Metra AX-MITSUCAM-6V Handleiding

Metra Niet gecategoriseerd AX-MITSUCAM-6V

Lees hieronder de 📖 handleiding in het Nederlandse voor Metra AX-MITSUCAM-6V (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
© COPYRIGHT 2016 METRA ELECTRONICS CORPORATION
axxessinterfaces.com • metraonline.com axxessinterfaces.com • metraonline.com
Axxess Integrate
®Axxess Integrate
®
Installation Instructions for AX-MITSUCAM-6V
REV. 9/27/16
Installation Instructions for AX-MITSUCAM-6V
© COPYRIGHT 2016 METRA ELECTRONICS CORPORATION REV. 9/27/16
INTERFACE FEATURES
• Retains the factory backup camera to an aftermarket radio
• Allows an aftermarket camera to be added to the factory screen
• Includes the AX-CAM6V 12-volt to 6-volt converter
INTERFACE COMPONENTS
• AX-MITSUCAM-6V harness • AX-CAM6V 12-volt to 6-volt converter
AX-MITSUCAM-6V
Mitsubishi Backup Camera Retain/Add-On
2014-up
MITSUBISHI
Lancer 2014-up
Lancer Sportback 2014-up
Outlander 2014-up
Outlander Sport 2014-up
• Wire cutter • Crimping tool • Solder gun • Tape
• Connectors (example: butt connectors, bell caps, etc.)
APPLICATIONS
TOOLS REQUIRED
K PNOWLEDGE IS OWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recommends MECP
certified technicians
Connections to be made
The AX-MITSUCAM-6V can be connected two different ways
To retain the factory backup camera to an aftermarket radio:
• Connect the Black wire to chassis ground, and also to the wire of the AX-CAM6V.Black
• Connect the Yellow wire to battery power.
•
Connect the wire to the wire of the AX-CAM6V.Red Blue/Red
• Connect the Green/Purple wire to the reverse wire of the aftermarket radio,
and also to the wire of the AX-CAM6V. Blue/White
• Connect the male Yellow RCA jack to the rear camera input of the aftermarket radio.
To allow an aftermarket camera to be added to the OEM screen:
• Connect the Black wire to the ground wire of the aftermarket camera.
• Connect the Yellow wire to battery wire of the aftermarket camera.
• Connect the female Yellow RCA jack to the aftermarket camera.
• The AX-CAM6V 12-volt to 6-volt converter will not be used in this application.
CAUTION!
All accessories, switches, climate controls panels, and especially air bag indicator lights
must be connected before cycling the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.


Product specificaties

Merk: Metra
Categorie: Niet gecategoriseerd
Model: AX-MITSUCAM-6V

Heb je hulp nodig?

Als je hulp nodig hebt met Metra AX-MITSUCAM-6V stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Metra

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd