Metra 99-7385B Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Metra 99-7385B (12 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 6 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
Metra. The World’s Best Kits.®MetraOnline.com © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 4/16/19 INST99-7385B
I N S TA L L AT I O N I N S T R U C T I O N S
99-7385B
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
KIT FEATURES
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Climate displayD) Pocket • E) (12) #8 x 3/8” Phillips screws • F) Wiring harness (not shown)
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver • Wire
cutter • Crimp tool • Solder gun • Tape • Connec-
tors (example: butt-connectors, bell caps, etc.)
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly
–ISO DIN radio provision with pocket ..................3
–ISO DDIN radio provision .....................................3
Wiring Instructions ............................................4-5
Installation .............................................................5
Final Assembly .......................................................6
(ASWC-1) steering wheel control settings .......6-10
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness: Included with kit
Antenna Adapter: Included with kit
Steering wheel control interface: ASWC-1 Included with kit
12v to 6v camera stepdown: AX-CAM6V included with kit
A B C D E
Hyundai Santa Fe
(without NAV)
2017-2018/
Santa Fe Sport
(without NAV, with display radio†)
2017-2018
ISO DIN radio provision with pocket
ISO DDIN radio provision
Includes climate display and ASWC-1
Retains audio controls on the
steering wheel
Retains the factory backup camera
Provides NAV outputs (speed sense)
Includes an AX-CAM6V 12 TO 6V
stepdown
Painted matte black
† Display radio is an Android Auto / Apple CarPlay radio
1.800.221.0932
|
MetraOnline.com
2
1. Unclip and remove the center a/c vents.
(Figure A)
2. Remove (4) Phillips screws securing the
radio. Slide the radio out, then unplug
and remove the radio. (Figure B)
Continue to Kit Assembly
DASH DISASSEMBLY
(Figure A) (Figure B)
REV. 4/16/2019 INST99-7385B 3
KIT ASSEMBLY
(Figure A)
(Figure B)
(Figure C)
ISO DIN radio provision with pocket
1. Secure the
radio brackets
to the
pocket
using the (4) #8 x 3/8” Phillips screws
provided. (Figure A)
2. Secure the bracket/pocket assembly to
the
radio trim panel
using the
(4) #8 x 3/8” Phillips screws provided.
(Figure B)
3. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
4. Slide the radio into the bracket/panel/
pocket assembly, then secure it to the
assembly using the screws supplied
with the radio. (Figure C)
Continue to Wiring Instructions
(Figure B)
(Figure A)
ISO DDIN radio provision
1. Secure the
radio brackets
to the
radio
trim panel
using the (4) #8 x 3/8”
Phillips screws provided. (Figure A)
4. Slide the radio into the bracket/panel
assembly, then secure it to the assembly
using the screws supplied with the
radio. (Figure B)
Continue to Wiring Instructions


Product specificaties

Merk: Metra
Categorie: Niet gecategoriseerd
Model: 99-7385B

Heb je hulp nodig?

Als je hulp nodig hebt met Metra 99-7385B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Metra

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd