Metra 99-8721B Handleiding

Metra Carkit 99-8721B

Lees hieronder de 📖 handleiding in het Nederlandse voor Metra 99-8721B (8 pagina's) in de categorie Carkit. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
INSTALLATION INSTRUCTIONS FOR PART 99-8721B
APPLICATIONS
METRA. The World’s best kits.metraonline.com1-800-221-0932 © COPYRIGHT 2013 METRA ELECTRONICS CORPORATION
REV. 2/9/2015 INST99-8721B
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
Table of Contents
• ISO DIN radio provision with pocket
Painted matte black
A) Radio Housing Trim Panel • B) Brackets • C) Pocket D) (8) #8 x 3/8” Phillips Screws
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • XSVI-9005-NAV
Antenna Adapter: • 40-EU10
• Panel removal toolPhillips screwdriver • Socket Wrench • Torx driver
TOOLS REQUIRED
A B C D
Dash Disassembly
Mercedes-Benz C-Class 2005-2007 .................2-3
Kit Assembly
ISO DIN radio provision......................................... 3
99-8721B
1. Unclip and remove cover around
shift lever and cup holder.
(Figure A)
2. Unclip and remove ashtray
assembly. (Figure B)
3. Remove (2) Torx screws from the
bottom of the climate control unit
then remove the unit. (Figure C)
Dash Disassembly
AUTO A/C
FR
ONT R EAR
72
64 80
F
80
72
64
4
5
6
F
AUTO A/C
FR
ON
TREAR
72
64 80
F
80
72
64
3
2
4
5
6
F
AUTO A/C
FRO
NT REAR
72
64
80
F
80
72
64
3
2
4
5
6
F
(Figure A)
(Figure D)
(Figure B)
(Figure C)
4. Inside each vent, using a small
flat screwdriver push the lower
tab inward toward the center of
the vent and then rotate each vent
up to expose (1) Torx head screw.
Loosen the Torx screws (It is not
necessary to remove the screws.) Push
the upper clip inward and rotate the
vent downward to expose (1) spring
clip in the top of the vent assembly.
(Figure D)
Continued on next page
99-8721B
ES P
OFF
AUT O
A
FRONT
72
64
80
F
80
72
64
3
2
4
5
6
F
(Figure E) (Figure A)
(Figure F) (Figure B)
(Figure G) (Figure C)
Kit AssemblyDash Disassembly
ISO DIN radio provision with pocket
1. Mount the pocket to the radio
brackets with the (4) #8 x 3/8”
Phillips screws supplied.
(Figure A)
2. Mount the bracket/pocket assembly
to the radio housing trim panel with
the included #8 screws.
(Figure B)
3. Slide the radio into radio brackets
and secure with screws supplied
with the unit.
(Figure C)
4. Locate the factory wiring harness
and antenna plug in the dash. Metra
recommends using the proper mating
adapters from Metra and/or AXXESS.
5. Mount the new radio assembly into
the dash and reassemble dash in
reverse order of disassembly.
5. Unclip and remove the vent
assembly. (Figure E)
6. Unclip and remove the push button
panel above the radio (Figure F)
7. Remove (4) Torx screws securing
factory radio then remove the unit.
(Figure G)
8. Remove the two metal clips on the
bottom of the factory radio and
place them on the bottom tabs of
the radio housing trim panel.
Continue to kit assembly


Product specificaties

Merk: Metra
Categorie: Carkit
Model: 99-8721B

Heb je hulp nodig?

Als je hulp nodig hebt met Metra 99-8721B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Carkit Metra

Handleiding Carkit

Nieuwste handleidingen voor Carkit