT/ AUX/ USB/ TF).
Play / Pause
Party Lights control-button
Bass Boost (Standard/ Bass)
Previous song
Next song
AUX IN
USB port in
TF card slot
Wired Microphone Port
LED indicator for Charging
Charging Port
10 11 12 13
1514
1 2 4 5
3
76 8 9
ENG
2
Pairing your MiiSOUND wireless speaker
1: Make sure the speaker is charged and turned OFF.
2: Press and hold the button for 2 seconds to turn the speaker on.
3: Activate BT on your phone or other device and search for new device and
select: ®. MiiSOUND by MIIEGO
The speaker will remember your phone/device and automatically reconnect
the next time you turn it on.
An unpaired speaker will automatically turn off after 15 minutes.
Charging the MiiSOUND speaker
Use a 5V DC/1.5A USB adapter for charging.
When the Red light is on, the speaker is charging.
When the Red light is off, the speaker is fully charged.
Full charging time is around 4 hours.
Next time charging
When you hear a warning tone every 180 seconds, the battery status is low
and needs charging.
Turning Your MiiSOUND On and Off
ON: Press and hold the Button for 2 seconds until a tone is heard.
OFF: Press and hold the Button for 2 seconds until a tone is heard.
Pairing and connecting 2 x MiiSOUND speakers with TWS
TWS only works when connecting two together. MiiSOUNDs
1: Turn on both speakers (BT mode). Make sure they are unconnected and
within 10 meters distance.
2: Press button 2 (TWS) once on one speaker. The speaker emits a tone to
indicate entering TWS-pairing mode.
3: The other speaker will then automatically wirelessly connect to the first
speaker.
4: Then activate BT on your phone and connect with the other speaker.


Product specificaties

Merk: Miiego
Categorie: Hoofdtelefoon
Model: MiiSOUND

Heb je hulp nodig?

Als je hulp nodig hebt met Miiego MiiSOUND stel dan hieronder een vraag en andere gebruikers zullen je antwoorden