Microchip TC642 Handleiding

Bekijk gratis de handleiding van Microchip TC642 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 52 mensen en kreeg gemiddeld 4.7 sterren uit 4 reviews. Heb je een vraag over Microchip TC642 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Fan Speed Controller and Fan Fault Detector Family

The and are TC642, TC646, TC647, TC648 TC649

fan speed controller products that support external

temperature input.

The and TC642B, TC646B, TC647B, TC648B TC649B

are fan speed controller products that support external

temperature input and incorporate a fan auto-restart

function.

The and are fan speed TC654, TC655, TC664 TC665

controller products that support external temperature

input and two-wire serial communication.

The , and devices are TC64X, TC64XB, TC65X TC66X

pulse width modulation (PWM) fan speed controllers

for DC brushless fans. These devices adjust the speed

of the fan according to the temperature level, thereby

reducing acoustic noise, minimizing power consumption,

and extending fan life. A thermistor or other temperature

dependent voltage output device can be used to supply

the VIN voltage, which sets the required duty cycle

drive signal on VOUT. The TC654/TC655 and TC664/

TC665 products allow the user to control fan speed

and communicate data via a Standard Management

Bus (SMBus) interface. These devices also enable the

user to read fan RPM data and implement predictive fan

failure detection. The entire family features a pulse width

modulation (PWM) frequency of 30 Hz (CF = 1 µF) and an

operating current of less than 0.5 mA.

This family is fully specified from 3.0V to 5.5V over a

-40°C to +85°C temperature range. Numerous features

address a broad spectrum of applications, such as,

shutdown mode for further power savings, FanSense™

technology for fan fault detection, auto-shutdown for

automatic fan shut-off, minimum fan speed for constant

cooling and over temperature alert for overheating

detection. The TC64X and TC64XB devices are available

in 8-pin

PDIP

, MSOP and SOIC packages. The TC65X and

TC66X are available in a 10-pin MSOP package.

These products are ideal for every application utilizing

DC fans, especially where acoustic noise and fan

reliability are critical. Suitable applications include

computers, projectors, servers, datacom equipment,

telecom equipment, power supplies, set-top boxes, fan

racks and test equipment.

Features:

• Temperature proportional fan speed control

•FanSense™ technology protects against fan and

system failure

•3.0V to 5.5V supply voltage range

•Low operating current

•30 Hz pulse width modulation (PWM) frequency

(CF = 1 µF)

•Support low cost NTC/PTC thermistors

•Shutdown mode

•Fan auto-restart (TC64XB devices only)

•Read RPM data (TC654/TC655, TC664/TC665)

•SMBus interface (TC654/TC655, TC664/TC665)

• Temperature range: -40°C to +85°C

• Available in PDI

P

, MSOPand SOIC packages

Application Notes:

•AN764 Implementing Temperature-based Variable

Fan Speed Control in NLX Power Supplies

•AN768 Redundant Fan Systems using the TC642

Fan Manager

•AN770 Linear Voltage Fan Speed Control using

Microchip’s TC64X family

•AN771 Suppressing Acoustic Noise in Pulse Width

Modulation Fan Speed Control Systems

•AN772 Speed Error in Pulse Width Modulation Fan

Control Systems

Product specificaties