Mercury CMTS01 Handleiding
Mercury
Niet gecategoriseerd
CMTS01
Bekijk gratis de handleiding van Mercury CMTS01 (10 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 157 mensen en kreeg gemiddeld 4.5 sterren uit 79 reviews. Heb je een vraag over Mercury CMTS01 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/10
Item ref: 600.113 UK
CMTS01
Smart Digital Multimeter
User Manual
www.avsl.com 600.113 UK
Please read this manual thoroughly and
ensure all contents are fully understood
before using the apparatus.
Warning
To avoid possible electric shock or personal injury, and to avoid possible
damage to the tester or to the equipment under test, adhere to the se
following rules:
• Before using the tester inspect the case. Do not use the tester if it is
damaged or the case (or part of the case) is removed. Look for cracks
or missing plastic. Pay attention to the insulation around the
connectors.
• Inspect the test leads for damaged insulation or exposed metal.
Check the test leads for continuity.
• Do not apply more than the rated voltage, as marked on the tester,
between the terminals or between any terminal and grounding.
• When the tester is working at an effective voltage over 60V in DC or
30Vrms in AC, special care should be taken for there is danger of
electric shock.
• Always use the proper terminals and function for your measurements.
• Do not use or store the tester in an environment of high temperature,
humidity, explosive, flammable damp or of a rong magnetic field. , st
The performance of the tester may deteriorate after being exposed to
any of these elements.
• When using the test leads, keep your fingers behind the finger guards.
• Disconnect circuit power and discharge all high-voltage capacitors
before testing resistance, continuity, diodes.
• Replace the battery as soon as the low battery indicator appears.
With a low battery, the meter may produce false readings that can lead
to electric shock and personal injury.
• Remove the connection between the testing leads and the circuit being
tested and turn the meter power off before opening the meter case.
www.avsl.com 600.113 UK
• The internal circuit of the meter shall not be altered at will to avoid
damage of the meter and any accident.
• A soft cloth and mild detergent should be used to clean the surface of
the tester on a regular basis. No abrasive and solvent should be used
to prevent the surface of the tester from corrosion or damage.
• The tester is suitable for indoor use only.
• Turn the tester power off when it is not in use and take out the battery
when not using for a long time. Check the battery regularly; replace the
battery immediately if any signs of leaking appear. Battery acid will
damage the tester.
Electrical & LCD Symbols
Product specificaties
| Merk: | Mercury |
| Categorie: | Niet gecategoriseerd |
| Model: | CMTS01 |
Heb je hulp nodig?
Als je hulp nodig hebt met Mercury CMTS01 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Mercury
18 Augustus 2024
18 Augustus 2024
18 Augustus 2024
18 Maart 2024
18 Maart 2024
4 Januari 2024
6 December 2023
4 September 2023
25 Juni 2023
22 Juni 2023
Handleiding Niet gecategoriseerd
- EtherWAN
- Be Cool
- Beem
- Catalyst
- Olympia
- Dash
- Perma
- Oreck
- Graco
- Silver Cross
- SafeMi
- D'Addario
- Dubatti
- Valeton
- Pyramid
Nieuwste handleidingen voor Niet gecategoriseerd
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025