Meru AP1014i Handleiding

Meru Access point AP1014i

Lees hieronder de 📖 handleiding in het Nederlandse voor Meru AP1014i (2 pagina's) in de categorie Access point. Deze handleiding was nuttig voor 50 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
AP1014i
Single-radio, Dual-stream 2.4 GHz 802.11b/g/n Access Point
Entry-level Enterprise Wired and Wireless Connectivity
For more information about the AP1014i, visit www.merunetworks.com
The AP1014i is an 802.11b/g/n wireless access point
with a 2x2:2 MIMO design. Its single radio operates
over the 2.4 GHz band to support data, voice, and
video applications for in-room wireless access in
hospitality settings and in small branch oces.
The AP1014i provides a data rate of up to 300 Mbps
and features five 10/100BASE-T Fast Ethernet
ports. Four of the ports deliver connectivity for
wired devices such as IP set-top boxes and IP
phones, with an additional port for network uplink.
Built-in TLS-VPN tunneling provides secure
IP connectivity for remote oce applications,
eliminating the need for separate VPN devices.
The AP1014i supports multiple high-bandwidth
applications simultaneously, increasing productivity
for end users. Plug-and-play deployment makes
it easy to expand capacity, reducing IT workload.
The access point supports multiple operating
modes. Centralized mode simplifies deployment
in large campuses. VPN tunnel mode coupled
with distributed mode allows selected trac to be
bridged locally and is ideal for remote branch oces.
Mesh mode allows coverage to be cost-eectively
extended to hard-to-wire places.
As with other Meru access points, the AP1014i
integrates seamlessly with the System Director
wireless operating system and Meru management
tools to bring intelligent management and resilient
wireless services to your network.
Features Benefits
• Entry-level 802.11b/g/n WLAN access point
• Five 10/100BASE-T Fast Ethernet ports four for
end-user devices and one for network uplink
• Integrated TLS-VPN capability
• Single-channel, Virtual Cell technology
• Integration with Meru System Director
operating system
• Supports legacy Wi-Fi clients as well as 802.11n
• Delivers connectivity for wired devices such as IP
set-top boxes and IP phones
• Eliminates the need for separate VPN infrastructure
• Simplifies deployment and delivers seamless mobility
• Supports resource-intensive applications with
superior reliability and predictability
The AP1014i includes four Ethernet
ports for end-user devices, with an
additional port for network uplink.
QoS
WMM support
Dynamic WMM rate adaptation
Configurable QoS rules per user and application
OPERATING MODES
Centralized mode
Distributed mode
Remote VPN tunnel mode
Mesh mode
SECURITY
Access Control
WEP, WPA-PSK, WPA-TKIP, WPA2-AES, 802.11i, 802.1X (EAP-TLS,
EAP-TTLS, PEAP, LEAP, EAP-FAST, EAP-SIM, EAP-AKA, and EAP-MD5)
802.1X and captive portal authentication against local database on the
controller, RADIUS, and Active Directory
RADIUS-assisted per-user and per-ESSID access control via MAC filtering
Rogue Detection and Suppression
Capable of scanning 802.11n and 802.11b/g for rogue devices
MANAGEMENT
Centrally managed by any Meru controller running System Director 5.3
and above
Automatically discovers controllers and downloads configuration settings
for plug-and-play deployment
Upgrades and management using System Director/E(z)RF
Network Manager
Support for SNMP
WIRELESS SPECIFICATIONS
Radio Technologies
Single-radio, single-band 802.11n, indoor access point; 2x2 MIMO with
two spatial streams; support for both 20 MHz and 40 MHz
Supported radio technologies:
802.11b: Direct-sequence spread-spectrum (DSSS)
802.11g/n: Orthogonal frequency division multiplexing (OFDM)
802.11n: 2x2 MIMO with two spatial streams
Modulation
Supported modulation types
802.11b: BPSK, QPSK, CCK
802.11g/n: BPSK, QPSK, 16-QAM, 64-QAM
Frequency Band
Supported frequency bands:
2.400–2.485 GHz
(country-specific restrictions apply, adjusted by controller upon approval)
Operating Channels
2.4 GHz channel: 1 to 11 for U.S. & Canada, 1 to 13 for Europe, 1 to 14 for Japan
Channels configurable upon regulatory approval
Data Rate
Data rates supported (Mbps):
802.11g: 6, 9, 12, 18, 24, 36, 48, 54
802.11b: 1, 2, 5.5, 11
802.11n: 6.5 - 300 (MCS0 to MCS15)
Transmit Power and Receive Sensitivity
Maximum Transmit
Power (EIRP)
Receive Sensitivity at
Highest Data Rate
IEEE 802.11b 21 dBm -88 dBm
EEE 802.11g 17 dBm -72 dBm
IEEE 802.11n (HT20) 20 dBm -70 dBm
IEEE 802.11n (HT40) 20 dBm -70 dBm
Configurable Transmission Power
Transmission power configurable in 1.0 dBm increments
PHYSICAL SPECIFICATIONS
Antenna
Two integrated 2.4 GHz PIFA antennas with antenna gain (typical) of
3.5 and 2.6 dBi
Power
802.3af PoE only
Interfaces
One 10/100BASE-T Ethernet (RJ45), auto-sensing link speed and MDI/
MDX, with 802.3af PoE
Four 10/100BASE-T Ethernet (RJ45), auto-sensing link speed and MDI/MDX
One USB 2.0 port (Type-A connector) – not used
Indicators
Two LEDs over facade for AP status, additional LEDs for Ethernet activity
Mounting
Wall or ceiling mount
Access point includes:
Mount over 15/16” T-bar (no tools required)
Lock key
Other mounting kits sold separately:
MNT-SCRMKIT-03, 5-pc mounting adapter for standard dropped ceiling
MNT-SCRMKIT-04, 5-pc mounting adapter for Interlude/Silhouette ceilings
MNT-WMKIT-01, wall-mount kit
Dimensions
6.78” x 6.78” x 1.91”(17.20 cm x 17.20 cm x 4.80 cm)
Weight
0.76 lb (0.35 kg)
Environmental
Operating temperature: 32˚ F to 12F (0˚ C to 50˚ C)
Operating humidity: 5–95% (non-condensing)
Storage temperature: -40˚ F to 185˚ F (-40˚ C to 70˚ C) ambient
Storage humidity: 5–95% (non-condensing)
Regulatory Approval
FCC
EU R&TTE Directive 1995/5/EC
RS-210
ICES-003
VCCI
ARIB-STD33 & STD66
For more country-specific regulatory
approval, please contact your Meru
representative.
Certifications
EU RoHS Compliant
China RoHS Compliant
WEEE & REACH Compliant
Wi-Fi certified 802.11b/g/n
Warranty
Limited lifetime warranty
Part Numbers
AP1014i Single-band, single-radio IEEE
802.11b/g/n, 2x2:2 MIMO access point
(includes integrated 2.4 GHz antennas)
Meru delivers an all-wireless network that
fully supports the enterprise, delivering a
consistent, interactive experience for all
users. No matter what applications they
are running. No matter how many other
users are on the network.
Corporate Headquarters
894 Ross Drive, Sunnyvale, CA 94089
T +1.408.215.5300
F +1.408.215.5301
E info@merunetworks.com
For more information about the Meru AP1014i, visit or email your questions to: info@merunetworks.com.www.merunetworks.com
Meru Networks | Copyright © 2012 Meru Networks, Inc. All rights reserved worldwide. Meru Networks is a registered trademark of Meru Networks,
Inc. All other trademarks, trade names, or service marks mentioned in this document are the property of their respective owners. 8.12 DS1058.US
AP1014i
TECHNICAL SPECIFICATIONS
X
90deg 270deg
180deg
0deg
90deg 270deg
180deg
0deg
X-Z PanelX-Y Panel
X
Y Z


Product specificaties

Merk: Meru
Categorie: Access point
Model: AP1014i

Heb je hulp nodig?

Als je hulp nodig hebt met Meru AP1014i stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Access point Meru

Meru

Meru AP1014i Handleiding

16 Augustus 2023

Handleiding Access point

Nieuwste handleidingen voor Access point