Metra 99-6544B Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Metra 99-6544B (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 96 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
Metra. The World’s Best Kits.MetraOnline.com © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION REV. 10/5/17 INST99-6544B
I N S TA L L A T I O N I N S T R U C T I O N S
99-6544B
KIT FEATURES
ISO DIN radio provision with pocket
Painted scratch resistant matte black
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (8) #8 x 3/8” Phillips screws TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• T-25 Torx driver • Cutting tool
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation ....................................................... 3
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness: Please visit metraonline.com for
additional adapters and accessories.
Antenna Adapter: 40-EU55
A B C D
Fiat 500 2016-up*
*Visit MetraOnline.com for up-to-date vehicle specific applications.
1.800.221.0932
|
MetraOnline.com
2
1. Unsnap and remove the climate control
cover panel. (Figure A)
2. Remove (2) T-25 Torx screws and unclip
and remove the painted dash panel.
(Figures B,C)
DASH DISASSEMBLY
(Figure A) (Figure D)
(Figure B) (Figure E)
(Figure C) (Figure F)
3. Remove (4) T-25 Torx from the radio trim
panel including vents and remove the
panel. (Figures D, E))
4. Remove (4) T-25 Torx to remove the
radio (Figure F)
Continue to Kit Preparation
REV. 10/5/2017 INST99-6544B 3
1. Cut and remove the shaded area from
the sub-dash to allow clearance for the
aftermarket radio. (Figure A)
Continue to Kit Assembly
(Figure A)
ISO-DIN radio provision with pocket
1. Attach the
radio brackets
to the
radio
trim panel
using (4) #8 x 3/8” Phillips
screws supplied. (Figure A)
2. Attach the
pocket
to the bracket
assembly using the (4) supplied
#8 x 3/8” Phillips screws. (Figure B)
3. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
4. Slide the radio into the completed
assembly, and then secure it to the
assembly using screws supplied
with the radio. (Figure C)
5. Locate the factory wiring harness and
antenna connector in the dash, and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra
and/or AXXESS. Test the radio for
proper operation.
6. Reassemble the dash in reverse order
of disassembly.
KIT PREPARATION KIT ASSEMBLY
(Figure A)
(Figure B)
(Figure C)
Remove
shaded area


Product specificaties

Merk: Metra
Categorie: Niet gecategoriseerd
Model: 99-6544B

Heb je hulp nodig?

Als je hulp nodig hebt met Metra 99-6544B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Metra

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd