Metra 95-7345B Handleiding

Metra Carkit 95-7345B

Lees hieronder de 📖 handleiding in het Nederlandse voor Metra 95-7345B (8 pagina's) in de categorie Carkit. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
Metra. The World’s Best Kits.®MetraOnline.com © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 5/15/18 INST95-7345B
I N S TA L L AT I O N I N S T R U C T I O N S
95-7345B
KIT FEATURES
• ISO DDIN radio provision
• Painted matte black match factory dash
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) (3) #8 x 3/8” Phillips screws
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation .......................................................3
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness: 70-7304 • AX-HYKIA1-SWC
& AX-HYKIA-SPDIF (for amplied models)
Antenna Adapter: Not required
Steering wheel control interface: ASWC-1
A B C
Kia Optima 2011-2013
1.800.221.0932
|
MetraOnline.com
2
DASH DISASSEMBLY
1. Unsnap and remove trim from around
top center to passenger side dash.
(Figure A)
2. Unsnap panel from outside edge of
driver’s side dash. (Figure B)
3.
Remove (2) screws from knee panel
and pull top of panel back so it doesn’t
overlap the instrument cluster. (Figure C)
4. Remove (2) screws from the driver’s side
vent trim and remove. (Figure D)
(Figure B) (Figure F)
(Figure C) (Figure G)
(Figure D)
(Figure A)
(Figure H)(Figure E)
5. Remove (5) screws from instrument
cluster and remove. (Figure E)
6. Remove (4) screws from the climate
controls and remove. (Figure F)
7. Remove (6) screws securing the radio
trim panel and remove. (Figure G)
8. Remove (4) screws securing the factory
radio chassis and remove it. (Figure H)
Continue to Kit Preparation
REV. 5/15/2018 INST95-7345B 3
KIT PREPARATION KIT ASSEMBLY
(Figure A)
(Figure B)
(Figure C)
1. Remove (3) screws and remove the vent
from the factory radio panel. (Figure A)
2. Using the supplied #8 x 3/8” Phillips
screws, install the vent to the kits trim
panel. (Figure B)
Continue to Kit Assembly
(Figure A)
(Figure B)
1. Secure the
radio brackets
to the radio
using the screws supplied with the
radio. (Figure A)
2. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or Axxess. Test the radio for proper
operation.
3. Secure the radio assembly to the dash
using the factory screws. (Figure B)
4. Snap the
radio trim panel
over the radio
assembly, then reassemble the dash in
reverse order of disassembly. (Figure C)


Product specificaties

Merk: Metra
Categorie: Carkit
Model: 95-7345B

Heb je hulp nodig?

Als je hulp nodig hebt met Metra 95-7345B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Carkit Metra

Handleiding Carkit

Nieuwste handleidingen voor Carkit