Metra 95-6506B Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Metra 95-6506B (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
The World’s best kits.MetraOnline.com © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION REV.8/8/17 INST95-6506B
I N S TA L L A T I O N I N S T R U C T I O N S
95-6506B
KIT FEATURES
ISO DDIN radio provision
Painted matte black to match the factory appearance
KIT COMPONENTS
• A) Radio brackets
TOOLS REQUIRED
• Phillips screwdriver • Socket wrench
• Small flat blade screwdriver • Cutting tool
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation .......................................................3
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness: CHTO-02 amplified interface
• 70-6506 amplified bypass harness
Antenna Adapter: 40-CR10
A
Chrysler Pacifica 2004-2008
1.800.221.0932
|
MetraOnline.com
DASH DISASSEMBLY
2
1. Loosen (1) T-15 Torx screw from the front
side of the shift knob and pull up to
remove. (Figure A)
Note:
For models equipped without a
release lever on the shift knob, just turn
counter-clockwise to remove.
2. Unsnap the floor console trim around
the shifter. Unplug the harness to
console trim and remove the trim.
(Figure B)
3. Unsnap and remove the ignition
key trimring.
(Figure B)
P
R
N
D
AUTOSTICK
P
R
N
D
AUTOSTICK
(Figure A) (Figure C)
4. Unsnap and remove the dash trim
panels from each side of the radio/
climate controls. (Figure C)
5. Remove (4) Phillips screws to
remove the radio.
Continue to Kit Preparation
REV. 8/8/2017 INST95-6506B 3
KIT PREPARATION KIT ASSEMBLY
1. Cut and remove the sub-dash to allow
clearance for the aftermarket radio.
(Figure A)
Continue to Kit Assembly
ISO DDIN radio provision
1. Attach the
radio brackets
to the radio
using the screws supplied with the radio.
(Figure A)
2. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra.
Test the radio for proper operation.
3. Secure the completed assembly into the
dash using the factory screws.
4. Reassemble the dash in reverse order
of disassembly.
(Figure A) (Figure A)
Remove shaded area


Product specificaties

Merk: Metra
Categorie: Niet gecategoriseerd
Model: 95-6506B

Heb je hulp nodig?

Als je hulp nodig hebt met Metra 95-6506B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Metra

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd