Microchip MCP23S08 Handleiding


Pagina's 44 Engels Niet gecategoriseerd

Bekijk de handleiding van Microchip MCP23S08 gratis online of download de PDF. 33 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag

2004-2022 Microchip Technology Inc. and its subsidiariesDS20001919G-page 1
MCP23008/MCP23S08
Features
•AEC-Q100 Qualified
•8-Bit Remote Bidirectional I/O Port (Pin GP7 is
output only for MCP23008)
-I/O pins default to input
•High-Speed I2C Interface (MCP23008)
-100 kHz
-400 kHz
-1.7 MHz
•High-Speed SPI Interface (MCP23S08)
-10 MHz
•Hardware Address Pins
-Three for the MCP23008 to allow up to eight
devices on the bus
-Two for the MCP23S08 to allow up to four
devices using the same Chip Select
•Configurable Interrupt Output Pin
-Configurable as active-high, active-low or
open-drain
•Configurable Interrupt Source
-Interrupt-on-change from configured defaults
or pin change
•Polarity Inversion Register to Configure the
Polarity of the Input Port Data
•External Reset Input
•Low Standby Current: 1 µA (max.)
•Operating Voltage:
-1.8V to 5.5V at -40°C to +85°C
I2C at 100kHz
SPI at 5MHz
-2.7V to 5.5V at -40°C to +85°C
I2C at 400kHz
SPI at 10MHz
-4.5V to 5.5V at -40°C to +125°C
I2C at 1.7kHz
SPI at 10MHz
Packages
•18-pin PDIP (300 mil)
•18-pin SOIC (300 mil)
•20-pin SSOP
•20-pin QFN
Block Diagram
GP0
GP1
GP2
GP3
GP4
GP5
GP6
GP7
Serial
Control
GPIO
SCL
SDA
RESET
INT
8
Configuration/
8
A2:A0 3
Control
Registers
Serializer/
Deserializer
Interrupt
Logic
VDD
VSS
POR
Decode
Interface
SCK
SI
SO
MCP23S08
MCP23008
A1:A0
MCP23S08
8-Bit I/O Expander with Serial Interface

Beoordeel deze handleiding


Product specificaties

Merk: Microchip
Categorie: Niet gecategoriseerd
Model: MCP23S08

Heb je hulp nodig?

Als je hulp nodig hebt met Microchip MCP23S08 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden