Mellerware Ice Master ICM001 Handleiding

Bekijk gratis de handleiding van Mellerware Ice Master ICM001 (2 pagina’s), behorend tot de categorie Ijsmachine. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.7 sterren uit 7 reviews. Heb je een vraag over Mellerware Ice Master ICM001 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

REGISTER YOUR MELLERWARE WARRANTY

Thank you for purchasing a Mellerware product. Mellerware guarantees

that your product has been thoroughly inspected and tested before being

dispatched and is free from mechanical or electrical defects and complies

with the applicable safety standards. With every Mellerware product

purchased you will receive up to a 3 year warranty as detailed in the terms

and conditions below.

FIRST YEAR – 1 YEAR RETAIL WARRANTY

Should defects due to faulty parts or workmanship develop, under normal

domestic use, within 12 months from the original date of purchase please

return the product to the store from where it was purchased for a refund

or replacement at the discretion of the brand. Mellerware appliances are

intended for domestic use only and not for industrial or professional use.

The Warranty, if the product is used outside of domestic use or used in a

commercial environment, is reduced to 3 months with no extended war-

ranty available, all other terms and conditions applicable.

SECOND YEAR – OPTIONAL 1 YEAR ADDITIONAL EXTENDED

ONLINE WARRANTY REGISTRATION

Mellerware takes pride in its product quality and therefore offer an

extended 12 month warranty over and above the 1 Year Retail Warranty.

Should defects due to faulty material or workmanship develop, under normal

domestic use, after the initial 12 month period and within 24 months from

the original date of purchase, please return the product to Mellerware for

repair. Mellerware will assess and repair the product free of charge should

it be found to be a valid warranty claim and will return it to you directly.

Mellerware will replace a product with a similar product in the same or

better condition, if the repair cannot be conducted for whatever reason.

Should the product fall outside of the warranty, Mellerware will produce a

repair and delivery quotation for your approval.

NB: Registration should be completed at www.creativehousewares.co.za.

Should you experience any technical difculties you are welcome to

contact our customer service line on 086 111 5006 and one of our

consultants will gladly assist with the online warranty registration. Should

you not register the product within the 12 months of purchase, you will

automatically forfeit this extended warranty.

THIRD YEAR – OPTIONAL 1 YEAR ADDITIONAL EXTENDED

COMMUNICATION OPT IN WARRANTY

Mellerware takes pride in its product quality and therefore offer an addi-

tional 12 month warranty over and above the 1 Year Retail and 1 year

online registration warranty. Should defects due to faulty material or

workmanship develop, under normal domestic use, after the initial 12 month

period, the extended online registration 12 month period and within 36

months from the original date of purchase, please return the product to

Mellerware for repair. Mellerware will assess and repair the product free of

charge should it be found to be a valid warranty claim and will return it to

you directly. Mellerware will replace a product with a similar product in the

same or better condition, if the repair cannot be conducted for whatever

reason. Should the product fall outside of the warranty, Mellerware will

produce a repair and delivery quotation for your approval.

NB: Registration should be completed at www.creativehousewares.

co.za. Should you experience any technical difculties you are welcome

to contact our customer service line on 086 111 5006 and one of our

consultants will gladly assist with the online warranty registration and

opt-in email communication. Should you wish to qualify for the additional

third year extended warranty, you would need to have registered your

warranty within the rst 12 months from date of purchase and subscribed

to receive brand communication. The extended warranty is conditional

upon these requirements. Please note that you are however free to opt

out at any stage in accordance with the POPI act, this will however result

in you forfeiting this additional extended “communication opt in” warranty

from the recorded opt-out date.

Before returning your product, check the following:

•Your household mains supply socket is in good condition, working and

switched on.

• The mains supply circuit is not overloaded (white trip switch on your

DB board is off).

•You have read the trouble shooting guide in your Instructions for Use.

•All accessories and parts are present.

The following conditions apply:

1. Please ensure you retain your original receipt as this must be

presented when making a claim under the terms of the warranty.

It is impossible to determine the warranty period without proof of

purchase, so please keep this in a safe place. (NB. Your original receipt

can be scanned onto the Mellerware website [www.mellerware.co.za]

or Creative Housewares (Pty) Ltd [www.creativehousewares.co.za]

for safe storage.)

2. If a refund or exchange is required the product must be complete

with all accessories, parts and packaging. Missing parts will render the

warranty void. Any refund or exchange remains at the brands discre-

tion beyond the implied warranty granted by the CPA.

3. Upon receipt of your appliance, check it for any transport damage to

ensure it is safe for use. Return it to the store as soon as possible for

exchange if damaged. The warranty is void if products are damaged

after use, so please do not use a damaged product.

4. Any alteration made to the appliance purchased will void the warranty.

5. Your product is designed for normal domestic household use. Failure

to read and comply with the instructions for use, cleaning and

maintenance will render your warranty void, so please read these

instructions carefully to ensure your safety, and to get the most effec-

tive use from the product (e.g. not removing limescale; water deposits;

insect infestation, and/or burnt products).

6. Any abuse, negligent, improper or accidental use or care will render

the warranty void and Creative Housewares (Pty) Ltd will not be

liable for any loss or damage.

7. Any attempted repair, or replacement of unauthorised parts will ren-

der the warranty void, so please contact an authorised service centre

or service agent for any service or repair requirements.

8. NB: The warranty on replaced products will be from the original date

of purchase and not from when the date replacement was made.

9. All repairs carry a 3 month warranty even if this falls outside of the

warranty period.

10. Mellerware will attempt to conduct repairs within reasonable time,

this in line with industry standards but cannot be held responsible or

liable for any circumstances not under the brand’s control.

11. This warranty does not apply to glass components, lters, consum-

ables, and other parts subject to fair wear and tear.

Repairs out of the warranty period:

If service or repair becomes necessary outside the warranty period, this

service is still available however all transport/postage, spares and labour

costs will be for the customers’ account. All chargeable repairs will require

the customers’ written acceptance of the quote. Once the go-ahead has

been received Mellerware will undertake to conduct the repair within a

reasonable time and maintain the condition of the product as received. All

repairs carry a warranty of 3 months from the date of the repair.

For any service, enquiries and complaints, please contact our Customer

Care on 086 111 5006, e-mail [email protected] or WhatsApp on

+27 79 890 6867 from 08h00 to 15h00 Monday to Friday excluding

public holidays.

Please also note that the company is normally closed for 2 weeks around

Christmas and New Year.

Please send all products to one of the listed service centres.

ONLINE WARRANTY REGISTRATION

WHY REGISTER YOUR WARRANTY?

Mellerware pride ourselves on bringing premium quality appliances to market, and as a commitment to this level of quality we offer up to a

3 year warranty (1 Year Retail + 1 Year Extended Online warranty registration + 1 Year Extended opt-in communication warranty) on all of

our products. To take advantage of the Free Extended Warranty options you will need to register your warranty online within the rst year

of purchase in order to make a valid claim. Now you can register your product, upload your warranty online and never have to worry about

losing your receipt again. Enjoy the benet of up to 3 year’s warranty.

ADDED BENEFITS

In addition to providing you with an online prole of your registered products we will also provide a host of value added benets:

•Discount voucher on product warranty registration

•Incentives and Competitions for registered users

•New recipes or ideas for your products

•New product developments - be the rst to get the latest appliances

•Special offers on promotional items

•Open your internet browser and visit

www.mellerware.co.za

•Click on the “Register” link and create your username and

password. Or if you have done this already login with your

username and password.

•Click on “Register your Warranty” and follow the easy

instructions.

•Scan and upload your receipt.

DESKTOP/

LAPTOP

•Open your internet browser and visit

www.creativehousewares.co.za

•Click on the “Register” link and and create your username and

password. Or if you have done this already login with your

username and password.

•Click on “Register your Warranty” and follow the easy instructions.

•Scan and upload your receipt.

SMART PHONE/

TABLET

National Service Centre: 086 111 5006

e-mail: help@chwsa.co.za

www.creativehousewares.co.za

Notes:

1. The online warranty system is a safe storage facility for your receipt.

2. You will be required to register on the Mellerware or Creative Housewares website. You will receive a username and password once

registered. This will give you access to your prole.

3. From your prole you will be able to load products that you have purchased. In order to successfully register your warranty you will

need to scan and upload your receipt to us.

4. All instructions on how to load your products are available inside your prole.

5. Please note that you must check that your receipt has been uploaded correctly. Creative Housewares cannot be held responsible for

faxes or les not received.

6. For assistance with registration please email: help@chwsa.co.za

How to Register your Online Warranty?

1

Y

E

A

R

O

N

L

I

N

E

R

E

G

I

S

T

R

A

T

I

O

N

1

Y

E

A

R

R

E

T

A

I

L

W

A

R

R

A

N

T

Y

1

Y

E

A

R

C

O

M

M

U

N

I

C

A

T

I

O

N

O

P

T

-

I

N

terms & conditions applyterms & conditions apply

Ice is full,

but the indi-

cator light is

not on.

The machine is in a

location with strong

light, which affects the

infrared sensor.

Move the machine to a

darker location.

Ice scoop

panel is

stuck.

There is too much ice

in the bucket.

Remove some ice from

the bucket.

The machine

is not

working.

The ice full sensor is

broken.

Stop using the machine

and contact your sup-

plier for repair.

6. Anomalies and repair:

6.1. Take the appliance to an authorised support centre if

product is damaged or other problems arise.

6.2. If the connection to the mains has been damaged, it

must be replaced and you should proceed as you would in

the case of damage.

7. Recycling:

7.1. These electrical products, cables, batteries, packaging,

and the manual, should not be mixed with general household

waste. For proper recycling, please take these products to

your nearest Creative Housewares office where they will be

accepted for recycling free of charge.

7.2. Alternatively, please contact your local authority or

household waste disposal service for further details of your

nearest designated collection point. Correct product disposal

saves resources and prevents negative effects on human

health and the environment.

______________________________________________

Afrikaans

Geagte kliënt,

Dankie vir u keuse om ’n Mellerware handelsmerk produk

te koop. Danksy die tegnologie, ontwerp en werking en die

feit dat dit voldoen aan die strengste gehalte standaarde,

is U verseker van ’n volle bevredigende gebruik en lang

produklewe.

1. Parte beskrywing:

A. Deursigtige Venster

B. Voordeksel

C. Hoofliggaam

D. Beheerpaneel

E. Boonste paneel

F. Luginlaat

G. Ysvolsensor

H. Ysskeppaneel

I. Ysemmer

J. Silikoonprop

K. Ysskep

L. Waaiermotor

1.2. Paneel beskwrywing:

A. Ysvol-aanwyser

B. Krag-aanwyser

C. Watertekort-aanwyser

D. Aan/Af-knoppie

2. Belangrike veiligheids voorsorg:

Voor die toestel vir die eerste keer gebruik word maak alle

parte skoon soos voorgeskryf in skoonmaak artikel. Lees

die instruksies deeglik en bewaar

2.1. Gebruik en werksomgewing:

2.1.1 Hou die werk oppervlak skoon en helder verlig.

Ongelukke gebeur in donker areas

2.1.2. Gebruik die produk in n goed geventileerde area.

2.1.3. Moenie die toestel naby `n warm gas of elektriese

brander of qn warm oond plaas nie.

2.1.4. Streng toesig is nodig as die toestel naby of deur

kinders gebruik word

2.1.5. Plaas toestel op stabiele area en weg van water

2.1.6. `n Brand mag onstaan as die toestel bedek word.

2.1.7. Moenie vlambare material naby toestel plaas nie.

2.1.8. Die toestel is nie geskik om aan `n tydsbeheer toestel

te Koppel nie.

2.1.9. Moenie die toestel gebruik as die koord of prop

beskadig is.

2.1.10. Maak seker die spanning soos aangedui op die

Belangrike nota:

• Moenie water of ander vloeistowwe wat onsuiwer-

hede of vaste deeltjies bevat, gebruik nie.

• Moenie chemikalieë soos alkohol, staalwol of harde

borsels gebruik om die oppervlak van die produk

skoon te maak nie.

• Moenie die kragkabel of verpakkingsbykomstighede

aan direkte sonlig blootstel nie.

• Moenie die masjien kantel nie, aangesien dit die

verkoelingstelsel kan laat wanfunksioneer.

3.3. Selfreinigende modus:

3.3.1. Om die selfreinigende modus te begin, druk en

hou die aan/uit-knoppie vir 3 sekondes terwyl die masjien

normaalweg werk. Die pomp sal begin werk en water vir

ongeveer 10 minute van die tenk na die yskas sirkuleer

voordat dit outomaties in bystandmodus gaan.

3.3.2. U kan die selfreinigende modus te eniger tyd verlaat

deur die aan/uit-knoppie te druk.

4. Skoonmaak:

4.1.1. Verwyder die ysemmer van die masjien.

4.1.2. Vind die silikoonprop aan die onderkant van die mas-

jien, maak dit oop en dreineer al die water uit die tenk.

4.1.3. Gebruik ‘n sagte lap verdun met ‘n neutrale skoon-

maakmiddel of louwarm water om die watertenk en die

buitekant van die masjien skoon te maak.

4.1.4. Spoel die binnekant met skoon water af.

4.1.5. Plaas die silikoonprop weer aan die onderkant van die

masjien terug en maak seker dat dit stewig vas is.

4.1.6. Daaglikse onderhoud is noodsaaklik om die ysmas-

jien skoon en higiënies te hou. Met verloop van tyd kan

veranderinge in temperatuur, watergehalte en produkver-

oudering lei tot skaal, muf en roes in die ys. Gee noukeurig

aandag aan die daaglikse onderhoud van die watertenk om

dit skoon te hou.

4.1.7. ‘n Reuk in die ys kan te wyte wees aan watergehalte.

Dit is nie ‘n fout nie en sal tipies na die eerste paar gebruike

verdwyn. As die reuk voortduur, word dit aanbeveel om ‘n

ysmasjienreiniger of sitroensuur te gebruik om die masjien

skoon te maak. Moenie ys met ‘n reuk inneem om ongemak

of siekte te voorkom nie.

4.1.8. Om ysgehalte te verseker, vervang die water gereeld.

4.1.9. As die ysmasjien nie vir ‘n lang tyd gebruik gaan word

nie, skakel die krag af, ontkoppel die masjien en dreineer

enige oorblywende water uit die dreineringsuitlaat. Bêre die

masjien in ‘n droë omgewing.

5. Foutenanalise en -hantering:

Mislukking:Oorsaak:Oplossing:

Die masjien

werk, maar

maak nie

ys nie.

Die kompressor is in

aanskakelbeskerming,

of daar is ‘n koelmid-

dellek.

Wag 30 minute

totdat die masjien

normaalweg werk.

Indien dit steeds nie

begin nie, kontak ‘n

diensverskaffer.

Die ysmaak-

siklus is te

lank.

1. Die ysemmer bevat

te veel onderdele. 2.

Die watertemperatuur

is te laag.

1. Verstel die

verdamper. 2. Vervang

die water in die tenk

met water tussen 5°C

en 32°C.

Die ys is vol,

maar die

aanwyserlig-

gie brand

nie.

Die masjien is in ‘n

plek met sterk lig, wat

die infrarooi sensor

beïnvloed.

Skuif die masjien na ‘n

donkerder plek.

Ysskep-

paneel sit

vas.

Daar is te veel ys in

die emmer.

Verwyder ‘n bietjie ys

uit die emmer.

Die masjien

werk nie.

Die ysvolsensor is

stukkend.

Hou op om die

masjien te gebruik en

kontak u verskaffer vir

herstelwerk.

6. Anomalieë en herstel:

6.1. Neem die toestel na `n gemagtigde tegniese diens

sentrum as die toestel beskadig is of probleme onstaan

6.2. As konneksie na die muurprop beskadig is, moet die

toestel vervang of herstel word volgens waarborg.

7. Herwinning:

7.1. Hierdie elektriese produkte, kabels, batterye, verpakking

en die handleiding moet nie met algemene huishoudelike

afval gemeng word nie. Vir behoorlike herwinning, neem hi-

erdie produkte na u naaste kantoor vir Creative Housewares,

waar dit gratis aanvaar word vir herwinning.

7.2. Kontak u plaaslike owerheid of huishoudelike vulis-

diens vir nadere besonderhede oor u naaste aangewese

versamelingspunt. Korrekte produkverwydering bespaar

hulpbronne en voorkom negatiewe gevolge vir menslike

gesondheid en die omgewing.

_____________________________________________

English

Dear Customer

Thank you for choosing to purchase a Mellerware brand

product. Thanks to its technology, design and operation and

the fact that it exceeds the strictest quality standards, a fully

satisfactory use and long product life can be assured.

1.1. Parts description:

A. Transparent Window

B. Front Lid

C. Main Body

D. Control Panel

E. Top Panel

F. Air Inlet

G. Ice Full Sensor

H. Ice Scoop Panel

I. Ice Bucket

J. Silicone Plug

K. Ice Scoop

L. Fan Motor

1.2. Panel Display:

A. Ice Full Indicator

B. Power Indicator

C. Lack of Water Indication

D. On/Off Button

2. Safety advice and warnings!

Read these instructions carefully before switching on the

appliance and keep them for future reference. Failure to follow

and observe these instructions could lead to an accident.

Clean all the parts of the product, as indicated in the cleaning

section, before use.

2.1. Use or working environment:

2.1.1. Keep the working area clean and well lit. Cluttered and

dark areas invite accidents.

2.1.2. Use the appliance in a well-ventilated area.

2.1.3. Do not place the appliance on hot surfaces, such as

cooking plates, gas burners, ovens or similar items.

2.1.4. Keep children and bystanders away when using this

appliance.

2.1.5. Place the appliance on a horizontal, flat, stable surface

and away from other heat sources and contact with water.

2.1.6. Keep the appliance away from flammable material

such as textiles, curtains, cardboard or paper, etc.

2.1.7. Do not place flammable material near the appliance.

2.1.8. Do not use the appliance in association with a pro-

grammer, timer or other device that automatically switches

it on.

2.1.9. Do not use the appliance if the cable or plug is

damaged.

2.1.10. Ensure that the voltage indicated on the rating label

matches the mains power supply voltage before plugging in

the appliance.

2.1.11. Connect the appliance to the mains power supply

with an earth socket withstanding a minimum of 10 amperes.

2.1.12. The appliance’s plug must fit into the mains power

supply socket properly. Do not alter the plug.

2.1.13. If using a multi plug check ratings carefully as the

current used by several appliances could easily exceed the

rating of the multi plug.

2.1.14. Only use the appliance with the specific

temperature control unit provided.

2.1.15. If any of the appliance casings breaks, immediately

disconnect the appliance from the mains power supply to

prevent the possibility of an electric shock.

2.1.16. Do not use the appliance if it has fallen on the floor or

if there are visible signs of damage.

2.1.17. Do not force the power cord. Never use the power

cord to lift up, carry or unplug the appliance.

2.1.18. Do not wrap the power cord around the appliance.

2.1.19. Do not clip or crease the power cord.

2.1.20. Do not allow the power cord to hang or to come into

contact with the hot surfaces of the appliance.

2.1.21. Check the state of the power cord. Damaged or

tangled cables increase the risk of electric shock.

2.1.22. The appliance is not suitable for outdoor use.

2.1.23. Power cord should be regularly examined for signs

of damage, and if the cord is damaged, the appliance must

not be used.

2.1.24. Do not touch the plug with wet hands.

2.2. Personal safety:

2.2.1. : Do not leave the appliance unattended CAUTION

during use as there is a risk of an accident.

2.2.2. Do not touch the rotating parts of the appliance, as it

may cause serious injury.

2.2.3. This appliance is only for domestic use, not for

industrial or professional use. It is not intended to be used by

guests in hospitality environments such as bed and breakfast,

hotels, motels, and other types of residential environments,

even in farm houses, areas of the kitchen staff in shops,

offices and other work environments.

2.2.4. This appliance is not intended for use by persons

(including children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless they

have been given supervision or instruction concerning use of

the appliance by a person responsible for their safety.

2.2.5. This appliance is not a toy. Children should be super-

vised to ensure that they do not play with the appliance.

2.3. Use and care:

2.3.1. Fully unroll the appliance’s power cable before each

use.

2.3.2. Do not use the appliance if the parts or accessories

are not properly fitted.

2.3.3. Do not turn the appliance over while it is in use or

connected to the mains power supply.

2.3.4. Use the appliance handle/s, to carry it or

move it.(if aplicable).

2.3.5. Do not turn the appliance over while it is in

use or connected to the mains.

2.3.6. This appliance should be stored out of reach of

children.

2.3.7. Do not store the appliance if it is still hot.

2.3.8. Never leave the appliance unattended when

in use and keep out of the reach of children, as

this is an electrical appliance that reaches high

temperatures and may cause serious burns. (if applicable).

2.3.9. If for some reason, the appliance were to catch fire,

disconnect the appliance from the mains power supply and

DO NOT USE WATER TO PUT THE FIRE OUT.

2.4. Service:

2.4.1. Make sure that the appliance is serviced only by suit-

ably qualified technician, and that only original spare parts or

accessories are used to replace existing parts/accessories.

2.4.2. If the power cord is damaged, the manufacturer or its

service agent or a similarly qualified person must replace it in

order to avoid a hazard.

2.4.3. Any misuse or failure to follow the instructions for

use renders the guarantee and the manufacturer’s liability

null and void.

2.5. Opening the package:

2.5.1.Remove all the external and internal packages and

check if all parts are inside.

2.5.2. Take out the ice storage bucket and wash it in clean

water. Use clean water to wash the water tank.

2.5.3. Wash the evaporator columns with clean water or

alcohol.

2.5.4. Please keep the ice maker away from direct sunlight,

heat or radiation. Place the ice maker horizontally and make

sure there is at 15cm gap between the sides and rear.

3. Operation:

3.1. Before first use:

3.1.1. Before using the ice maker for the first time, it is highly

recommended to clean the entire machine thoroughly, as

outlined in the “Cleaning” section.

3.1.2. If the machine is new or has not been used for a

long time, flush the water tank and drain the water from the

drainage outlet. This helps to remove any residual odour or

dust particles.

3.1.3. Discard the ice from the first two cycles of ice

production.

3.1.4. When you first connect the machine to the power

supply, the initial ice cubes produced may be smaller. This is

not a malfunction.

3.2. Use:

3.2.1. Open the front cover, remove the ice bucket, and add

water to the water tank. The water level should not exceed the

maximum fill line.

3.2.2. Place the ice bucket back into the machine, ensuring

it is properly seated. If it is not in place, press gently on the

bottom of the bucket until it is securely installed.

3.2.3. Press the “ON/OFF” button on the control panel to start

the machine. The power indicator light will turn on, and the

machine will begin making ice.

3.2.4. The first ice-making cycle takes approximately 9

minutes. The size of the ice cubes depends on the water and

ambient temperatures.

3.2.5. Regularly check the water level in the tank. If the water

level is too low, the pump will not be able to function, and the

ice maker will stop automatically. The low water indicator will

light up, and the buzzer will beep. To resume operation, fill the

water tank to below the maximum level and press the “ON/

OFF” button again.

3.2.6. When the ice bucket is full, the machine will

automatically stop making ice. The “full” indicator light will

turn on, and the buzzer will beep. Ice production will resume

automatically once the ice level drops below the infrared

detection position.

3.2.7. To stop or cancel the ice-making process, press the

“ON/OFF” button. This will place the machine in standby

mode.

3.2.8. It is recommended to change the water every 24 hours

to maintain cleanliness. If the machine will not be used for a

long time, unplug it and drain all the water from the tank, then

wipe the tank dry.

Important note:

• Do not use water or other liquids containing impuri-

ties or solid particles.

• Do not use chemicals such as alcohol, steel wool, or

hard brushes to clean the surface of the product.

• Do not expose the power cord or packaging acces-

sories to direct sunlight.

• Do not tilt the machine, as this may cause the cooling

system to malfunction.

3.3. Self- Cleaning:

3.3.1. To start the self-cleaning mode, press and hold the

power button for 3 seconds while the machine is operating

normally. The pump will begin working, circulating water from

the tank to the ice box for approximately 10 minutes before

automatically entering standby mode.

3.3.2. You can exit the self-cleaning mode at any time by

pressing the power button.

4. Cleaning:

4.1.1. Remove the ice bucket from the machine.

4.1.2. Locate the silicone plug at the bottom of the machine,

open it, and drain all the water from the tank.

4.1.3. Using a soft cloth diluted with a neutral cleaner or

lukewarm water, clean the water tank and the exterior of the

machine.

4.1.4. Rinse the interior with clean water.

4.1.5. Reinstall the silicone plug at the bottom of the

machine, ensuring it is secure.

4.1.6. Daily maintenance is crucial for keeping the ice maker

clean and hygienic. Over time, changes in temperature, water

quality, and product aging can lead to scale, mold, and rust

in the ice. Pay close attention to the daily maintenance of the

water tank to keep it clean.

4.1.7. An odour in the ice may be due to water quality. It is

not a fault and will typically disappear after the first few uses.

If the smell persists, it is suggested to use an ice maker

cleaner or citric acid to clean the machine. Do not consume

ice with an odour to avoid discomfort or illness.

4.1.8. To ensure ice quality, replace the water frequently.

4.1.9. If the ice maker will not be used for a long time, turn

off the power, unplug the machine, and drain any remaining

water from the drainage outlet. Store the machine in a dry

environment.

5. Failure analysis and handling:

Failure:Cause:Solution:

The machine

is operating

but not mak-

ing ice.

The compressor is

in start protection, or

there is a refrigerant

leak.

Wait 30 minutes for

the machine to operate

normally. If it still

doesn’t start, contact a

service provider.

Ice making

cycle is too

long.

1. The ice bucket

contains too many

parts.

2. The water tempera-

ture is too low.

1. Adjust the

evaporator.

2. Replace the water

in the tank with water

between 5°C and 32°C.

gradering etiket kom ooreen met die hoofspanning

2.1.11. Heg die toestel aan op die stroomtoevoer met ‘n

oortekking wat ten minste 10 ampère behels.

2.1.12. Die toestel prop moet in die hoof prop pas en moenie

die prop verander

2.1.13. As ‘n multi prop gebruik word, moet die graderings

noukeurig nagegaan word, aangesien die stroom wat deur

verskeie toestelle gebruik word maklik die aanslag van die

multiplug kan oorskry

2.1.14. Gebruik die toestel slegs met die spesifieke temper-

atuurbeheereenheid wat voorsien word.

2.1.15. Indien enige van die toestel se omhulsels breek,

ontkoppel die toestel onmiddellik van die hoofkragtoevoer om

die moontlikheid van ‘n elektriese skok te voorkom.

2.1.16. Moenie die toestel gebruik as dit op die vloer geval

het of as daar sigbare tekens van skade is nie.

2.1.17. Moenie die kragkoord forseer nie. Moet nooit die

kragkoord gebruik om die toestel op te lig, te dra of uit te

trek nie.

2.1.18. Moenie die kragkoord om die toestel draai nie.

2.1.19. Moenie die kragkoord knip of kreukel nie.

2.1.20. Moenie toelaat dat die kragkoord hang of in aanraking

kom met die warm oppervlaktes van die toestel nie.

2.1.21. Kontroleer die toestand van die kragkoord.

Beskadigde of verstrengelde kabels verhoog die risiko van

elektriese skok.

2.1.22. Die toestel is nie geskik vir buiteluggebruik nie.

2.1.23. Die kragkabel moet gereeld ondersoek word vir

tekens van skade, en indien die kabel beskadig is, moet die

toestel nie gebruik word nie.

2.1.24. Moenie die prop met nat hande aanraak nie.

2.2. Persoonlike veiligheid:

2.2.1. Moenie die toestel sonder toesig laat nieLET WEL:

2.2.2. Moenie warm oppervlaktes aanraak nie gebruik hand-

vatsels of knoppe want dit kan lei tot ernstige brandwonde

2.2.3. Die toestel is nie geskik vir industriele gebruik soos

kantore,hotelle motelle en gastehuise

2.2.4. Die toestel is nie geskik vir gebruik deur vermindered

fisiese verstandelike vermoens of gebrek aan ervaring of

kennis tensy hulle opleiding gehad het

2.2.5. Die toestel is nie `n speelding and kinders moet altyd

toesig p1-he om te verhoed dat hulle met die toestel speel

2.3. Gebruik en sorg:

2.3.1. Rol die toestel se kragkabel volledig af voor elke

gebruik.

2.3.2. Moenie die toestel gebruik as die onderdele of bykom-

stighede nie behoorlik gemonteer is nie.

2.3.3. Moenie die toestel omdraai terwyl dit gebruik word of

aan die hoofkragtoevoer gekoppel is nie.

2.3.4. Gebruik die toestel se handvatsel(s) om dit te dra of

te skuif.

2.3.5. Moenie die toestel omdraai terwyl dit gebruik word of

aan die hoofkrag gekoppel is nie.

2.3.6. Hierdie toestel moet buite bereik van kinders gebêre

word.

2.3.7. Moenie die toestel bêre as dit nog warm is nie.

2.3.8. Moet nooit die toestel sonder toesig los wanneer

dit gebruik word nie en hou dit buite bereik van kinders,

aangesien dit ‘n elektriese toestel is wat hoë temperature

bereik en ernstige brandwonde kan veroorsaak (indien van

toepassing).

2.3.9. Indien die toestel om een of ander rede aan die brand

slaan, ontkoppel die toestel van die hoofkragtoevoer en

MOENIE WATER GEBRUIK OM DIE VUUR TE BLUS NIE.

2.4. Diens:

2.4.1. Die toestel moet deur ‘n gekwalifiseerde tegnikus

gediens word.

2.4.2 As die koord beskadig word moet dit deur die

diessagent of ‘n gekwalifiseerde person vervang word om

brandgevaar te verhoed.

2.4.3.Enige misbruik en mislukking om instruksies te volg

lewer die waarborg nul en van gener waarde.

2.5. Die verpakking oopmaak:

2.5.1. Verwyder al die eksterne en interne verpakkings en

kontroleer of alle dele binne is.

2.5.2. Haal die ysbergingsemmer uit en was dit in skoon

water. Gebruik skoon water om die watertenk te was.

2.5.3. Was die verdamperkolomme met skoon water of

alkohol.

2.5.4. Hou die ysmasjien weg van direkte sonlig, hitte of

bestraling. Plaas die ysmasjien horisontaal en maak seker dat

daar ‘n gaping van 15 cm tussen die kante en agterkant is.

3. Werking:

3.1. Voor eerste gebruik:

3.1.1. Voordat u die ysmasjien vir die eerste keer gebruik,

word dit sterk aanbeveel om die hele masjien deeglik skoon

te maak, soos uiteengesit in die afdeling “Skoonmaak”.

3.1.2. Indien die masjien nuut is of lank nie gebruik is nie,

spoel die watertenk en dreineer die water uit die dreinering-

suitlaat. Dit help om enige oorblywende reuk of stofdeeltjies

te verwyder.

3.1.3. Gooi die ys van die eerste twee siklusse van

ysproduksie weg.

3.1.4. Wanneer u die masjien vir die eerste keer aan die

kragtoevoer koppel, kan die aanvanklike ysblokkies wat

geproduseer word, kleiner wees. Dit is nie ‘n wanfunksie nie.

3.2. Gebruik:

3.2.1. Maak die voorste deksel oop, verwyder die ysemmer

en voeg water by die watertenk. Die watervlak moet nie die

maksimum vullyn oorskry nie.

3.2.2. Plaas die ysemmer terug in die masjien en maak

seker dat dit behoorlik vas is. Indien dit nie in plek is nie,

druk liggies op die onderkant van die emmer totdat dit stewig

geïnstalleer is.

3.2.3. Druk die “AAN/AF”-knoppie op die beheerpaneel om

die masjien te begin. Die krag-aanwyserliggie sal aanskakel

en die masjien sal ys begin maak.

3.2.4. Die eerste ysmaaksiklus duur ongeveer 9 minute.

Die grootte van die ysblokkies hang af van die water- en

omgewingstemperature.

3.2.5. Kontroleer die watervlak in die tenk gereeld. As die

watervlak te laag is, sal die pomp nie kan funksioneer nie en

die ysmaker sal outomaties stop. Die lae water-aanwyser sal

aanskakel en die zoemer sal piep. Om die werking te hervat,

vul die watertenk tot onder die maksimum vlak en druk weer

die “AAN/AF”-knoppie.

3.2.6. Wanneer die ysemmer vol is, sal die masjien outoma-

ties ophou om ys te maak. Die “vol”-aanwyserliggie sal

aanskakel en die zoemer sal piep. Ysproduksie sal outomaties

hervat sodra die ysvlak onder die infrarooi-deteksieposisie

daal.

3.2.7. Om die ysmaakproses te stop of te kanselleer, druk

die “AAN/AF”-knoppie. Dit sal die masjien in bystandmodus

plaas.

3.2.8. Dit word aanbeveel om die water elke 24 uur te

vervang om skoonheid te handhaaf. Indien die masjien vir ‘n

lang tyd nie gebruik gaan word nie, ontkoppel die stekker en

dreineer al die water uit die tenk, en vee dan die tenk droog.

ICE MASTER

ICE MAKER

1

Y

E

A

R

O

N

L

I

N

E

R

E

G

I

S

T

R

A

T

I

O

N

1

Y

E

A

R

R

E

T

A

I

L

W

A

R

R

A

N

T

Y

1

Y

E

A

R

C

O

M

M

U

N

I

C

A

T

I

O

N

O

P

T

-

I

N

terms & conditions applyterms & conditions apply

Model:

ICM001D

100W

complies with

INTERNATIONAL

IEC60335

SAFETY SPECIFICATIONS

Product specificaties