Metra 99-9109B Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Metra 99-9109B (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 9 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
METRA - The World’s best kits ®metraonline.com
REV. 3/9/2017 INST99-9109B
Installation instructions for part 99-9109B
®
CAUTION!
All accessories, switches, climate controls panels, and
especially air bag indicator lights must be connected before cycling
the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
© COPYRIGHT 2017 METRA ELECTRONICS CORPORATION
ISO DIN radio provision with pocket
ISO DDIN radio provision
A) Radio trim panel B) Radio brackets • C) Pocket • D) (4) #8 x 3/8” Phillips screws E) (4) Panel clips
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: XSVI-9004-NAV
Antenna Adapter: 40-EU56 • 40VW54 (06’-07’ Standard Symphony models)
Steering wheel control interface: ASWC-1 (sold separately)
Qty. (2) 86-9001 Radio removal tools
Panel removal tool
TOOLS REQUIRED
Audi A3 (with NAV or Symphony radio) 2006-2013
99-9109B
A C D EB
Dash Disassembly ..................................................2
Kit Assembly
ISO DIN radio provision with pocket ...................... 3
ISO DDIN radio provision ...................................... 3
Table of Contents
99-9109B
®
2
1. Slowly insert the the 86-9001
radio removal tools into the radio
using the tip shown. (Figure A)
2. When you feel each tool click,
remove and unplug the radio. A
panel removal may be needed to
assist in the vremoval.
3. Remove the (2) Phillips screws
to the left and right of the radio
opening now exposed. These
screws will be reused in Kit
Assembly. (Figure B)
Dash Disassembly
AS
CD
TAPE
SAT
SCAN
RDS
TO NE
MENU
LOAD
AM
FM
(Figure A) (Figure B)
99-9109B
®
ISO DIN radio provision with pocket
1. Attach the pocket radio to the
brackets using the (4) #8 x 3/8”
Phillips screws provided. (Figure A)
2. Remove the metal DIN sleeve and
trim ring from the aftermarket radio.
3. Slide the radio into the bracket/
pocket assembly, and then secure it
using the screws supplied with the
radio. (Figure B)
4. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections
to the radio. Metra recommends
using the proper mating adapter from
Metra and/or Axxess. Test the radio
for proper operation.
5. Insert the completed assembly into
the dash, and then secure using the
factory screws removed in Dash
Disassembly. (Figure C)
6. Attach the panel clips radio onto the
trim panel, and then clip the panel
onto the completed assembly to
secure it to the dash.
ISO DDIN radio provision
1. Attach the radio brackets to the
radio using the screws supplied
with the radio. (Figure A)
2. Locate the factory wiring harness
and antenna connector in the
dash and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra and/
or Axxess. Test the radio for proper
operation.
3. Insert the completed assembly into
the dash, and then secure using
the factory screws removed in
Dash Disassembly. (Figure B)
4. Attach the panel clips onto the
radio trim panel, and then clip the
panel onto the completed assembly
to secure it to the dash.
Kit Assembly
3
(Figure A)
(Figure B)
(Figure A)
(Figure B)
(Figure C)


Product specificaties

Merk: Metra
Categorie: Niet gecategoriseerd
Model: 99-9109B

Heb je hulp nodig?

Als je hulp nodig hebt met Metra 99-9109B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Metra

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd