Microchip ATSAMD20E16 Handleiding

Bekijk gratis de handleiding van Microchip ATSAMD20E16 (114 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 32 mensen en kreeg gemiddeld 5.0 sterren uit 7 reviews. Heb je een vraag over Microchip ATSAMD20E16 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Atmel-42230G-SAM-Atmel-SAMD-QTouch-Safety-Library-UserGuide_07/2016

Description

Atmel®QTouch® Peripheral Touch Controller (PTC) offers built-in hardware for

buttons, sliders, and wheels. PTC supports both mutual and self capacitance

measurement without the need for any external component. It offers superb

sensitivity and noise tolerance, as well as self-calibration and minimizes the

sensitivity tuning effort by the user.

The PTC is intended for acquiring capacitive touch sensor signals. The external

capacitive touch sensor is typically formed on a PCB, and the sensor electrodes

are connected to the analog charge integrator of the PTC using the device I/O

pins. The PTC supports mutual capacitance sensors organized as capacitive

touch matrices in different X-Y configurations, including Indium Tin Oxide (ITO)

sensor grids. In mutual capacitance mode, the PTC requires one pin per X line

(drive line) and one pin per Y line (sense line). In self capacitance mode, the PTC

requires only one pin with a Y-line driver for each self-capacitance sensor.

The PTC supports two sets of libraries, the QTouch Library and the QTouch

Safety Library. The QTouch Library supports both mutual and self capacitance

methods. The QTouch Safety Library is available for both GCC and IAR. The

QTouch Safety Library also supports both the mutual capacitance method and self

capacitance method along with the additional safety features.

Atmel QTouch Safety Library

Peripheral Touch Controller

USER GUIDE

Product specificaties