Micro Connect MC-HM-MT404L Handleiding

Micro Connect Schakelaar MC-HM-MT404L

Lees hieronder de 📖 handleiding in het Nederlandse voor Micro Connect MC-HM-MT404L (4 pagina's) in de categorie Schakelaar. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

INTRODUCTION:

FEATURES:

HDMI 2.0 4X4 Matrix Switcher 4:4:4

This 4x4 4K UHD Matrix provides a high level of audio and video performance with

support for resolutions up to 4K@60Hz (YUV 4:4:4, 8-bit) and pass-through support of

digital audio formats including LPCM 7.1 (with sampling rates up to 192kHz), bitstream,

and HD bitstream. The 4 HDMI inputs and 4 HDMI outputs support fully matrixed

switching. A sophisticated WebGUI interface supports storing and recalling up to four

routing presets, making remote control and configuration of the unit a breeze.

Before attempting to use this unit, please check the packaging and make sure the

following items are contained in the shipping carton:

1) Main unit.

2) 12 V/2A DC Power Supply.

3) Remote Control.

4) User’s Manual.

● HDMI inputs and outputs with 18Gbps (600MHz) 4K UHD support

● DVI 1.0 compliant with the use of an HDMI-DVI adaptor

● HDCP 1.4 and 2.2 compliant

● HDR 4:2:2 12 Bit Support

● Supports HD resolutions up to 3840x2160@60 Hz (YUV 4:4:4, 8-bit) &

4096x2160@60 Hz (YUV 4:4:4, 8-bit)

● Supports 48-bit Deep Color up to 1080p60

● Supports 3D signal bypass

● Supports pass-through of LPCM 7.1, bitstream and HD bitstream audio formats over

HDMI

● Supports storing and recall of up to four routing presets

● Controllable via front-panel buttons, RS-232, telnet, WebGUI, and IR remote

CONNECTION DIAGRAM:

OPERATION CONTROLS AND FUNCTIONS:

SPECIFICATIONS:

Note: Specifications are subject to change without notice.

PACKAGE CONTENTS:

Quick Installation Guide

Ver. 1.0

All brand names and trademarks are properties of

their respective owners

REMOTE CONTROL:

①Remote control sensor

②Input Select/Indicators (A):

Press the “HDMI OUT A” button repeatedly to switch to your desired source, and the LED

will illuminate to indicate which input source is being selected, and routed to HDMI A

display.

③ Input Select/Indicators (B):

Press the “HDMI OUT B” button repeatedly to switch to your desired source, and the LED

will illuminate to indicate which input source is being selected, and routed to HDMI B

display.

④ Input Select/Indicators (C):

Press the “HDMI OUT C” button repeatedly to switch to your desired source, and the LED

will illuminate to indicate which input source is being selected, and routed to HDMI C

display.

⑤ Input Select/Indicators (D):

Press the “HDMI OUT D” button repeatedly to switch to your desired source, and the LED

will illuminate to indicate which input source is being selected, and routed to HDMI D

display.

⑥ Power Switch & LED Indicator:

The LED will illuminate when the power is turned on.

ON/OFF

Power

1 2 3 4

Output A

Select

1 2 3 4

Output B

Select

1 2 3 4

Output C

Select

1 2 3 4

Output D

Select

① ② ③ ④ ⑤ ⑥

Output D Output C Output B Output AInput4 Input3 Input2 Input1 RS232 Ethernet

12 V/DC, 2 A

① Power:

Plug the 12V/2A DC power supply adapter into the unit and connect the adaptor to AC

wall outlet.

② HDMI inputs 1~4:

Connect to the HDMI output of your source equipment such as DVD player or set-top-

box.

③ HDMI outputs A~D:

Connect each of these output ports to the HDMI input of an HDMI display.

④ RS232 Communication Port:

Connect to a PC or Laptop via RS232 terminal to D-Sub 9-pin cable for the

transmission of RS-232 commands.

⑤ Ethernet:

Connect to an internet or network activate device.

④③① ② ⑤

HDMI version

HDCP version

Video Bandwidth

HDMI resolution

supported

HDMI connector

Operation temperaure

Relative humidity

HDMI 2.0

HDCP 2.2

18G

1920*1080@60Hz

1920*1080 3D@24Hz

1080P@120Hz

4K2K@30Hz

4K2K@60Hz(4:2:0)

4K2K@50/60Hz(4:4:4)

Type A ,19 pin, Female

0 50℃～ ℃

0 95%(no condensation)～

① Power:

Press the button to turn on/off the unit.

② Input Select for HDMI OUT A:

Press 1, 2, 3 or 4 to select the desired input source for

HDMI OUT A.

③ Input Select for HDMI OUT B:

Press 1, 2, 3 or 4 to select the desired input source for

HDMI OUT B.

④ Input Select for HDMI OUT C:

Press 1, 2, 3 or 4 to select the desired input source for

HDMI OUT C.

Blu-Ray DVD Player PS4

HD DVD STB

HD TV HD TV HD TVHD TV

Output D Output C Output B Output AInput4 Input3 Input2 Input1 RS232 Ethernet

12 V/DC, 2 A

RS232 Equipped

PC or Notebook

Routor

1.Use an Ethernet cable to connect the LAN port on the switch to an unused, active port

on the router.

2.Open “HDMI2.0 Matrix.exe”

3.select the “IP Host” and enter the IP address click “Start” button into PC Software

Control Interface

Note: see Web GUI Control below for how to get the IP address

At EDID Management interface, you can load default EDID to any input port, You can

also learn EDID from any output port to any input port

At the Route Setting interface, you can set any input port to any output port one by one,

or anyone input port to all output port.

PC Software Control

Connect by RS232

1. Connect PC to device by USB to RS232 tool

2. Open “HDMI2.0 Matrix.exe”

3. select the “comm” and click “Start” button into PC Software Control Interfac

Connect by LAN

PC Software Control Interface: Route Setting PC Software Control Interface: EDID Management

9 10

11 12

At System Information you can Upgrade the Firmware of Matrix Switch

NOTE: The Firmware File need to be supplied by the manufacturer

Use the step to quickly and immediately set User name and Password

Default User name : admin

Default Password : 123456

Set IP settings such as:

• Enable DHCP

• HostIP

• Net Mask

• Gateway

NOTE: Default IP setting is “Enable DHCP”

1.Use an Ethernet cable to connect the LAN port on the switch to an unused, active port

on the router.

2.Get the IP Address by CMD.exe

Enter ”ping matrix” into CMD windows as following picture shows

PC Software Control Interface: IP Setting PC Software Control Interface: System Information

Web GUI Control

3.Enter the IP Address into any web browser as following picture shows

4.Enter User name and Password to gogin the Web GUI

Default User name: admin default Password:123456

Web GUI Interface: Regist User name and Password

Product specificaties

Merk:	Micro Connect
Categorie:	Schakelaar
Model:	MC-HM-MT404L
Ingebouwd display:	Nee
Gewicht:	990 g
Gewicht verpakking:	1082 g
Breedte verpakking:	289 mm
Diepte verpakking:	216 mm
Hoogte verpakking:	56 mm
Gebruikershandleiding:	Ja
LED-indicatoren:	Ja
Inclusief AC-adapter:	Ja
Kleur behuizing:	Zwart
Aantal Ethernet LAN (RJ-45)-poorten:	1
HDCP:	Ja
Aansluiting voor netstroomadapter:	Ja
HDMI versie:	2.0
Aantal HDMI-invoerpoorten:	8
Output current:	2000 mA
Spanning:	12 V
HDCP versie:	2.2
Bandbreedte:	18 Gbit/s
Aantal HDMI-uitvoerpoorten:	1
Afstandsbediening inbegrepen:	Ja
Bedrijfstemperatuur (T-T):	0 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 95 procent
Type product:	AV-matrixschakelaar