Metalux FM15WRCCR Handleiding

Bekijk gratis de handleiding van Metalux FM15WRCCR (4 pagina’s), behorend tot de categorie Verlichting. Deze gids werd als nuttig beoordeeld door 33 mensen en kreeg gemiddeld 4.9 sterren uit 9 reviews. Heb je een vraag over Metalux FM15WRCCR of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Instruction Manual/Directives/Instrucciones

Questions?/Questions/¿Preguntas? 1-800-334-6871 [email protected]

1

LED

PACKAGING CONTENTS/CONTENU DU PAQUET/CONTENIDO DEL PAQUETE

ITEMS REQUIRED

(Purchase separately)

• Phillips Head Screwdriver

WARNINGS AND CAUTIONS

Safety Information • Read carefully for your protection

• Turn off the power at fuse or circuit breaker box before installation and maintenance.

• Wear rubber-soled shoes and work on a sturdy ladder.

• NOTE: This fixture should be used on a 120-Volt fused circuit. (Check fixture labeling)

• Fixture must be installed according to National Electric Code and local building codes.

• Ground fixture to avoid potential electric shock.

• Handle metal parts carefully to prevent cuts.

• To avoid a hazard to children, account for all parts and destroy all packing materials.

• If you are unsure about wiring, consult a qualified electrician.

• If any part is missing or damaged, do not attempt to assemble, install or

operate the product.

• This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

WARNING: FCC Regulations state that any unauthorized changes or

modifications to this equipment not expressly approved by the manufacturer

could void the user’s authorization to operate this equipment.

SAVE THESE INSTRUCTIONS.

A.Round diuser

Diuseur acrylique

Difusor acrílico

B.Fixture housing

Boîtier du luminaire

Alojamiento del accesorio

ENGLISH

WIRING AND FIXTURE INSTALLATION

1.TURN POWER OFF AT MAIN FUSE/ BREAKER BOX. Carefully open carton, remove fixture

from carton.

2. Attach the mounting bracket to the JBOX by

inserting the short #8-32 x 9/16” screws into the

slots of the bracket and threading into JBOX.

3. Add the longer M4 x 23mm screws to the

mounting bracket in either the outer or inner thread

hole locations leaving about 1 in. of space between

the screw head and the mounting bracket.

4. Connect the fixture wires to the supply wires.

Black to black, white to white, and green to

bare / green ground wire.

5. Lift fixture pan up toward ceiling and carefully tuck

wires into outlet box. Align keyholes on fixture pan

with long screws, then twist fixture pan until the long

screws engage the narrow end of the keyholes.

Tighten long screws to secure pan.

6. Align the tabs on fixture pan with the channels on

diffuser, then insert diffuser into fixture pan. Carefully

twist the diffuser clockwise until secure.

7.To clean diffuser, use a mild detergent and water.

Wipe and allow to air dry.

8.Restore power to the electrical box. Turn the light

switch on to activate the fixture.

ENERGY STAR

®

2

3

F. Crossbar (Not to scale)

Barre transversale

(non à l’échelle)

Barra transversal (no a escala)

White Round LED Flushmount

Luminaire fluorescent DEL

rond encastré

Luminaria LED blanca, redonda

para montaje rasante

FM9WR30R

FM9WR40R

(9 inch/23 cm)

FM11WR30R

FM11WR40R

(11 inch/28 cm)

FM15WR30R

FM15WR40R

(15 inch/38 cm)

FM19WR30R

FM19WR40R

(19 inch/48 cm)

4

D. (2) Short Screw #8-32

(2) vis courtes #8-32

(2) tornillos cortos n.º 8-32

E. (2) Long Screw M4 x 23

(2) vis longues M4 x 23

(2) tornillos largos M4 x 23

C. (3) Wire connectors

(3) Serre-ls

(3) Conectores de cable

6

6

5

6

Product specificaties