Metra 70-8114 Handleiding

Bekijk gratis de handleiding van Metra 70-8114 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 37 mensen en kreeg gemiddeld 4.4 sterren uit 6 reviews. Heb je een vraag over Metra 70-8114 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Installation Instructions for 70-8114

© COPYRIGHT 2004-2014 METRA ELECTRONICS CORPORATION

1-800-221-0932 metraonline.com

REV. 10/13/2014

Installation Instructions for 70-8114

© COPYRIGHT 2004-2014 METRA ELECTRONICS CORPORATION

1-800-221-0932 metraonline.com

REV. 10/13/2014

70-8114

Toyota/Lexus/Scion ASWC-1 harness

LEXUS

ES-Series 2002-2006

GX-Series 2003-2009

RX-Series 2004-2009

SCION

iQ 2012-up

tC 2005-2013

xA 2004-2006

xB 2004-up

xD 2008-up

TOYOTA

4-Runner* 2012-2013

4-Runner 2003-2011

Avalon 2005-2012

Camry 2005-2011

Corolla* 2011-2013

Corolla 2009-2010

FJ Cruiser* 2013-up

FJ Cruiser 2007-2012

Highlander* 2013

Highlander 2004-2012

Matrix* 2013

Matrix 2009-2012

Prius 2004-2011

Rav-4 2005-2011

Sequoia* 2013-up

Sequoia 2003-2012

Sienna 2003-2014

Solara (Camry) 2004-2008

Tacoma* 2012

Tacoma 2005-2011

Tundra 2003-2013

Venza 2009-2012

APPLICATIONS

Connections to be made

When installing an aftermarket radio, the 70-8114 will allow the user to retain their factory

installed steering wheel controls without having to splice into the factory wiring (ASWC-1 required

and sold separately). In addition, we include RCA’s to allow the user to retain their factory installed

3.5mm AUX IN jack (aftermarket radio must have a audio AUX IN).

Continued on back

* These vehicles use either a 20-Pin or 28-pin connector for the steering wheel control

harness. If your vehicle uses a 28-pin connector, please use the AX-TOY28SWC instead.

Caution: Metra recommends disconnecting the negative battery terminal before beginning

any installation. All accessories, switches, and especially air bag indicator lights must be

plugged in before reconnecting the battery or cycling the ignition.

Note: Refer also to the instructions included with the aftermarket radio.

K PNOWLEDGE IS OWER

Enhance your installation and fabrication skills by

enrolling in the most cognized and spected rere

mobile electronics school in our industry.

Log onto www.installerinstitute.com or call

800-354-6782 for mo information and take steps re

toward a better tomorrow.

Metra recommends MECP

certified technicians

Installation:

1. Connect the wire to 12-volt accessory power.Red

2. Connect the wire to chassis ground (by itself).Black

3. Connect the 3.5mm jack to the steering wheel control input, in the aftermarket radio.

4. Connect the RCA jack to the left audio AUX IN of the aftermarket radio White

(if equipped).

5. Connect the RCA to the right audio AUX IN of the aftermarket radio (if equipped).Red

Note:

• Audiodevicesconnectedthroughthe3.5mmjackwillbecontrolledfromtheaudio 

device, not the aftermarket radio.

• PleaserefertotheASWC-1programminginstructionsforprogrammingoftheASWC-1.

Product specificaties