Microchip CEC1736 Handleiding

Bekijk gratis de handleiding van Microchip CEC1736 (26 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 11 mensen en kreeg gemiddeld 4.3 sterren uit 4 reviews. Heb je een vraag over Microchip CEC1736 of wil je andere gebruikers van dit product iets vragen? Stel een vraag



2022 Microchip Technology Inc. and its subsidiaries

MCHP CONFIDENTIAL - NDA Required

DS00004691A-page 1

1.0INTRODUCTION

Soteria-G3 is a firmware design executed on the CEC173x family of devices. It can be used in conjunction with any

application processor (AP) that boots out of an external SPI Flash device to extend the Root-of-Trust (RoT) and enforce

a secure boot process in the system.

Soteria-G3 uses the CEC173x immutable secure bootloader, implemented in ROM, as the system RoT. The CEC173x

secure bootloader loads, decrypts, and authenticates the embedded controller firmware from the external (or internal)

SPI Flash device. The validated Soteria-G3 that runs on the CEC173x is designed to subsequently authenticate the

application processor firmware (AP_FW) located in the same SPI Flash component and up to three additional SPI Flash

components.

Soteria-G3 prevents the system from booting unless the AP_FW stored in the external SPI Flash device is authentic

code signed by the original equipment manufacturer (OEM). It offers security features to authenticate the SPI Flash

image in the external SPI Flash device.

The validated AP_FW that runs on the application processor can utilize crypto resources in the CEC173x to authenticate

other code in the system, thereby extending the Chain-of-Trust (CoT) to ensure that all code running in the system is

authorized.

Soteria-G3 also supports secure firmware updates, which can authenticate updates to both AP_FW and Soteria-G3 in

the system.

This application note provides details on how to use MPLAB

®

Code Configurator (MCC) with the CEC173x part and use

Soteria-G3 secure-boot solution.

This document is limited to providing the user with a high-level overview of MCC, Soteria-G3, and getting started with

using Soteria-G3 in CEC173x part.

1.1Sections

This document includes the following topics:

Section 2.0, "Setting Up an MCC Project with Soteria-G3 Library"

Section 3.0, "Soteria-G3 Sample Library Project"

Section 4.0, "Soteria-G3 Library Project Structure"

Section 5.0, "Soteria-G3 Library APIs"

Section 6.0, "Soteria-G3 User Interaction and Feedback"

Section 7.0, "Application Tasks for Debugging"

1.2References

Consult the following references for details on the specific parts referred to in this document:

•MPLAB

®

Code Configurator (MCC) Getting Started: https://microchipdeveloper.com/mcc:start

AN4691

Getting Started with MCC and Soteria-G3

Author:Shreyas Kannan

Microchip Technology Inc.

Product specificaties