Microchip RN2903 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Microchip RN2903 (61 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/61
2015-2018 Microchip Technology Inc. Advance Information DS40001811B
RN2903 LoRa® Technology
Module Command Reference
Users Guide
DS40001811B-page 2 Advance Information 2015-2018 Microchip Technology Inc.
Information contained in this publication regarding device
applications and the like is provided only for your convenience
and may be superseded by updates. It is your responsibility to
ensure that your application meets with your specifications.
MICROCHIP MAKES NO REPRESENTATIONS OR
WARRANTIES OF ANY KIND WHETHER EXPRESS OR
IMPLIED, WRITTEN OR ORAL, STATUTORY OR
OTHERWISE, RELATED TO THE INFORMATION,
INCLUDING BUT NOT LIMITED TO ITS CONDITION,
QUALITY, PERFORMANCE, MERCHANTABILITY OR
FITNESS FOR PURPOSE. Microchip disclaims all liability
arising from this information and its use. Use of Microchip
devices in life support and/or safety applications is entirely at
the buyer’s risk, and the buyer agrees to defend, indemnify and
hold harmless Microchip from any and all damages, claims,
suits, or expenses resulting from such use. No licenses are
conveyed, implicitly or otherwise, under any Microchip
intellectual property rights unless otherwise stated.
Note the following details of the code protection feature on Microchip devices:
Microchip products meet the specification contained in their particular Microchip Data Sheet.
Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the
intended manner and under normal conditions.
There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our
knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data
Sheets. Most likely, the person doing so is engaged in theft of intellectual property.
Microchip is willing to work with the customer who is concerned about the integrity of their code.
Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not
mean that we are guaranteeing the product as “unbreakable.”
Code protection is constantly evolving. We at Microchip are co ng the code protection features ofmmitted to continuously improvi our
products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts
allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.
Microchip received ISO/TS-16949:2009 certification for its worldwide
headquarters, design and wafer fabrication facilities in Chandler and
Tempe, Arizona; Gresham, Oregon and design centers in California
and India. The Company’s quality system processes and procedures
are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping
devices, Serial EEPROMs, microperipherals, nonvolatile memory and
analog products. In addition, Microchip’s quality system for the design
and manufacture of development systems is ISO 9001:2000 certified.
QUALITY MANAGEMENT S
YSTEM
CERTIFIED BY DNV
==
==
==
====
ISO/TS 16949
==
==
==
====
Trademarks
The Microchip name and logo, the Microchip logo, AnyRate, AVR,
AVR logo, AVR Freaks, BitCloud, CryptoMemory, CryptoRF,
dsPIC, FlashFlex, flexPWR, Heldo, JukeBlox, KeeLoq, Kleer,
LANCheck, LINK MD, maXStylus, maXTouch, MediaLB,
megaAVR, MOST, MOST logo, MPLAB, OptoLyzer, PIC,
picoPower, PICSTART, PIC32 logo, Prochip Designer, QTouch,
SAM-BA, SpyNIC, SST, SST Logo, SuperFlash, tinyAVR, UNI/O,
and XMEGA are registered trademarks of Microchip Technology
Incorporated in the U.S.A. and other countries.
ClockWorks, The Embedded Control Solutions Company,
EtherSynch, Hyper Speed Control, HyperLight Load, IntelliMOS,
mTouch, Precision Edge, and Quiet-Wire are registered
trademarks of Microchip Technology Incorporated in the U.S.A.
Adjacent Key Suppression, AKS, Analog-for-the-Digital Age, Any
Capacitor, AnyIn, AnyOut, BodyCom, chipKIT, chipKIT logo,
CodeGuard, CryptoAuthentication, CryptoAutomotive,
CryptoCompanion, CryptoController, dsPICDEM, dsPICDEM.net,
Dynamic Average Matching, DAM, ECAN, EtherGREEN, In-
Circuit Serial Programming, ICSP, INICnet, Inter-Chip
Connectivity, JitterBlocker, KleerNet, KleerNet logo, memBrain,
Mindi, MiWi, motorBench, MPASM, MPF, MPLAB Certified logo,
MPLIB, MPLINK, MultiTRAK, NetDetach, Omniscient Code
Generation, PICDEM, PICDEM.net, PICkit, PICtail, PowerSmart,
PureSilicon, QMatrix, REAL ICE, Ripple Blocker, SAM-ICE, Serial
Quad I/O, SMART-I.S., SQI, SuperSwitcher, SuperSwitcher II,
Total Endurance, TSHARC, USBCheck, VariSense, ViewSpan,
WiperLock, Wireless DNA, and ZENA are trademarks of
Microchip Technology Incorporated in the U.S.A. and other
countries.
SQTP is a service mark of Microchip Technology Incorporated in
the U.S.A.
Silicon Storage Technology is a registered trademark of Microchip
Technology Inc. in other countries.
GestIC is a registered trademarks of Microchip Technology
Germany II GmbH & Co. KG, a subsidiary of Microchip
Technology Inc., in other countries.
All other trademarks mentioned herein are property of their
respective companies.
© 2015-2018, Microchip Technology Incorporated, All Rights
Reserved.
ISBN:
RN2903 LoRa TECHNOLOGY MODULE
COMMAND REFERENCE USERS GUIDE
2015-2018 Microchip Technology Inc. Advance Information DS40001811B-page 3
Table of Contents
Preface ........................................................................................................................... 6
Chapter 1. Introduction
1.1 Overview ...................................................................................................... 11
1.2 Features ....................................................................................................... 12
1.3 Configuration ................................................................................................ 12
1.4 UART Interface ............................................................................................. 13
Chapter 2. Command Reference
2.1 Command Syntax ......................................................................................... 15
2.2 Command Organization ............................................................................... 15
2.3 System Commands ...................................................................................... 16
2.3.1 sys sleep <length> .................................................................................... 17
2.3.2 sys reset .................................................................................................... 17
2.3.3 sys eraseFW ............................................................................................. 17
2.3.4 sys factoryRESET ..................................................................................... 17
2.3.5 System Set Commands ............................................................................. 18
2.3.5.1 sys set nvm <address> <data> ................................................. 18
2.3.5.2 sys set pindig <pinname> <pinstate> ........................................ 18
2.3.5.3 sys set pinmode <pinname> <pinmode> ................................... 19
2.3.6 System Get Commands ............................................................................ 19
2.3.6.1 sys get ver ................................................................................. 19
2.3.6.2 sys get nvm <address> ............................................................. 19
2.3.6.3 sys get vdd ................................................................................ 20
2.3.6.4 sys get hweui ............................................................................. 20
2.3.6.5 sys get pindig <pinname> .......................................................... 20
2.3.6.6 sys get pinana <pinname> ........................................................ 20
2.4 MAC Commands .......................................................................................... 21
2.4.1 mac reset ................................................................................................... 21
2.4.2 mac tx <type> <portno> <data> ................................................................ 21
2.4.3 mac join <mode> ....................................................................................... 23
2.4.4 mac save ................................................................................................... 24
2.4.5 mac forceENABLE .................................................................................... 25
2.4.6 mac pause ................................................................................................. 25
2.4.7 mac resume ............................................................................................... 25
2.4.8 MAC Set Commands ................................................................................ 26
2.4.8.1 mac set appkey <appKey> ........................................................ 26
2.4.8.2 mac set appskey <appSessKey> .............................................. 27
2.4.8.3 mac set ar <state> ..................................................................... 27
2.4.8.4 mac set bat <level> ................................................................... 27
2.4.8.5 MAC Set Channel Commands .................................................. 28
2.4.8.6 mac set class <class> .............................................................. 28
2.4.8.7 mac set devaddr <address> ..................................................... 29


Product specificaties

Merk: Microchip
Categorie: Niet gecategoriseerd
Model: RN2903

Heb je hulp nodig?

Als je hulp nodig hebt met Microchip RN2903 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Microchip

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd