Midland MicroMobile MXTA24 Handleiding

Bekijk gratis de handleiding van Midland MicroMobile MXTA24 (1 pagina’s), behorend tot de categorie Radio. Deze gids werd als nuttig beoordeeld door 73 mensen. Heb je een vraag over Midland MicroMobile MXTA24 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

5900 Parretta Drive ● KANSAS CITY, MO ● 64120

PHONE: (816) 241-8500 ● FAX: (816) 241-5713

EMAIL: mail@midlandradio.com

WEBSITE: midlandusa.com

Midland Radio Corporation

midlandusa.com

10/16/2022

MXTA24 Assembly Diagram

1.The MXTA24 is designed for mounng brackets or surfaces 1/8” to 1/4" thick. Thinner materials may

require some stainless washer(s) below the surface for proper spacing.

2.The MXTA24 can be installed directly in a 3/8” hole, or in the 5/8” hole on some brackets using the

included nylon spacer, part B. The two ears on Part D help keep the assembly centered in a 3/4" hole.

3.Part D should be installed on part E before inserng from below the bracket or mounng surface.

4.Part B is only needed if using a bracket with a 5/8” hole. It should be inserted in the 5/8” hole from the

topside of the bracket.

5.Part A is installed on top of the bracket (and Part B if used) or mounng surface with the wrench ats up

and the O-ring down. The rubber O-ring on the boom of part A acts as a seal to prevent water entering

the mounng surface hole. Maximum torque: 16 lb-.

6.The center conductor of Part E should end up 1/32” to 3/16” proud of Part A to properly interface with

the NMO style antenna. Tighten the antenna by hand, to just snug.

A) 1 1/8" - 18 UNEF NMO Nut

B) 3/8" by 5/8" Bushing for 5/8" Hole (Optional)

C) Mounting Surface/Bracket, 1/8" to 1/4" Thick

D) Toothed Saddle Washer

E) 3/8" - 24 UNF Right Angle Coaxial NMO Interface

Product specificaties