Microchip dsPIC33CK256MP505 Handleiding
Microchip
Niet gecategoriseerd
dsPIC33CK256MP505
Bekijk gratis de handleiding van Microchip dsPIC33CK256MP505 (131 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 38 mensen en kreeg gemiddeld 4.6 sterren uit 19.5 reviews. Heb je een vraag over Microchip dsPIC33CK256MP505 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/131

HRPWM with Fine Edge
Placement
dsPIC33/PIC24 Family Reference Manual
Introduction
Note: This family reference manual section is meant to serve as a complement to device data sheets. Depending on
the device variant, this manual section may not apply to all dsPIC33 devices. Please consult the note at the
beginning of the chapter in the specific device data sheet to check whether this document supports the device you
are using.
Device data sheets and family reference manual sections are available for download from the Microchip Worldwide
Website at: www.microchip.com.
This document describes the features and use of the High-Resolution Pulse-Width Modulated (PWM) with Fine Edge
Placement. This flexible module provides features to support many types of Motor Control (MC) and Power Control
(PC) applications, including:
• AC-to-DC Converters
• DC-to-DC Converters
• AC and DC Motor Control: Brushed DC, BLDC, PMSM, ACIM, SRM, Stepper, etc.
• Inverters
• Battery Chargers
• Digital Lighting
• Power Factor Correction (PFC)
High-Level Features
• Up to Eight Independent PWM Generators, each with Dual Outputs
• Operating modes:
– Independent Edge PWM mode
– Variable Phase PWM mode
– Independent Edge PWM mode, Dual Output
– Center-Aligned PWM mode
– Double Update Center-Aligned PWM mode
– Dual Edge Center-Aligned PWM mode
• Output modes:
– Complementary
– Independent
– Push-Pull
• Dead-Time Generator
• Dead-Time Compensation
• Leading-Edge Blanking (LEB)
• Output Override for Fault Handling
• Flexible Period/Duty Cycle Updating Options
• PWM Control Inputs (PCI) for PWM Pin Overrides and External PWM Synchronization
• Advanced Triggering Options
• Combinatorial Logic Output
© 2017-2020 Microchip Technology Inc. Functional Reference Manuals (FRM) DS70005320D-page 1

• PWM Event Outputs
HRPWM with Fine Edge Placement
© 2017-2020 Microchip Technology Inc. Functional Reference Manuals (FRM) DS70005320D-page 2

Table of Contents
Introduction.....................................................................................................................................................1
High-Level Features....................................................................................................................................... 1
1. Registers................................................................................................................................................. 5
2. Register Maps......................................................................................................................................... 6
2.1. Common Functions Register Map................................................................................................7
2.2. PWM Generator Register Map................................................................................................... 21
3. Architecture Overview...........................................................................................................................51
4. Operation.............................................................................................................................................. 54
4.1. PWM Clocking............................................................................................................................54
4.2. PWM Generator (PG) Features..................................................................................................59
4.3. Common Features......................................................................................................................95
4.4. Lock and Write Restrictions......................................................................................................100
5. Application Examples..........................................................................................................................105
5.1. Six-Step Commutation of Three-Phase BLDC Motor...............................................................105
5.2. Three-Phase Sinusoidal Control of PMSM/ACIM Motors.........................................................114
5.3. Simple Complementary PWM Output.......................................................................................117
5.4. Cycle-by-Cycle Current Limit Mode..........................................................................................118
5.5. External Period Reset Mode.................................................................................................... 120
6. Interrupts............................................................................................................................................. 123
7. Operation in Power-Saving Modes..................................................................................................... 124
7.1. Operation in Sleep Mode..........................................................................................................124
7.2. Operation in Idle Mode............................................................................................................. 124
8. Related Application Notes...................................................................................................................125
9. Revision History.................................................................................................................................. 126
9.1. Revision A (August 2017).........................................................................................................126
9.2. Revision B (February 2018)..................................................................................................... 126
9.3. Revision C (February 2019)..................................................................................................... 126
9.4. Revision D (December 2020)................................................................................................... 126
The Microchip Website...............................................................................................................................128
Product Change Notification Service..........................................................................................................128
Customer Support...................................................................................................................................... 128
Microchip Devices Code Protection Feature..............................................................................................128
Legal Notice............................................................................................................................................... 129
Trademarks................................................................................................................................................ 129
Quality Management System..................................................................................................................... 130
HRPWM with Fine Edge Placement
© 2017-2020 Microchip Technology Inc. Functional Reference Manuals (FRM) DS70005320D-page 3
Product specificaties
Merk: | Microchip |
Categorie: | Niet gecategoriseerd |
Model: | dsPIC33CK256MP505 |
Heb je hulp nodig?
Als je hulp nodig hebt met Microchip dsPIC33CK256MP505 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Microchip
14 Mei 2025
6 Mei 2025
6 Mei 2025
6 Mei 2025
6 Mei 2025
6 Mei 2025
6 Mei 2025
6 Mei 2025
6 Mei 2025
6 Mei 2025
Handleiding Niet gecategoriseerd
- Simplicity
- Avidsen
- Spypoint
- Pfaff
- Violectric
- San Jamar
- Warwick
- ZWO
- Livn
- DEHN
- Ecm
- Enhance
- Ninebot
- Nexxt
- Audeze
Nieuwste handleidingen voor Niet gecategoriseerd
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025