Metapace L-3 Handleiding

Metapace Labelprinter L-3

Lees hieronder de 📖 handleiding in het Nederlandse voor Metapace L-3 (38 pagina's) in de categorie Labelprinter. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/38

Thermal Printers

T-1

L-1

S-1 S-2

T-2

L-2

Label Printers

Bar Code Scanners

Important Safety Instructions

Ⴗ Only qualified and trained service technicians should attempt to repair the printer.

Ⴗ Do not place the printer on or near a heat source.

Ⴗ Be sure that the output of the power adapter is 24VDC and your power source

matches the rating listed on the power adapter. Be certain your power source is

grounded.

Ⴗ To avoid getting an electric shock, do not use a worn or damaged power cord. If

the power cord becomes damaged or frayed, replace it immediately.

Ⴗ Do not insert anything into the ventilation slots or openings on the printer.

Ⴗ The printer and power adapter should never be operated in a location where either

one can get wet. Personal injury may result.

Ⴗ The printhead becomes hot while printing. To protect from damaging the printhead

and risk of personal injury, avoid touching the printhead.

Ⴗ To get increased printhead longevity and higher quality printouts, always use

approved labels, tags and thermal transfer ribbons. Approved supplies can be

ordered from your dealer.

Ⴗ Static electricity that accumulates on the surface of the human body or other

surfaces can damage or destroy the printhead or electronic components in this

device. DO NOT touch the printhead or the electronic components with bare

hands.

Ⴗ Place the printer on a flat, firm, solid surface.

Possible Corrective Action

ႷNever operate in a high temperature environment.

ႷTurn off the power when not in use for extended periods.

ႷFollow all recommendations and setup instructions included in this manual.

Product specificaties

Merk:	Metapace
Categorie:	Labelprinter
Model:	L-3
Gewicht:	15000 g
Beeldscherm:	LCD
Intern geheugen:	8 MB
RS-232:	Ja
Soort voeding:	AC
Flash memory:	4 MB
Mediadikte:	0.06 - 0.305 mm
Maximum roll diameter:	203 mm
Bedrijfstemperatuur, bereik:	32 - 104 °F
Afmetingen (B x D x H):	286 x 448 x 280 mm
Printsnelheid (metrisch):	254 mm/sec
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 85 procent
Ondersteunde papierwijdte:	118 mm
Emulatie:	EPL, ZPL
USB 1.1 poort(en):	1