Metra 99-5816 Handleiding

Bekijk gratis de handleiding van Metra 99-5816 (8 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 56 mensen en kreeg gemiddeld 4.6 sterren uit 9 reviews. Heb je een vraag over Metra 99-5816 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

METRA. The World’s best kits.™metraonline.com © COPYRIGHT 2004-2015 METRA ELECTRONICS CORPORATION

REV. 8/26/2015 INST99-5816

Installation instructions for part 99-5816

CAUTION!

Metra recommends disconnecting the negative bat

-

tery terminal before beginning any installation, unless the vehicle

manufacturer recommends against so. Please check with your local

Dealership for more information. All accessories, switches, climate

controls panels, and especially air bag indicator lights must be con-

nected before reconnecting the battery or cycling the ignition. Also,

do not remove the factory radio with the key in the on position, or the

vehicle running. It would be best to remove the key from the ignition

and then wait a few seconds before removing the factory radio.

• DIN radio provision with pocket

• ISO DIN radio provision with pocket

• ISO DDIN radio provision

• Painted to match factory dash

• A) Radio housing trim panel • B) ISO brackets • C) ISO trim plate • D) ISO DDIN brackets

• E) ISO DDIN trim plate • F) Pocket • G) (2) Top clips • H) (4) Middle radio housing clips

20;-,(;<9,:

20;*64765,5;:

>0905.(5;,55(*655,*;065: (sold separately)

Wiring Harness: • XSVI-5520-NAV • XSVI-5521-NAV • AX-ADBOX2 & AX-ADFD01

Antenna Adapter: • Not required

• Panel removal tool • Phillips screwdriver • Socket set • Cutting tool • T-20 Torx driver

;663:9,8<09,+

Ford Focus 2008-2011

99-5816 Dash Disassembly..............................................2-3

Kit Preparation.......................................................4

Kit Assembly

–DIN radio provision with pocket ............................5

– ISO DIN radio provision with pocket ......................6

– ISO DDIN radio provision ......................................7

Table of Contents

B CADF

G H

E

Product specificaties