Microchip DSPIC33EP64MC506 Handleiding

Microchip Niet gecategoriseerd DSPIC33EP64MC506

Lees hieronder de 📖 handleiding in het Nederlandse voor Microchip DSPIC33EP64MC506 (130 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/130
dsPIC33E/PIC24E Family Reference Manual
DS70645C-page 14-2 © 2010-2011 Microchip Technology Inc.
14.1 INTRODUCTION
This section describes the High-Speed Pulse-Width Modulator (PWM) module and its
associated operational modes. The High-Speed PWM module in the dsPIC33E/PIC24E
device family supports a wide variety of PWM modes and is ideal for power
conversion/motor control applications. Some of the common applications include:
AC-to-DC converters
DC-to-DC converters
AC and DC motors: BLDC, PMSM, ACIM, SRM, etc.
• Inverters
Battery chargers
Digital lighting
Uninterrupted Power Supply (UPS)
Power Factor Correction (PFC) (e.g., Interleaved PFC and Bridgeless PFC)
14.2 FEATURES
The High-Speed PWM module consists of the following major features:
Up to seven PWM generators, each with an individual time base
Two PWM outputs per PWM generator
Individual period and duty cycle for each PWM output
Duty cycle, dead time, phase shift and frequency resolution equal to the system clock
source (TOSC)
Independent fault and current-limit inputs for up to 14 PWM outputs
Redundant Output mode
Independent Output mode (this feature is not available on all devices)
Push-Pull Output mode
Complementary Output mode
Center-Aligned PWM mode
Output override control
Special Event Trigger
PWM capture feature
Prescaler for input clock
ADC triggering with PWM
Independent PWM frequency, duty cycle and phase shift changes
Leading-Edge Blanking (LEB) functionality
Dead time compensation
Output clock chopping
Note: This family reference manual section is meant to serve as a complement to device
data sheets. Depending on the device variant, this manual section may not apply to
all dsPIC33E/PIC24E devices.
Please consult the note at the beginning of the “High-Speed PWM” chapter in the
current device data sheet to check whether this document supports the device you
are using.
Device data sheets and family reference manual sections are available for
download from the Microchip Worldwide Web site at: http://www.microchip.com
© 2010-2011 Microchip Technology Inc. DS70645C-page 14-3
Section 14. High-Speed PWM
High-Speed PWM
14
14.3 CONTROL REGISTERS
The following registers control the operation of the High-Speed PWM module:
PTCON: PWM Time Base Control Register
- Enables or disables the High-Speed PWM module
- Sets the Special Event Trigger for the ADC
- Enables or disables immediate period updates
- Selects the synchronizing source for the master time base
- Specifies synchronization settings
PTCON2: PWM Clock Divider Select Register 2
Provides the clock prescaler to the PWM master time base
PTPER: Primary Master Time Base Period Register
Provides the PWM time period value
STCON: PWM Secondary Master Time Base Control Registe (1)
- Enables or disables immediate period updates based on the secondary master time base
- Selects the synchronization source for the secondary master time base
- Specifies the synchronization setting for secondary master time base control
STCON2: PWM Secondary Clock Divider Select Register 2(1)
Provides the clock prescaler to the PWM secondary master time base
STPER: Secondary Master Time Base Period Register(1)
Provides the secondary master time base period value
MDC: PWM Master Duty Cycle Register
Provides the PWM master duty cycle value
SEVTCMP: PWM Special Event Compare Register
Provides the compare value that is used to trigger the ADC module
SSEVTCMP: PWM Secondary Special Event Compare Register(1)
Provides the compare value that is used to trigger the ADC module based on the
secondary master time base
CHOP: PWM Chop Clock Generator Register
- Provides the chop clock frequency
- Enables or disables the chop clock generator
PWMKEY: PWM Unlock Register(1)
Writes the unlock sequence to allow writes to the IOCONx and FCLCONx registers
PWMCONx: PWM Control Register
- Enables or disables fault interrupt, current-limit interrupt and primary trigger interrupt
- Provides the interrupt status for fault interrupt, current-limit interrupt and primary trigger
interrupt
- Selects the type of time base (master time base or independent time base)
- Selects the type of duty cycle (master duty cycle or independent duty cycle)
- Controls Dead Time mode
- Enables or disables Center-Aligned mode
- Controls the external PWM Reset operation
- Enables or disables immediate updates of the duty cycle, phase offset, independent time
base period
IOCONx: PWM I/O Control Register
- Enables or disables PWM pin control feature (PWM control or GPIO)
- Controls fault/current limit override values
- Enables PWMxH and PWMxL pin swapping
- Controls the PWMxH and PWMxL output polarity
- Controls the PWMxH and PWMxL output if any of the following modes is selected:
Complementary mode
Push-Pull mode
True Independent mode
Note: Not all registers are available on all devices. Refer to the “High-Speed PWM”
chapter in the specific device data sheet for availability.


Product specificaties

Merk: Microchip
Categorie: Niet gecategoriseerd
Model: DSPIC33EP64MC506

Heb je hulp nodig?

Als je hulp nodig hebt met Microchip DSPIC33EP64MC506 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Microchip

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd