Metra 99-9303 Handleiding


Bekijk gratis de handleiding van Metra 99-9303 (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.7 sterren uit 1.5 reviews. Heb je een vraag over Metra 99-9303 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/4
INSTALLATION INSTRUCTIONS FOR PART 99-9303
Small Flat Blade Screwdriver Phillips Screwdriver
1-800-221-0932 www.metraonline.com
KIT FEATURES
REV. 04-17-09 © COPYRIGHT 2004-2009 METRA ELECTRONICS CORPORATION
BMW Z4
2003-2008
DIN Head Unit Provision
A) Radio Housing
TOOLS REQUIRED:
99-9303
A
T
ABLE OF CONTENTS
Dash Disassembly: pg. 1
Kit Assembly: pg. 2
Final Assembly: pg. 3
WIRING AND ANTENNA CONNECTIONS
(Sold Separately)
40-EU10 - European antenna adapter
70-9003 - European harness
APPLICATIONS
99-9303
DASH DISASSEMBLY
Disconnect the negative battery
terminal to prevent an accidental
short circuit.
NOTE: Make sure the vent on/o dials
are in the middle position.
1
Using a small at blade screwdriver,
release the metal clip located inside
the vents facing upward on the left
and right side while pulling the vents
outward from the dash.
(Figure A)
2
A
BMW Z4 2003-2008
B
Remove (2) Phillips screws exposed
at top of radio and remove.
(Figure B)
3
1
99-9303
2
KIT ASSEMBLY
DIN HEAD UNIT PROVISION
1
Screw the 99-9303 housing into the
dash opening instead of the factory
radio.
(Figure B)
2
Slide the DIN cage into the space in
the 99-9303 and secure by bending
the metal locking tabs outward.
(Figure C)
3
Slide the after et head unit intomark
the DIN cage until secure.
(Figure D)
B
C
D
A
NOTE:
The bottom bar connecting the two sides
of the 99-9303 will need to be cut and
removed prior to Kit Assembly.
(Figure A)


Product specificaties

Merk: Metra
Categorie: Niet gecategoriseerd
Model: 99-9303

Heb je hulp nodig?

Als je hulp nodig hebt met Metra 99-9303 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden