Middle Atlantic Products VRS Handleiding

Middle Atlantic Products Niet gecategoriseerd VRS

Lees hieronder de 📖 handleiding in het Nederlandse voor Middle Atlantic Products VRS (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8

I-00366 Rev B

THANK YOU

Thank you for purchasing the VRS Vertical Rackmount System. Please read these instructions

thoroughly before installing/assembling this product.

PRODUCT FEATURES

- Adjustable rackmount system allows easy placement of cable boxes in a vertical position

- Cable boxes are clamped in place and evenly spaced, using adjustable plastic spacers

in the top and bottom shelves

- Can hold up to 7 components such as satellite or cable boxes, depending on size

- Permits space between the units which allows for ventilation

NOTE: Most cable and satellite receivers are designed to be mounted horizontally.

Special Consideration must be given to proper thermal management when mounting

vertically

URFACE

1) PRE-INSTALLATION SIZING/REAR RETAINER BAR INSTALLATION

Place the rackshelf onto a flat surface. Place your first and last cable boxes onto the rackshelf as shown.

Slide the boxes until they are flush with the front rackears. This is to determine where to place the rear

retainer bar, which will secure the components from the back. (FIGURE A)

SUPPLIED HARDWARE

(D)

FIGURE A

Page 2

Rear Retainer Bar

(A)

(B)

(C)

(D)

Plastic Spacer

8-32 Nuts

8-32 Studs

QTY

Front Retainer Bar

(Used for Transportation)

(E)

Page 3

4) INSTALL BOTTOM RACKSHELF

Install to rackrail as shown. (FIGURE C)

NOTE: The lip of the rackshelf

aligns with the bottom of the

lowest rackspace (to equal two

rackspaces because the ear

alone is less than two rackspaces)

2) SECURE REAR RETAINER BAR

Position the rear of the components flush with the front ears. Secure the rear retainer bar using the supplied

hardware as shown. (FIGURE B)

NOTE: If using the front retainer bar, do not fully tighten rear retainer bar hardware

3) REMOVE COMPONENTS

Once the rear retainer bar is installed, remove the boxes to mount the shelf to the rackrail.

FIGURE B

FIGURE C

EAR

RACKSHELF

LIP

RACKSPACE

= 2 RACKSPACES

INSTALLATION CONTINUED

Product specificaties

Merk:	Middle Atlantic Products
Categorie:	Niet gecategoriseerd
Model:	VRS
Kleur van het product:	Zwart
Breedte:	482.6 mm
Diepte:	390.525 mm
Hoogte:	88.9 mm
Maximale gewichtscapaciteit:	15.87 kg
Certificering:	Greenguard
Duurzaamheidscertificaten:	RoHS
Code geharmoniseerd systeem (HS):	85389099