Microchip MCP1801 Handleiding

Microchip Niet gecategoriseerd MCP1801

Lees hieronder de 📖 handleiding in het Nederlandse voor Microchip MCP1801 (28 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28

 2010 Microchip Technology Inc. DS22051D-page 1

MCP1801

Features:

• 150 mA Maximum Output Current

• Low Dropout Voltage, 200 mV typical @ 100 mA

• 25 µA Typical Quiescent Current

• 0.01 µA Typical Shutdown Current

• Input Operating Voltage Range: 2.0V to 10.0V

• Standard Output Voltage Options:

- 0.9V, 1.2V, 1.8V, 2.5V, 3.0V, 3.3V, 5.0V, 6.0V

• Output Voltage Accuracy:

- ±2% (VR > 1.5V), ±30 mV (VR  1.5V)

• Stable with Ceramic Output Capacitors

• Current Limit Protection

• Shutdown Pin

• High PSRR: 70 dB typical @ 10 kHz

Applications:

• Battery-powered Devices

• Battery-powered Alarm Circuits

• Smoke Detectors

• CO2 Detectors

• Pagers and Cellular Phones

• Wireless Communications Equipment

• Smart Battery Packs

• Low Quiescent Current Voltage Reference

• PDAs

• Digital Cameras

• Microcontroller Power

• Solar-Powered Instruments

• Consumer Products

• Battery Powered Data Loggers

Related Literature:

• AN765, “Using Microchip’s Micropower LDOs”,

DS00765, Microchip Technology Inc., 2002

• AN766, “Pin-Compatible CMOS Upgrades to

BiPolar LDOs”, DS00766,

Microchip Technology Inc., 2002

• AN792, “A Method to Determine How Much

Power a SOT23 Can Dissipate in an Application”,

DS00792, Microchip Technology Inc., 2001

Description:

The MCP1801 is a family of CMOS low dropout (LDO)

voltage regulators that can deliver up to 150 mA of

current while consuming only 25 µA of quiescent

current (typical). The input operating range is specified

from 2.0V to 10.0V, making it an ideal choice for two to

six primary cell battery-powered applications, 9V

alkaline and one or two cell Li-Ion-powered

applications.

The MCP1801 is capable of delivering 100 mA with

only 200 mV (typical) of input to output voltage

differential (VOUT = 3.3V). The output voltage tolerance

of the MCP1801 at +25°C is typically ±0.4% with a

maximum of ±2%. Line regulation is ±0.01% typical at

+25°C.

The LDO output is stable with a minimum of 1 µF of

output capacitance. Ceramic, tantalum, or aluminum

electrolytic capacitors can all be used for input and

output. Overcurrent limit with current foldback provides

short-circuit protection. A shutdown (SHDN) function

allows the output to be enabled or disabled. When

disabled, the MCP1801 draws only 0.01 µA of current

(typical).

The MCP1801 is available in a SOT-23-5 package.

Package Types

SOT-23-5

123

5 4

VOUT NC

VIN SHDNVSS

150 mA, High PSRR, Low Quiescent Current LDO

MCP1801

DS22051D-page 2  2010 Microchip Technology Inc.

Functional Block Diagram

Typical Application Circuit

MCP1801

VIN VOUT

GND

+VIN

Error Amplifier

Voltage

Reference Current Limiter

Shutdown

Control

SHDN

+VIN

MCP1801

VIN

CIN

1 µF

COUT

1 µF Ceramic

Battery

VOUT

GND

SHDN

Ceramic

OUT

3.3V @ 40 mA

 2010 Microchip Technology Inc. DS22051D-page 3

MCP1801

1.0 ELECTRICAL

CHARACTERISTICS

Absolute Maximum Ratings †

Input Voltage ................................................................. +12V

Output Current (Continuous) ..................... PD/(VIN-VOUT)mA

Output Current (Peak) ............................................... 500 mA

Output Voltage ............................... (V

SS-0.3V) to (VIN+0.3V)

SHDN Voltage..................................(V

SS-0.3V) to (VIN+0.3V)

Continuous Power Dissipation:

SOT-23-5 .............................................................. 250 mW

† Notice: Stresses above those listed under “Maximum

Ratings” may cause permanent damage to the device.

This is a stress rating only and functional operation of

the device at those or any other conditions above those

indicated in the operational listings of this specification

is not implied. Exposure to maximum rating conditions

for extended periods may affect device reliability.

ELECTRICAL CHARACTERISTICS

Electrical Specifications: Unless otherwise specified, all limits are established for V IN = VR + 1.0V, Note 1, COUT = 1 µF (X7R),

CIN = 1 µF (X7R), VSHDN = VIN, TA = +25°C.

Parameters Sym Min Typ Max Units Conditions

Input / Output Characteristics

Input Operating Voltage VIN 2.0 — 10.0 V Note 1

Input Quiescent Current Iq— 25 50 µA IL = 0 mA

Shutdown Current ISHDN — 0.01 0.10 µA SHDN = 0V

Maximum Output Current IOUT_mA 150 — — mA

Current Limiter ILIMIT — 300 — mA if VR  1.75V, then VIN = VR + 2.0V

Output Short Circuit Current IOUT_SC — 50 — mA if VR  1.75V, then VIN = VR + 2.0V

Output Voltage Regulation VOUT VR-2.0% VRVR+2.0% V VR  1.45V, IOUT = 30 mA, Note 2

VR-30 mV VRVR+30 mV VR  1.45V, IOUT = 30 mA

VOUT Temperature Coeffi-

cient

TCVOUT — 100 — ppm/°C IOUT = 30 mA, -40°C TA +85°C,

Note 3

Line Regulation VOUT/

(VOUTX VIN)

-0.2 ±0.01 +0.2 %/V (V R + 1V) VIN 10V, Note 1

VR  1.75V, IOUT = 30 mA

VR  1.75V, IOUT = 10 mA

Load Regulation VOUT/VOUT — 15 50 mV IL = 1.0 mA to 100 mA, Note 4

Dropout Voltage, Note 5 VDROPOUT — 60 90 mV IL = 30 mA, 3.1V VR  6.0V

— 200 250 IL = 100 mA, 3.1V VR  6.0V

— 80 120 IL = 30 mA, 2.0V VR  3.1V

— 240 350 IL = 100 mA, 2.0V VR < 3.1V

— 2.07 - VR2.10 - VRV IL = 30 mA, VR  2.0V

— 2.23 - VR2.33 - VRIL = 100 mA, VR < 2.0V

Power Supply Ripple

Rejection Ratio

PSRR — 70 — dB f = 10 kHz, IL = 50 mA,

VINAC = 1V pk-pk, CIN = 0 µF,

if VR  1.5V, then VIN = 2.5V

Output Noise eN— 0.6 — µV/Hz IOUT =100 mA, f=1 kHz,

COUT=1 µF (X7R Ceramic),

VOUT=3.3V

Note 1: The minimum VIN must meet two conditions: VIN2.0V and VIN (VR + 1.0V).

2: VR is the nominal regulator output voltage. For example: VR = 1.8V, 2.5V, 3.0V, 3.3V, or 5.0V.

The input voltage VIN = V R + 1.0V or ViIN = 2.0V (whichever is greater); IOUT = 100 µA.

3: TCVOUT = (VOUT-HIGH - VOUT-LOW

) *10 6

/ (V R * Temperature), VOUT-HIGH

= highest voltage measured over the

temperature range. VOUT-LOW = lowest voltage measured over the temperature range.

4: Load regulation is measured at a constant junction temperature using low duty cycle pulse testing. Changes in output

voltage due to heating effects are determined using thermal regulation specification TCV OUT

5: Dropout voltage is defined as the input to output differential at which the output voltage drops 2% below its measured

value with an applied input voltage of VR + 1.0V or 2.0V, whichever is greater.

Product specificaties

Merk:	Microchip
Categorie:	Niet gecategoriseerd
Model:	MCP1801

Heb je hulp nodig?

Als je hulp nodig hebt met Microchip MCP1801 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Microchip

Microchip AT32UC3A3256 Handleiding

10 April 2024

Microchip AT32UC3A364 Handleiding

10 April 2024

Microchip AT32UC3B0256 Handleiding

10 April 2024

Microchip AT32UC3A0512 Handleiding

10 April 2024

Microchip AR1010 Handleiding

10 April 2024

Microchip AT32UC3C0256C Handleiding

10 April 2024

Microchip AT32UC3A364S Handleiding

10 April 2024

Microchip AT32UC3C1256C Handleiding

10 April 2024

Microchip AT32UC3A1128 Handleiding

10 April 2024

Microchip AR1100BRD Handleiding

10 April 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive IAN 327221 Handleiding

1 Mei 2024

Samsung UN32J4001AF Handleiding

1 Mei 2024

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024

Fakir Artemis TS 150 Handleiding

26 April 2024

Sony UTX-M03 Handleiding

26 April 2024

Sony URX-P03 Handleiding

26 April 2024

Sony WRU-806B Handleiding

26 April 2024

Sony UTX-B03 Handleiding

26 April 2024

Sony UTX-P03 Handleiding

26 April 2024

Sony ODS-L10 Handleiding

26 April 2024