Micro Matic EBC300 Handleiding

Bekijk gratis de handleiding van Micro Matic EBC300 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.0 sterren uit 6 reviews. Heb je een vraag over Micro Matic EBC300 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

0237-MM-M-0623

RULES FOR SAFE OPERATION

Safety precautions are essential when any electrical or mechanical equipment is involved. These

precautions are neces sary when using, storing, and servicing electromechanical equipment.

Using this equipment with the respect and cau tion demanded will considerably lessen the

possibilities of personal injury. If safety precautions are overlooked or ig nored, personal injury or

property damage may occur.

This unit was designed for specic applications. It should not be modied and / or used for any

application other than those for which it was designed. If there are any questions regarding its

application or technical assistance call 1-866-327-4159.

Read this manual carefully - know your equipment. Consider the application, limitations and the

po tential hazards specic to your unit.

1. Only use a three wire extension cord, with grounded prong. Use a portable plug GFCI

device, a 3-prong power cord with a GFCI device or a GFCI equipped outlet to protect

from ground fault shock.

2. Do not touch pug or outlet with wet hands.

3. Avoid accidental starts. Turn switch “off” before connecting or disconnecting cord at

electrical outlets.

4. Water spray must never be directed toward any electrical wiring or directly toward the

machine itself or fatal electric shock may occur.

5. Never carry unit by the cord or hoses. Do not pull on cord to disconnect from outlet.

6. To prevent damage, the cord should not be crushed, placed next to sharp objects or

near heat.

7. Check power cords before using. Damaged cords can reduce performance or cause a

fatal electric shock.

8. Never allow children to operate this equipment.

9. Wear safety glasses and/ or goggles while operating.

10. Disconnect power plug form the outlet when not in use and prior to the detaching of

the cleaning hose.

11. Prior to starting in cold weather, be sure ice has not formed in any part of the

equipment.

12. To allow free air circulation, the unit should not be covered during operation.

Line Cleaning Machine

EBC300

Product specificaties