Middle Atlantic Products IFTA-3 Handleiding

Middle Atlantic Products Niet gecategoriseerd IFTA-3

Lees hieronder de 📖 handleiding in het Nederlandse voor Middle Atlantic Products IFTA-3 (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5

I-00456 Rev -

THANK YOU

Thank you for purchasing the Fan Tray System. Please read these instructions thoroughly before installing

this product

This Fan Tray is designed to work in conjunction with your overall thermal management system by moving hot air

away from hot spots.

PRODUCT FEATURES

- Occupies one rackspace

- Fans can be placed anywhere on tray body, adjustable in half or full fan-width increments

- Adjustable depth allows fan tray to be adjusted from front to rear, 457 mm to 812 mm depth

- Energy-saving thermostatic control for automatic on/off when needed

(3 Fan System)

(6 Fan System)

Page 2

FAN TRAY OPERATION

Versatile chassis allows fans to be locacted exactly where the heat is by mounting the chassis

in the front or rear, and/or by moving fans within the grid provided.

RELOCATION OF FANS AND CONTROL MODULE

After determining desired fan locations, adjust the positions of fans and panels as needed.

Fans and panels are removable by pushing rivets out from bottom as shown. (FIGURE A)

NOTE: If a fan is needed in the same location as the fan controller, it can be relocated as needed.

All spaces MUST be occupied by fans or filler panels to achieve proper thermal management

(FIGURE A)

Page 3

FAN TRAY INSTALLATION

The Fan Tray can be installed in one of 2 orientations depending on heat source. (FIGURE B)

FRONT

OR REAR

REAR

OR FRONT

1) After determining the rackspace and direction in which you

are mounting the fan tray, mount the support ears first using

four rack screws (four places). (FIGURE C)

2) Slide the Fan Tray onto the ears from the other side,

then add four rack screws, securing the unit

in place. (FIGURE D)

(FIGURE D)

(FIGURE C)

(FIGURE B)

Product specificaties

Merk:	Middle Atlantic Products
Categorie:	Niet gecategoriseerd
Model:	IFTA-3
Kleur van het product:	Zwart
Breedte:	482.6 mm
Diepte:	459.7 mm
Hoogte:	44.45 mm
Gewicht verpakking:	6170 g
Breedte verpakking:	539.8 mm
Diepte verpakking:	514.4 mm
Hoogte verpakking:	127 mm
Soort:	Ventilatieplateau
Materiaal behuizing:	Staal
Ingebouwde ventilator:	Ja
Duurzaamheidscertificaten:	RoHS
Aantal per verpakking:	1 stuk(s)
Ingangsspanning:	230 V
Aantal ventilatoren:	3 ventilator(en)
Rackcapaciteit:	1U
AC-ingangsfrequentie:	50 - 60 Hz
Code geharmoniseerd systeem (HS):	85389099
Inbouwdiepte (max):	812.8 mm
Inbouwdiepte (min):	457.2 mm