Metra AX-HYKIACAM1-6V Handleiding

Metra Niet gecategoriseerd AX-HYKIACAM1-6V

Lees hieronder de 📖 handleiding in het Nederlandse voor Metra AX-HYKIACAM1-6V (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 12 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
© COPYRIGHT 2017 METRA ELECTRONICS CORPORATION
axxessinterfaces.com • metraonline.com axxessinterfaces.com • metraonline.com
Axxess Integrate
®Axxess Integrate
®
REV. 4/14/17© COPYRIGHT 2017 METRA ELECTRONICS CORPORATION REV. 4/14/17
Installation Instructions for AX-HYKIACAM1-6V
Instrucciones de instalación para AX-HYKIACAM1-6V
INTERFACE FEATURES
• Retains the factory back-up camera to an aftermarket radio
• Allows an aftermarket camera to be added to the factory screen
• Includes the AX-CAM6V 12-volt to 6-volt converter
INTERFACE COMPONENTS
• AX-HYKIACAM1-6V harness • AX-CAM6V 12-volt to 6-volt converter
AX-HYKIACAM1-6V
Hyundai / Kia (with NAV)
2014-2017
HYUNDAI
Elantra 2017
Elantra GT 2016-2017
Genesis Sedan 2016
Santa Fe 2017
Santa Fe Sport 2017
Sonata 2015-2017
HYUNDAI (CONT)
Tucson 2016-2017
Veloster 2016-2017
KIA
Cadenza 2017
Forte 2017
Niro 2017
KIA (CONT)
Optima 2016-2017
Sedona 2015-2017
Sorento 2016-2017
Soul 2014-2017
Sportage 2017
• Wire cutter • Crimping tool • Solder gun • Tape
• Connectors (example: butt connectors, bell caps, etc.)
APPLICATIONS
TOOLS REQUIRED
CAUTION!
All accessories, switches, climate controls panels, and especially air bag indicator lights
must be connected before cycling the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
K PNOWLEDGE IS OWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recommends MECP
certified technicians
Connections to be made
The AX-HYKIACAM1-6V can be connected two different ways
To retain the factory back-up camera to an aftermarket radio:
• Connect the Black wire to chassis ground, and also to the wire of the AX-CAM6V.Black
• Connect the Red Blue/Red wire to the wire of the AX-CAM6V.
• Connect the reverse wire of the aftermarket radio, and the wire of the Blue/White
AX-CAM6V, to a reverse wire.
• Connect the male Yellow RCA jack to the rear camera input of the aftermarket radio.
To allow an aftermarket camera to be added to the OEM screen:
• Connect the Black wire to the aftermarket cameras ground wire.
• Connect the power wire of the aftermarket camera to accessory power.
• Connect the female Yellow RCA jack to the aftermarket camera.
• Tape off and disregard the following (1) wire, it will not be used in this application: Red.
• Disregard the AX-CAM6V, it will not be used in this application.
Note: Disregard the loose wire, it will not be used in this application.Green/Purple


Product specificaties

Merk: Metra
Categorie: Niet gecategoriseerd
Model: AX-HYKIACAM1-6V

Heb je hulp nodig?

Als je hulp nodig hebt met Metra AX-HYKIACAM1-6V stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Metra

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd