Miele TWF720 WP Handleiding

Miele Wasdroger TWF720 WP

Lees hieronder de 📖 handleiding in het Nederlandse voor Miele TWF720 WP (4 pagina's) in de categorie Wasdroger. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

Using for the first time Operation Drying Fragrance flacon

M.-Nr. 11 495 23000

3. Loading the tumble dryer

ĺOpen the door.

ĺUnfold the laundry and load

loosely into the drum.

Do not overload the drum.

Overloading can cause

unnecessary wear and tear of

the laundry,

give a disappointing

drying result and cause more

creasing.

If you are not using a fragrance

flacon: the tabs must be pushed

down completely (see arrows) to

ensure both sockets are closed.

ĺShut the door with a gentle

swing.

When closing the door, make

sure that laundry does not get

trapped in the door opening.

FragranceDos – the dryer has two

positions for inserting a fragrance flacon.

Use one or both whenever you want to

add a pleasant fragrance to your laundry.

Close the unused socket.

Before using a fragrance flacon, please

read "Warning and Safety instructions

- Using a fragrance flacon (optional

accessory)" and "Fragrance flacon" in

the operating instructions.

Inserting a fragrance flacon

1. 2.

3. 4.

Markers and must line up with  

each other.

5. 6.

ĺTurn the outer ring clockwise a little.

Markers und must line up with  

each other.

Before drying

ĺTurn the outer

ring clockwise

a little.

The further you open the flacon, the

more intense the fragrance.

After drying

To avoid the fragrance escaping

needlessly:

ĺTurn the outer

ring anti-clock-

wise until

marker is in 

position .

When not in use, you can store the

fragrance flacon in its original

packaging.

Before cleaning the fluff filters

ĺRemove the

fragrance

flacon.

ĺOnly store the

fragrance

flacon in its

original

packaging.

Never lay the fragrance flacon down.

Otherwise, the fragrance will leak out.

Changing the programme sequence

TWF 720 WP en - AU, NZ

1 Condensed water container

– Empty after every drying programme

2 Door

3 Control panel

4 Access panel for the heat exchanger and plinth filter

– Do not open during drying

5 Cool air intake grille

– Do not obstruct with a laundry basket or other objects

OPERATION

DRYING

CHANGING THE PROGRAMME SEQUENCE

3. Selecting a programme and starting it

Selecting a programme

ĺTurn the programme selector.

–The dryer is switched on.

–A drying level may light up and durations will appear in

the time display.

Programmes with drying levels

–Cottons, Minimum iron, Delicates, Shirts, Express,

Denim, Bed linen, Pre-ironing

ĺTouch the sensor for the drying

level you want. It then lights up

brightly.

Any drying level can be selected

for the and Cottons, Express,

Bed linen programmes. A lim-

ited range is available with the

other programmes.

Other programmes and timed drying programmes

–Cottons Woollens handcare, Proofing , 

The drying level / duration is preset by the dryer

automatically and cannot be altered.

– Warm air

ĺTouch the sensor repeatedly 

until the required programme

duration appears in the display.

You can set the duration in

10-minute increments from

0:20 minutes up to 2:00 hours.

ĺYou can reduce the duration with the sensor.

1. Notes on correct laundry care

ɒDamage due to foreign objects.

Foreign objects left in the laundry can melt, burn, or

explode.

Ensure that any foreign objects (e.g. detergent

dispensing balls, lighters, etc.) have been removed from

the laundry.

ĺSort the laundry according to the type of fibre and

weave, size, garment care label symbol and the drying

level required.

ĺUntangle the laundry.

ĺCheck seams and stitching to ensure that padding and

linings are intact.

ĺFasten duvet covers and pillow cases to prevent small

items from being rolled up inside them.

ĺFasten hooks and eyes.

ĺTie together textile belts and apron ties.

ĺSew in or remove loosened underwiring from bras.

Adding or removing laundry

You have forgotten an item of laundry, but

the programme has already started.

ĺTouch the sensor.Start/Add laundry

Add* will light up in the time display.

ĺOpen the door.

ĺAdd or remove laundry.

ĺClose the door.

ĺTouch the sensor.Start/Add laundry

The programme will start.

* Exceptions:

In some cases, e.g. during the cooling

phase or in the programme, you Proofing

cannot add laundry.

–In these cases will not light up.Add

Cancelling or changing the current

programme

It is no longer possible to change the

selected programme. This prevents the

appliance being operated unintentionally,

e.g. by children.

If you adjust the programme selector, 

will light up in the time display.

 goes out when you select the original

programme again.

ĺTurn the programme selector to the

position.

The programme is cancelled.

ĺSelect a new programme.

ĺTouch the sensor.Start/Add laundry

Select (if required).Gentle tumble

Delicate fabrics (with the symbol on the 

care label, e.g. acrylic garments) are dried

at a lower temperature with a longer

programme duration.

ĺTouch the sensor. It then Gentle tumble

lights up brightly.

Selecting Delay start (if required)

With Delay start you can delay the start of

the programme by up to a maximum of

24hours.

Delay start cannot be used with the Warm

air programme.

ĺTouch the .

It then lights up

brightly.

ĺTouch the or sensors repeatedly  

until the required Delay start time appears

in the display.

Starting a programme

ĺTouch the flashing Start/Add laundry

sensor. It will light up.

Energy saving:

After 10 minutes the indicators dim and

the sensor starts Start/Add laundry

flashing.

ĺTouch the sensor to Start/Add laundry

switch the indicators on again (this does

not have any effect on a running

programme).

4. Removing the laundry at the

end of the programme

End of programme: lights up in the 

time display and the Start/Add laundry

sensor goes out.

–Energy saving: After 10 minutes the

indicators dim and the Start/Add laundry

sensor starts flashing.

–The dryer will switch off automatically

15minutes after the end of the

Anti-crease phase (with programmes

without an Anti-crease phase it will switch

off 15minutes after the end of the

programme).

ɒDo not open the door before the end

of the programme.

ĺOpen the door.

ĺRemove the laundry.

ɒCheck that all items have been

removed from the drum. If items are left

in the dryer, they could be damaged by

overdrying when the dryer is used the

next time.

If the dryer is switched on at the mains and

the door is opened, the drum lighting will

come on. It will go out after a few minutes

to save energy.

ĺTurn the programme selector to .

ĺClean the fluff filters.

ĺShut the door with a gentle swing.

ĺEmpty the condensed water container.Adding laundry

You can add laundry.

ĺFollow the instructions in "Changing the

programme sequence".

Energy saving tips

To avoid unnecessarily long drying times

and high consumption of energy:

–Spin the laundry at the maximum spin

speed in the washing machine.

Clean the fluff filters in the door and

in the door opening after every drying

cycle.

–Load according to the optimum

amount of laundry recommended for

the programme being used. This will

mean that the energy consumption for

the amount of laundry is at its most

economical.

–Make sure the room temperature is not

too high.

If there are other heat producing

appliances in the room in which the

tumble dryer is located, make sure the

room is well-ventilated and switch the

other appliances off, if possible.

1 Control panel

The , , and sensors react to 2 4 6 7

fingertip contact.

Selection is possible as long as the

respective sensor is illuminated.

–If a sensor is brightly lit, this means:

currently selected

–If a sensor is dimly lit, this means:

selection possible

2 Sensors for the drying levels

After selecting a drying level programme

with the programme selector: touch one

of the sensors to select a drying level.

3 Indicator lights   

–  light up if necessary:

see "Problem solving guide".

– Perfect Dry:

The Perfect Dry system measures the

residual moisture present in the

laundry in programmes with

selectable

drying levels and provides a more

precise drying result.

After starting the programme, this

message...

...will flash until the programme

duration has been determined, and

then go out.

...will light up when the selected

drying level is reached near the end of

the programme.

...will remain dark with the

following programmes: Woollens

handcare, Warm air.

4 Gentle tumble sensor

For drying temperature-sensitive textiles

with the symbol.

5 Time display

The remaining programme duration will

be displayed in hours and minutes.

6 Sensors   

–After touching the sensor, a later 

start time for the programme (Delay

start) can be selected.

–The and sensors are used for  

selecting the duration of the Delay

start period or the duration of the

Warm air programme.

7 Start/Add laundry sensor

Touching the sensor Start/Add laundry

starts the selected programme. The

current programme can be interrupted to

add laundry. The sensor flashes slowly

as soon as it is possible for a

programme to be started and then lights

up constantly after the programme has

started.

8 Optical interface

For service technicians.

9 Programme selector

The programme selector can be turned

clockwise or anti-clockwise.

The dryer is switched on by selecting a

programme, and switched off by turning

the programme selector to the 

position.

ɒBefore using the tumble dryer for

the first time, ensure that it is correctly

installed and connected.

Please read the separate operating

instructions supplied with the appliance.

ɒDamage caused by switching the

appliance on too soon.

This can damage the heat pump.

After setting up the tumble dryer, wait for

at least one hour before starting a drying

programme.

Emptying the condensed water

container

Empty the condensed water container

after every drying programme.

The indicator will light up when the 

maximum level in the condensed water

container is reached.

To switch the indicator light off: Open 

and close the door while the dryer is

switched on.

Damage to the door and fascia panel.

The door and the fascia panel can be

damaged when removing the condensed

water container.

Always close the door completely.

ĺPull out the

condensed water

container.

ĺTo prevent water running out, keep it in a

horizontal position when carrying it. Hold

it at the front and at the back.

ĺEmpty the con-

densed water

container.

ĺReplace the

container in the

dryer.

Do not drink condensed water. It can

cause health problems in people and

animals.

en - AU, NZ M.-Nr. 11 495 230

Quick Start Guide

Heat pump tumble dryer

These short instructions are not a substitute for the operating instructions supplied with

the appliance. Please read the operating instructions supplied with your tumble dryer

before using it for the first time.

Take note of the Warning and Safety instructions, as well as the full descriptions on how to

use your appliance.

Cleaning and care Problem solving guide

Fluff filters

Removing visible fluff

Clean the fluff filters in the door opening

after every drying cycle.

Remove the fragrance flacon (if fitted).

ĺPull the upper

fluff filter forwards

to remove it.

ĺUse your fin-

gers or a vac-

uum cleaner to

remove the fluff

from the surface

of the filter.

ĺPush the upper fluff filter back in until it

clicks into position.

ĺClose the door.

Cleaning the fluff filters and air flow

openings thoroughly

If the drying duration has become longer

or the surface of the filters is visibly

compacted with fluff, you should carry out

the following cleaning procedure.

ĺPull the upper fluff filter forward to remove

it.

ĺTurn the yellow

dial on the lower

fluff filter in the

direction of the

arrow (until you

hear it click).

ĺHold the dial and

pull the fluff fil-

ter forwards to

remove it.

ĺUse a vacuum

cleaner with a

long crevice noz-

zle attached to

remove any visi-

ble fluff from the

upper air flow

openings.

ĺFlush the fluff filters through with warm

running water.

ĺShake the fluff filters thoroughly and then

dry them carefully.

Ensure the filters are dry before

replacing them. Wet filters could cause

operational faults.

ĺRefit all of the fluff filters and close the

door.

CLEANING AND CARE

PROBLEM SOLVING GUIDE

Programme overview

PROGRAMME CHART

Garment care label symbols

Drying

Normal ⁄ higher temperature

Reduced temperature: select Gentle

tumble (for delicate fabrics).

Do not tumble dry

Ironing

very hot

hot

warm

Do not iron

Tips on drying

–Always observe the maximum recommended loads given in the

Programme chart.

Overloading can cause unnecessary wear and tear to the

laundry. It can give a disappointing drying result and cause more

creasing.

–Do not load the drum with items that are still soaking wet. Make

sure your laundry is spun at the maximum spin speed in the

washing machine before drying.

–Minimum iron fabric tends to crease more, the larger the load.

This is particularly the case for garments made from very fine

weave fabric, such as shirts or blouses.

Plinth filter

Only clean the plinth filter when the 

indicator lights up.

To turn the indicator light off: Open and 

close the door while the dryer is switched

on.

ĺPress the round,

indented area on

the heat

exchanger access

panel to open it.

The panel will

spring open.

ĺPull the plinth filter

out by the handle.

Removing the plinth filter will cause a

guide pin in the dryer to come out. This pin

ensures that the heat exchanger access

panel can only be closed if the plinth filter is

fitted.

ĺPull the handle

out of the plinth

filter.

ĺClean the filter

thoroughly under

running water.

ĺCarefully squeeze the water out of the

plinth filter.

The plinth filter must not be replaced

dripping wet.

ĺUse a damp

cloth to remove

any fluff from the

access panel.

Checking the heat exchanger unit

ɒRisk of injury from sharp cooling fins.

You could cut yourself.

Do not touch the cooling fins.

ĺCarefully vacuum

up any visible fluff

or dirt.

Refitting the plinth filter

ĺFit the filter back

on the handle the

right way.

ĺInsert the handle

with the plinth fil-

ter attached over

the two guide

pins.

The word Miele on the handle must be the

correct way up.

ĺClose the heat exchanger access panel.

Programme

Load

(weight of dry

laundry)

Items

Extra dry

Normal

Hand iron

Machine iron

Gentle tumble

Cottons 8 kg Cotton items such as those described under Cottons Normal with normal

residual moisture

X –

Cottons 8 kg Towelling, jersey wear, T-shirts, underwear, baby clothes, workwear,

covers, jackets, bathrobes, and flannelette bed linen

Warning: Do not use for jersey fabrics (e.g. T-shirts, underwear, Extra dry

baby clothes), as they have a tendency to shrink.

X X X X X

Minimum iron 4 kg Workwear, overalls, pullovers, dresses, trousers, leggings and table linen – X X – X

Delicates 2.5 kg Shirts, blouses, lingerie, appliquéd garments – X X – Always active

Woollens

handcare

2 kg Pullovers, cardigans, socks, stockings – – – – –

Shirts 2 kg Shirts and blouses – X X – X

Express 4 kg Garments suitable for the programme X X X X –Cottons

Denim 3 kg Jeans, jackets, skirts, shirts – X X – X

Bed linen 4 kg Bed linen X X X X –

Proofing 2.5 kg Microfibre fabric, skiwear, outerwear, fine close weave cotton garments

(poplin), tablecloths

Fire hazard! Do not use proofing agents containing paraffin.

– X – – –

Pre-ironing 1 kg Cotton trousers, anoraks, shirts – X X – Always active

Warm air 8 kg Thick and multi-layered jackets, pillows, sleeping bags, blankets – – – – X

X = Yes, – = No

Problem/Fault message Possible cause and remedy

 lights up after a pro-

gramme is cancelled

The condensed water container is full or there is a kink in the

drain hose.

ĺEmpty the condensed water container.

ĺCheck the drain hose.

To switch off :

ĺOpen and close the door (with the dryer switched on).

 lights up at the end

of a programme

There is a build-up of fluff (see "Cleaning and Care").

ĺClean the fluff filters.

ĺClean the plinth filter.

To switch off :

ĺOpen and close the door (with the dryer switched on).

 lights up The programme selector has been moved.

ĺSelect the original programme again. The time remaining

will appear in the display.

Bars flash in the dis-

play at the end of a pro-

gramme: ……

…

The programme has finished but the laundry has not yet

cooled down.

ĺEither remove the laundry and spread it out to cool down

or leave it in the tumble dryer to cool down during the

cooling phase.

 flashes/lights up

after the tumble dryer

is switched on and a

programme cannot be

selected

Access via a code has been activated.

ĺYou must enter the correct code to use the tumble dryer.

See "Programmable functions - PIN Code" in the 

operating instructions.

The display is dark and

only the Start/Add laun-

dry sensor is flashing

This is not a fault, but a normal function.

ĺTouch a sensor to switch on the indicators.

See "Programmable functions - Control panel standby 

status" in the operating instructions.

The drum will turn at intervals in the Anti-crease phase.

Problem/Fault message Possible cause and remedy

The dryer is switched

off at the end of the

programme

The tumble dryer switches off automatically. This is not a

fault, but a normal function.

The laundry is not suffi-

ciently dry

The load consisted of different types of fabric.

ĺFinish drying using the timed drying programme.Warm air

ĺSelect a more suitable programme next time.

Tip: You can alter the drying levels for some programmes.

See "Programmable functions - Cotton drying levels" and 

" Minimum iron drying levels" in the operating 

instructions.

Items made of synthetic

fibres are charged with

static electricity after

drying

Synthetic fibres tend to attract static charge.

Static charge can be reduced by adding fabric softener to

the final rinse in the washing programme.

There is a build-up of

fluff

Fluff is principally the result of friction when garments are

being worn and to some extent when they are being washed.

Machine drying hardly causes any fluff to form.

Fluff is collected by the fluff filters and the plinth filter and can

be removed easily.

See "Cleaning and care".

There are humming

noises

This is not a fault.

These noises are normal and caused by the operation of the

compressor.

Product specificaties

Merk:	Miele
Categorie:	Wasdroger
Model:	TWF720 WP

Heb je hulp nodig?

Als je hulp nodig hebt met Miele TWF720 WP stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Wasdroger Miele

Miele TKB140 WP Eco Handleiding

16 April 2024

Miele TKB550 WP Eco Handleiding

8 April 2024

Miele PDR 1108 SmartBiz Handleiding

5 April 2024

Miele TMB 340 WP Eco Handleiding

3 April 2024

Miele TDA 140 C Handleiding

5 Maart 2024

Miele T 8813 C Edition 111 Handleiding

15 Februari 2024

Miele TWC560WP Handleiding

4 Januari 2024

Miele TKB 150 WP Eco Handleiding

30 December 2023

Miele Novotronic T 7644 C Handleiding

5 Oktober 2023

Miele TWD364WP Handleiding

30 Juni 2023

Handleiding Wasdroger

Nieuwste handleidingen voor Wasdroger

AEG TR9H92BY Handleiding

28 April 2024

AEG TR8D83GW Handleiding

28 April 2024

AEG TR7T60699 Handleiding

28 April 2024

AEG TR719G4E Handleiding

27 April 2024

Stirling STR-CD60 Handleiding

26 April 2024

Hotpoint HTX26EASWWW Handleiding

18 April 2024

Hotpoint HTX26GASWWW Handleiding

18 April 2024

Bosch WQB245B0UC Handleiding

17 April 2024

Samsung DV90CGC0A0TH Handleiding

17 April 2024

GE GTD48GASWWB Handleiding

16 April 2024