Middle Atlantic Products UD1 Handleiding

Middle Atlantic Products Niet gecategoriseerd UD1

Lees hieronder de 📖 handleiding in het Nederlandse voor Middle Atlantic Products UD1 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

I-00333 Page 1 Rev -

THANK YOU

Thank you for purchasing the UD1 one rackspace drawer. Please read these instructions

thoroughly before installing/assembling this product.

PRODUCT FEATURES

- Reversible design allows the drawer to be flipped over for use as a slide-out shelf for the

the following applications: writing surface, laptop and keyboard holder.

- Cable knockout at rear of drawer allows for efficient routing of cabling.

SUPPLIED HARDWARE

(2) 10-32 Wing nuts

(4) 6-32 X .25 Self threading screws

(2) 10-32 X .5 Pan head machine screws

(4) #10 X .625 Pan head wood screws

(2) Side mounting brackets (For wood installation)

(2) Rear mount brackets (For use with

Rackrail)

INSTALLATION WITH REAR MOUNTING BRACKETS (USE WITH REAR RAIL)

1) Position drawer in rack before attaching rear mounting brackets.

2) With drawer positioned in the rack, attach the supplied rear mounting brackets to each side as shown

using the supplied hardware. (FIGURE A )

3) Install drawer to the front and rear rackrails

as shown. (FIGURE B)

REAR MOUNTING

BRACKET

WING NUT

PAN HEAD

MACHINE

SCREW

FIGURE A

REAR MOUNTING

BRACKET

FIGURE B

RACKRAIL

SCREW

(sold separately)

Page 2

NOTE: Drawer weight capacity is 50 pounds.

15.5" - 20.5"

INSTALLATION WITH SIDE MOUNTING BRACKETS (USE WITH WOOD RACKS/CASES)

1) Attach the drawer to the front rackrail before attaching the side mounting brackets

2) Attach the side mounting brackets to the drawer and then attach to the sides of the rack

as shown using the supplied hardware. (FIGURE C)

CONVERTING FROM DRAWER TO SHELF AFTER INSTALLATION

1) Open the drawer and simultaneously push the right side quick release latch down and the left side

latch up, and slide the drawer out from the tracks. (FIGURE D)

2) Flip the drawer over and insert onto the tracks. Close the shelf to lock it on the tracks.

QUICK RELEASE LATCH

(BOTH SIDES)

NOTE: The above steps are the same for converting from shelf to drawer.

SIDE MOUNTING

BRACKET

FRONT MOUNTING

BRACKET

PAN HEAD

WOOD SCREW

FIGURE C

FIGURE D

ATTACH TO FRONT

RACKRAIL

Page 3

SELF THREADING

SCREW (DO NOT

OVERTIGHTEN)

SIDE MOUNTING

BRACKET

Product specificaties

Merk:	Middle Atlantic Products
Categorie:	Niet gecategoriseerd
Model:	UD1
Kleur van het product:	Zwart
Breedte:	482.6 mm
Diepte:	412.75 mm
Hoogte:	44.45 mm
Gewicht verpakking:	5170 g
Breedte verpakking:	635 mm
Diepte verpakking:	660.4 mm
Hoogte verpakking:	127 mm
Soort:	Ladeblok
Materiaal behuizing:	Staal
Maximale gewichtscapaciteit:	23 kg
Certificering:	Greenguard
Duurzaamheidscertificaten:	RoHS
Aantal per verpakking:	1 stuk(s)
Rackcapaciteit:	1U
Code geharmoniseerd systeem (HS):	85389099
Inbouwdiepte (max):	520.7 mm
Inbouwdiepte (min):	393.7 mm