Metra 95-8912HG Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Metra 95-8912HG (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 12 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
The World’s best kits.®MetraOnline.com © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 4/1/20 INST95-8912HG
I N S TA L L AT I O N I N S T R U C T I O N S
95-8912HG
KIT FEATURES
• ISO DDIN radio provision
• Painted high gloss black to match the factory finish
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Panel clips (4)
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 10mm socket wrench
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness: 70-1761
Antenna Adapter: 40-LX11
Steering wheel control interface: ASWC-1
A B C
Subaru BRZ 2016-Up
Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com
specific applications
386.257.1187
|
MetraOnline.com
2
DASH DISASSEMBLY
1. Unclip and remove the radio trim panel.
(Figure A)
2. Remove (4) 10mm screws securing the
radio. Slide the radio out, then unplug
and remove. (Figure B)
Continue to Kit Assembly
(Figure A) (Figure B)
REV. 4/1/2020 INST95-8912HG 3
KIT ASSEMBLY
ISO DDIN radio provision
1. Attach the (4) provided to panel clips
the (Figure A)radio trim panel
2. Secure the radio brackets to the radio
using screws supplied with the radio.
(Figure B)
3.
Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to the
radio. Metra recommends using the proper
mating adapter from Metra and/or AXXESS.
Test the radio for proper operation
.
4. Slide the radio into the dash, then secure
using the factory screws. Clip the radio
trim panel over the completed assembly
to complete the installation.
(Figure A) (Figure B)


Product specificaties

Merk: Metra
Categorie: Niet gecategoriseerd
Model: 95-8912HG

Heb je hulp nodig?

Als je hulp nodig hebt met Metra 95-8912HG stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Metra

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd