Metra 95-7355B Handleiding

Metra Carkit 95-7355B

Lees hieronder de 📖 handleiding in het Nederlandse voor Metra 95-7355B (8 pagina's) in de categorie Carkit. Deze handleiding was nuttig voor 8 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
APPLICATIONS
METRA. The World’s best kits.metraonline.com1-800-221-0932 © COPYRIGHT 2013 METRA ELECTRONICS CORPORATION
REV. 11/7/2013 INST95-7355B
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
Table of Contents
INSTALLATION INSTRUCTIONS FOR PART 95-7355B
• Double DIN radio provision
Painted matte black
A) Radio Housing Trim Panel B) Brackets • C) (2) #6 x 3/8 screws
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-7304 harness/HYBL-04 premium sound and Bluelink interface
Antenna Adapter: • Not required
• Panel removal tool Phillips screwdriver • Socket wrench
TOOLS REQUIRED
(excluding factory NAV equipped vehicles)
A B C
Dash Disassembly
Kia Sorento 2014-up ............................................ 2
Kit Assembly
Double DIN radio provision ................................... 3
95-7355B
1. Using soft panel tools, unsnap
and remove the center dash panel
surrounding the radio, disconnecting
the necessary harnesses. (Figure A)
2. Remove two screws from the two
vents surrounding the factory radio and
remove them both. (Figure B, C)
3. Remove the four screws securing the
factory radio and remove it from the
dash. (Figure D)
Continue to kit assembly
Dash Disassembly
(Figure A)
(Figure B) (Figure D)
(Figure C)
95-7355B
Kit Assembly
Double DIN radio provision
1. Attach the brackets to the radio
housing trim panel using the (2)
#6 x 3/8” screws supplied.
(Figure A)
2. Slide the double DIN radio into the
bracket/radio housing trim panel
assembly and secure with the
screws supplied with the radio.
(Figure B)
3. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from Metra
and/or AXXESS.
4. Reassemble dash in reverse order
of disassembly.
(Figure A) (Figure B)


Product specificaties

Merk: Metra
Categorie: Carkit
Model: 95-7355B

Heb je hulp nodig?

Als je hulp nodig hebt met Metra 95-7355B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Carkit Metra

Handleiding Carkit

Nieuwste handleidingen voor Carkit