Metabo WH18DEX Handleiding
Metabo
Boormachine
WH18DEX
Lees hieronder de 📖 handleiding in het Nederlandse voor Metabo WH18DEX (22 pagina's) in de categorie Boormachine. Deze handleiding was nuttig voor 58 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/22
TROUBLESHOOTING GUIDE ---------------------------------------------------------------------------------------------- 1
REPAIR GUIDE ----------------------------------------------------------------------------------------------------------------- 2
1. Precautions on disassembly and reassembly ------------------------------------------------------------- 2
• Disassembly ----------------------------------------------------------------------------------------------------- 2
• Reassembly ----------------------------------------------------------------------------------------------------- 6
• Type of silicone rubber --------------------------------------------------------------------------------------- 15
• Lubrication points and type of lubricant ------------------------------------------------------------------ 15
• Tightening torque ---------------------------------------------------------------------------------------------- 16
• Checking after reassembly ---------------------------------------------------------------------------------- 16
• No-load current value ---------------------------------------------------------------------------------------- 16
• Wiring diagram ------------------------------------------------------------------------------------------------- 17
2. Precautions on disassembly and reassembly of the charger ---------------------------------------- 17
CONTENTS Page
W
Overseas Sales Management Dept.
CONFIDENTIAL
Jul. 2022
PRODUCT NAME
18 V Cordless Impact Driver
Models WH 18DE, WH 18DEX
WH 18DEX: For the USA and Canada
WH 18DE: For other regions
WH 18DE
-1-
When troubleshooting, be sure to wipe off all dust, water, and other foreign matter from the internal parts,
and then dry the parts adequately before conducting the following investigation.
Trouble Cause Check method Corrective action
(1)
Motor does not
run.
• Switch connector
cable poorly inserted
• Check the insertion status of connector
cable. (See "1. Reassembly of the power
supply unit" on page 6.)
• Reinsert connector
cable.
• Rotor pinion ass'y
magnet poorly
adhered
• Check whether the rotor pinion ass'y
magnet is inserted to the same level as
the rotor core edge.
• Replace the rotor
pinion ass'y.
• DC-speed control
switch breakdown
• Check the board surface for any silicon
peelings, device damage, and drop dents.
• Check the metal terminals (pin) in the
switch connectors for corrosion.
• Replace the DC-speed
control switch.
• Wiring ass'y
breakdown
• Check the board surface for any urethane
peelings, device damage, and drop dents.
• Replace the wiring
ass'y.
(2)
Rotor does not
switch
direction.
• Switch connector
cable poorly inserted
• Check the insertion status of connector
cable. (See "1. Reassembly of the power
supply unit" on page 6.)
• Reinsert connector
cable.
• Faulty switch
connectors
• Check the conductor of the connector
cable for corrosion.
• Check the metal terminals (pin) in the
switch connectors for corrosion.
• Replace the DC-speed
control switch and the
wiring ass'y.
• Imperfect contact in
the switch
• If the connector cable of the wiring ass'y
and the switch connector are trouble-free
• Replace the DC-speed
control switch.
(3)
Rotating speed
does not rise
(rotating speed
cannot be
changed).
• Wiring ass'y
breakdown
• Check the board surface for any urethane
peelings, device damage, and drop dents.
• Replace the wiring
ass'y.
• Switch connector
cable poorly inserted
• Check the insertion status of connector
cable. (See "1. Reassembly of the power
supply unit" on page 6.)
• Reinsert connector
cable.
• Faulty switch
connectors
• Check the conductor of the connector
cable for corrosion.
• Check the metal terminals (pin) in the
switch connectors for corrosion.
• Replace the DC-speed
control switch and the
wiring ass'y.
• Imperfect contact in
the switch
• If the connector cable of the wiring ass'y
and the switch connector are trouble-free
• Replace the DC-speed
control switch.
(4)
LED light does
not go on.
• Wiring ass'y
breakdown
• Use a fully charged battery and operate
the light switch to check whether the LED
light goes on.
• Replace the wiring
ass’y.
TROUBLESHOOTING GUIDE
-2-
• Removal of the guide sleeve
WARNING: Always remove the battery from the main body before starting repair or maintenance
work. Because the tool is cordless, inadvertently activating the switch with the battery
left in the main body will start the motor rotating unexpectedly, and could cause serious
injury.
1. Precautions on disassembly and reassembly
[Bold] numbers in the description below correspond to the item numbers in the parts lists and exploded
assembly diagrams for the Models WH 18DE and WH 18DEX.
1. Removal of the guide sleeve
(1) Remove the Retaining Ring [1], Washer (D) [2], Guide Spring [3], and Guide Sleeve [4] in this order
with a small flat-blade screwdriver.
NOTE: Do not remove them too quickly. Be careful not to let the Retaining Ring [1] pop up, and
do not lose the two Steel Balls D3.5 [8] in the opening of the Anvil [9].
Disassembly
REPAIR GUIDE
[9]
Opening of the Retaining Ring [1]
[1]
Insert the edge of a small flat-blade screwdriver
under the end of the Retaining Ring [1].
Secure the body and align the opening of the
Retaining Ring [1] with the notch on the Anvil [9].
Slowly raise the Retaining
Ring [1] from the end to
remove it from the Anvil [9].
Hold Washer (D) [2] and Guide Spring [3] with
fingers to prevent them from popping up
together with the Retaining Ring [1].
Align.
[9]
[2]
[1]
[4]
[1]
[1]
[2]
[3]
[9]
[4]
Product specificaties
| Merk: | Metabo |
| Categorie: | Boormachine |
| Model: | WH18DEX |
Heb je hulp nodig?
Als je hulp nodig hebt met Metabo WH18DEX stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Boormachine Metabo
25 November 2023
25 November 2023
27 Augustus 2023
27 Augustus 2023
27 Augustus 2023
27 Augustus 2023
27 Augustus 2023
27 Augustus 2023
27 Augustus 2023
27 Augustus 2023
Handleiding Boormachine
- Boormachine Bosch
- Boormachine IKEA
- Boormachine Panasonic
- Boormachine AEG
- Boormachine DeWalt
- Boormachine Baier
- Boormachine Basetech
- Boormachine Batavia
- Boormachine Bavaria
- Boormachine Berner
- Boormachine Black Decker
- Boormachine Blucave
- Boormachine Bort
- Boormachine Bruder Mannesmann
- Boormachine Defort
- Boormachine Delta
- Boormachine Dremel
- Boormachine Duro
- Boormachine Ecomac
- Boormachine Economy
- Boormachine Einhell
- Boormachine Elu
- Boormachine Fe Powertools
- Boormachine Fein
- Boormachine Felisatti
- Boormachine Ferm
- Boormachine Ferrex
- Boormachine Festool
- Boormachine Flex
- Boormachine Gamma
- Boormachine Global
- Boormachine Gude
- Boormachine Hikoki
- Boormachine Hitachi
- Boormachine Holzmann
- Boormachine Huvema
- Boormachine Hyundai
- Boormachine Kawasaki
- Boormachine Kinzo
- Boormachine Kress
- Boormachine Laserliner
- Boormachine Lux Tools
- Boormachine Luxor
- Boormachine Maestro
- Boormachine Makita
- Boormachine Maktec
- Boormachine Max
- Boormachine Milwaukee
- Boormachine Parkside
- Boormachine Powerfix
- Boormachine Powerplus
- Boormachine Protool
- Boormachine Robust
- Boormachine Rupes
- Boormachine Ryobi
- Boormachine Scheppach
- Boormachine Silverline
- Boormachine Skil
- Boormachine Spit
- Boormachine Stanley
- Boormachine Stihl
- Boormachine Stomer
- Boormachine Tanaka
- Boormachine Texas
- Boormachine Toolcraft
- Boormachine Toolland
- Boormachine Topcraft
- Boormachine Trotec
- Boormachine Varo
- Boormachine Velleman
- Boormachine Vonroc
- Boormachine Westfalia
- Boormachine Workzone
- Boormachine Worx
- Boormachine Wurth
- Boormachine Zipper
- Boormachine Ozito
- Boormachine Black And Decker
- Boormachine Steren
- Boormachine Cocraft
- Boormachine Meec Tools
- Boormachine Genesis
- Boormachine Carat
- Boormachine Eibenstock
- Boormachine Hilti
- Boormachine Cotech
- Boormachine Power Craft
- Boormachine Tacklife
- Boormachine Truper
- Boormachine Fieldmann
- Boormachine Proxxon
- Boormachine Biltema
- Boormachine Malmbergs
- Boormachine Porter-Cable
- Boormachine Sun Joe
- Boormachine Dedra
- Boormachine Graphite
- Boormachine Narex
- Boormachine RIDGID
- Boormachine Tryton
- Boormachine Herkules
- Boormachine Sthor
- Boormachine Craftsman
- Boormachine Rikon
- Boormachine Verto
- Boormachine Alpha Tools
- Boormachine Hazet
- Boormachine G-Technology
- Boormachine Yato
- Boormachine Baumr-AG
- Boormachine Powerblade
- Boormachine Meister Craft
- Boormachine Wolfcraft
- Boormachine Kreg
- Boormachine Rok
- Boormachine RUKO
- Boormachine Einhell Bavaria
- Boormachine Ribimex
- Boormachine Ergotools Pattfield
- Boormachine MyTool
- Boormachine Rodcraft
- Boormachine Bavaria By Einhell
Nieuwste handleidingen voor Boormachine
16 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024