Metra 99-8248B Handleiding
Bekijk gratis de handleiding van Metra 99-8248B (8 pagina’s), behorend tot de categorie Carkit. Deze gids werd als nuttig beoordeeld door 27 mensen en kreeg gemiddeld 4.5 sterren uit 14 reviews. Heb je een vraag over Metra 99-8248B of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/8
METRA. The World’s best kits.™metraonline.com1-800-221-0932 © COPYRIGHT 2004-2014 METRA ELECTRONICS CORPORATION
REV. 12/9/2014 INST99-8248B
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
Installation instructions for part 99-8248B
• ISO DIN radio provision with pocket
• Painted black
• A) Radio housing trim panel • B) Brackets • C) Pocket • D) (4) #8 x 3/8” screws • E) (2) Panel clips
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-1761 or TYTO-02
Antenna Adapter: • Not required
• Panel removal tool • Phillips screwdriver
TOOLS REQUIRED
A B C D
E
Dash Disassembly
– Toyota Highlander 2014-up .................................. 2
Kit Assembly
– ISO DIN radio provision with pocket ...................... 3
Table of Contents
99-8248B
1. Unsnap and remove climate
control and the long trim panel
with it. (Figure A)
2. Unsnap the thin trim panel from
the top and right side of the radio.
(Figure B)
3. Unsnap and remove the climate
vents from either side of the radio.
(Figure C)
4. Remove four 10 mm bolts to
remove the factory radio.
(Figure D)
Continue to Kit Assembly
Dash Disassembly
(Figure C)(Figure A)
(Figure D)(Figure B)
99-8248B
Kit Assembly
(Figure B)(Figure A)
ISO DIN radio provision with pocket
1. Attach the (2) panel clips to the
radio housing.
Note: The factory panel clips
may be used if preferred.
2. Mount the pocket to the bracket/
panel assembly with the
(4) #8 x 3/8” Phillips screws
supplied. (Figure A)
3. Slide the radio into the assembly
and secure with screws supplied
with the radio. (Figure B)
4. Locate the factory wiring
harness in the dash. Metra
recommends using the proper
mating adapter from Metra or
AXXESS. All accessories, switches,
and especially air bag indicator
lights must be plugged in before
reconnecting the battery or cycling
the ignition. Test everything for
proper operation.
5. Mount the radio/bracket assembly
into the dash opening.
6. Snap the radio trim panel over the
new radio and reassemble dash in
reverse order of disassembly.
Product specificaties
| Merk: | Metra |
| Categorie: | Carkit |
| Model: | 99-8248B |
Heb je hulp nodig?
Als je hulp nodig hebt met Metra 99-8248B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Carkit Metra
3 Juni 2025
3 Juni 2025
7 Mei 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
31 Maart 2025
17 November 2024
17 November 2024
Handleiding Carkit
- Avantalk
- Gembird
- Lenco
- BeeWi
- SuperTooth
- T'nB
- SiriusXM
- Nite Ize
- Perfect Choice
- Pyle
- Kensington
- WAGAN
- Veho
- Motorola
- I-Tec
Nieuwste handleidingen voor Carkit
3 Juni 2025
2 Juni 2025
19 Mei 2025
27 April 2025
31 Maart 2025
30 November 2024
17 November 2024
15 November 2024
30 Juli 2024
30 Juli 2024