Metra 99-5802 Handleiding
Pagina's 2 Engels Carkit
Bekijk de handleiding van Metra 99-5802 gratis online of download de PDF. 81 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag
1
FORD Expedition 1997-00 / F-150 1997-00
2
Cut and remove the Mounting Bracket
("A").Skip to the Installation Instructions for
ALL VEHICLES on Page #2.
1 2
Disconnect the negative battery terminal to
prevent an accidental short circuit. Place
your index fingers on the inner edges of the
a/c vents (shown above) and push inward.
Grasp the exposed lip of each vent opening
and pull out on the radio trim bezel. Remove
the dash trim bezel. (The airbag wiring does
NOT need to be disconnected). Using
Metra's 86-5618, pull the factory head unit
from the dash and disconnect the wiring.
Disconnect the negative battery terminal to
prevent an accidental short circuit. Using Metra's
86-5618, pull the factory head unit from the dash
and disconnect the wiring.
1
FORD Crown Victoria 1995-00 / Econoline 1997-00
Explorer 1995-00 / F-250 1999-00 / F-350 1999-00
F-550 1999-00 / Ranger 1995-00 / Windstar 1999-00
LINCOLN Continental 1995-97 / MAZDA B-Series Pickup 1995-00
MERCURY Grand Marquis 1995-00 / Mountaineer 1997-00
Cut and remove the Mounting Bracket
("A") and the bottom mounting legs
("B")from the Radio Housing. Skip to
the Installation Intructions for ALL
VEHICLES on Page #2.
2
3
4
ALL VEHICLES
"B"
CROWN VICTORIA, GRAND MARQUIS: Skip to step #5.
CONTINENTAL, ECONOLINE, F-150, MOUNTAINEER: Skip to step #4.
B-SERIES PICKUP, EXPEDITION, EXPLORER, F-150, F-250, F-350, F-550, RANGER,
WINDSTAR: Metra recommends installing the kit with the pocket at the However, to top.
install the kit with the pocket at the locate the slots on tabs bottom, "A".Using the slots as a
guide, cut and remove the portions of the tabs. shaded(see Fig. A)
B-SERIES PICKUP, CONTINENTAL,
ECONOLINE, EXPEDITION, EXPLORER,
F-150, F-250, F-350, F-550, MOUNTAINEER,
RANGER, WINDSTAR: Secure the Mounting
Bracketto the back of the with Radio Housing
(2) 3/8" Phillips Pan-head Screws supplied.
(see Fig. A). Slide the DIN cage into the Radio Housing and secure by bending the metal
locking tabs down. Slide the aftermarket head unit into the cage until secure. (see Fig. B).
Slide the onto the Mounting Bracket and mount the Support to the back of the Rear Support
head unit using the hardware included with the unit. (see Fig. C). Skip to step #6.
Fig. A
Fig. B
Fig. C
"A"
"A"
Fig. A
"A"
"A"
Product specificaties
| Merk: | Metra |
| Categorie: | Carkit |
| Model: | 99-5802 |
Heb je hulp nodig?
Als je hulp nodig hebt met Metra 99-5802 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Carkit Metra
Metra 99-6000 Handleiding Metra 99-9011 Handleiding Metra 99-5832G Handleiding Metra 99-7874 Handleiding Metra 99-3302 Handleiding Metra 99-8220CHG Handleiding Metra 99-7875 Handleiding Metra 99-7422 Handleiding
Alle Metra Carkit handleidingen