Microchip MIC5219 Handleiding

Bekijk gratis de handleiding van Microchip MIC5219 (32 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 17 mensen en kreeg gemiddeld 4.2 sterren uit 5 reviews. Heb je een vraag over Microchip MIC5219 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

DS20006021A-page 1 2018 Microchip Technology Inc.

MIC5219

Features

•500mA Output Current Capability

-SOT23-5 Package - 500 mA Peak

-2 mm x 2mm x 0.9mm VDFN Package -

500 mA Continuous

-2 mm x 2 mm x 0.6mm Thin DFN Package -

500 mA Continuous

-MSOP-8 Package - 500mA Continuous

•Low 500mV Maximum Dropout Voltage at Full

Load

•Extremely Tight Load and Line Regulation

•Tiny SOT-23-5 and Power MSOP-8 Package

•Ultra-Low Noise Output

•Low Temperature Coefficient

•Current and Thermal Limiting

•Reversed-Battery Protection

•CMOS/TTL-Compatible Enable/Shutdown Control

•Near-Zero Shutdown Current

Applications

•Laptop, Notebook, and Palmtop Computers

•Cellular Telephones and Battery-Powered

Equipment

•Consumer and Personal Electronics

•PC Card VCC and VPPRegulation and Switching

•SMPS Post-Regulator/DC-to-DC Modules

•High-Efficiency Linear Power Supplies

General Description

The MIC5219 is an efficient linear voltage regulator

with high peak output current capability, very low

dropout voltage, and better than 1% output voltage

accuracy. Dropout is typically 10mV at light loads and

less than 500 mV at full load.

The MIC5219 is designed to provide a peak output

current for start-up conditions where higher inrush

current is demanded. It features a 500mA peak output

rating. Continuous output current is limited only by

package and layout.

The MIC5219 can be enabled or shut down by a

CMOS- or TTL-compatible signal. When disabled,

power consumption drops nearly to zero. Dropout

ground current is minimized to help prolong battery life.

Other key features include reversed-battery protection,

current limiting, overtemperature shutdown, and low

noise performance with an ultra-low noise option.

The MIC5219 is available in adjustable or fixed output

voltages in the space-saving 6-pin (2 mm × 2 mm)

VDFN, 6-pin (2 mm × 2mm) Thin DFN, SOT23-5, and

8-pin power MSOP packages. For higher power

requirements see the MIC5209 or MIC5237.

500mA Peak Output LDO Regulator

Product specificaties