Metabo CC14SFS Handleiding
Metabo
Slijpmachine
CC14SFS
Bekijk gratis de handleiding van Metabo CC14SFS (52 pagina’s), behorend tot de categorie Slijpmachine. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.7 sterren uit 2 reviews. Heb je een vraag over Metabo CC14SFS of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/52
Model
Modèle
Modelo
CC 14SF (S)
Cut-Off Machine
Machine à tronçonner
Tronzadora
SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily injury!
This manual contains important information about product safety. Please read and
understand this manual BEFORE operating the power tool. Please keep this manual
available for other users and owners before they use the power tool. This manual should be
stored in safe place.
INSTRUCTIONS DE SECURITE ET MODE D’EMPLOI
AVERTISSEMENT
Une utilisation INCORRECTE OU DANGEREUSE de cet outil motorisé peut entraîner la
mort ou de sérieuses blessures corporelles!
Ce mode d’emploi contient d’importantes informations à propos de la sécurité de ce produit.
Prière de lire et de comprendre ce mode d’emploi AVANT d’utiliser l’outil motorisé. Garder ce
mode d’emploi à la disponibilité des autres utilisateurs et propriétaires avant qu’ils utilisent
l’outil motorisé. Ce mode d’emploi doit être conservé dans un endroit sûr.
INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES
ADVERTENCIA
¡La utilización INAPROPIADA O PELIGROSA de esta herramienta eléctrica puede resultar
en lesiones de gravedad o la muerte!
Este manual contiene información importante sobre la seguridad del producto. Lea y
comprenda este manual ANTES de utilizar la herramienta eléctrica. Guarde este manual
para que puedan leerlo otras personas antes de utilizar la herramienta eléctrica. Este
manual debe ser guardado en un lugar seguro.
DOUBLE INSULATION
DOUBLE ISOLATION
AISLAMIENTO DOBLE
000BookCC14SF(S)NAmetabo.indb1000BookCC14SF(S)NAmetabo.indb1 2020/04/0110:50:032020/04/0110:50:03
2
English
IMPORTANT SAFETY INFORMATION
Read and understand all of the safety precautions, warnings and operating instructions in the
Instruction Manual before operating or maintaining this power tool.
Most accidents that result from power tool operation and maintenance are caused by the failure
to observe basic safety rules or precautions. An accident can often be avoided by recognizing a
potentially hazardous situation before it occurs, and by observing appropriate safety procedures.
Basic safety precautions are outlined in the “SAFETY” section of this Instruction Manual and in
the sections which contain the operation and maintenance instructions.
Hazards that must be avoided to prevent bodily injury or machine damage are identifi ed by
WARNINGS on the power tool and in this Instruction Manual.
NEVER use this power tool in a manner that has not been specifi cally recommended by
metabo HPT.
MEANINGS OF SIGNAL WORDS
WARNING indicates a potentially hazardous situations which, if ignored, could result in death
or serious injury.
CAUTION indicates a potentially hazardous situations which, if not avoided, may result in minor
or moderate injury, or may cause machine damage.
NOTE emphasizes essential information.
000BookCC14SF(S)NAmetabo.indb2000BookCC14SF(S)NAmetabo.indb2 2020/04/0110:50:042020/04/0110:50:04
Product specificaties
| Merk: | Metabo |
| Categorie: | Slijpmachine |
| Model: | CC14SFS |
Heb je hulp nodig?
Als je hulp nodig hebt met Metabo CC14SFS stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Slijpmachine Metabo
15 Juni 2025
15 Juni 2025
23 Mei 2025
21 Mei 2025
14 December 2024
9 December 2024
3 September 2024
25 November 2023
23 November 2023
13 November 2023
Handleiding Slijpmachine
- Gude
- Draper
- Dolmar(Makita)
- Mirka
- Ergofix
- Cotech
- Chicago Pneumatic
- Batavia
- Kraftronic
- Black Decker
- Adler
- Milwaukee
- Proviel
- Tryton
- Meister Craft
Nieuwste handleidingen voor Slijpmachine
15 Juni 2025
15 Juni 2025
14 Juni 2025
10 Juni 2025
10 Juni 2025
7 Juni 2025
3 Juni 2025
3 Juni 2025
3 Juni 2025
3 Juni 2025