Metra 99-6506 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Metra 99-6506 (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 12 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
INSTALLATION INSTRUCTIONS FOR PART 99-6506
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2004-2009 METRA ELECTRONICS CORPORATION
KIT FEATURES
• DIN Head unit provision with pocket
• ISO DIN Head unit provision with pocket
A) Radio Housing • B) ISO Brackets • C) Trim Plate
KIT COMPONENTS
TOOLS REQUIRED:
99-6506
A
APPLICATIONS
Chrysler Pacifica
2004-2008
C
B
Phillips Screwdriver • Small Flat Blade Screwdriver • Cutting Tool • T-15 Torx Driver
WIRING AND ANTENNA CONNECTIONS (Sold Separately)
Wire harnesses:
• CHTO-02 Chrysler/Dodge amplified interface 2002-up
• 70-6506 Chrysler/Dodge amplified bypass harness 2002-up
Antenna adapter:
• 40-CR10 - Chrysler/Dodge antenna adapter 2002-up
Dash Disassembly
Chrysler Pacifica 2004-2008 . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Kit Assembly
Din Head Unit Provision. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
ISO Din Head Unit Provision. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Final Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
TABLE OF CONTENTS
99-6506
K
NOWLEDGE IS
P
OWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
99-6506
1
Disconnect the negative battery
terminal to prevent an accidental
short circuit.
1
Loosen (1) T-15 Torx screw from the
front side of shift knob and pull up to
remove.
(Figure A)
NOTE:
For models equipped with no
release lever on shift knob just turn
counter-clockwise to remove.
2
CHRYSLER PACIFICA 2004-2008
Unsnap floor console trim around the
shifter. Unplug harness to console
trim and remove trim.
(Figure B)
3
Unsnap and remove ignition key
trimring.
4
Unsnap and remove the dash trim
panels from each side of the Radio/
Climate Controls.
(Figure C)
5
Remove (4) Phillips screws to
remove radio.
Note: When DIN mounting a radio a
piece of plastic in the dash cavity
may have to be removed for radio
depth clearance (
Figure D
).
6
DASH DISASSEMBLY
P
R
N
D
AUTOSTICK
A
P
R
N
D
AUTOSTICK
B
C
POWER
OUTLE T
POWER
OUTLE T
D


Product specificaties

Merk: Metra
Categorie: Niet gecategoriseerd
Model: 99-6506

Heb je hulp nodig?

Als je hulp nodig hebt met Metra 99-6506 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Metra

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd