MB Quart QSE-216 Handleiding

MB Quart Speaker QSE-216

Lees hieronder de 📖 handleiding in het Nederlandse voor MB Quart QSE-216 (11 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/11
QSE-216
6.5 INCH 2-WAY
COMPONENT
SPEAKERS
Speaker dimensions
Specications
CAUTION
Always consider consulting a professional audio installer before installing
new speakers. Many car manufacturers locate speakers behind interior
panels that require special tools to remove those panels to access the
speakers. Some panels will be screwed in, some will use plastic fasteners,
many will have both. Be careful and take your time.
If you are using the speaker wire supplied with your new speakers make sure
that you run the speaker wires through the factory boot. Do not let speaker
wire make contact with metal edges of doors or other access holes.
CONGRATULATIONS
By purchasing the QSE-216 2-Way Component System you have chosen
an excellent MB Quart product.
Q is the perfect example of the technical achievements that can be made in
the area of in-car loudspeakers by means of intensive research. Q is more than
a philosophy, since Q enables perfect sound reproduction in conjunction with
conveniently compact dimensions. Q can be installed quickly and easily, since
every detail of the system has been designed with functionality in mind.
Model
Power Handling RMS
Power Handling Peak
Impedance
Sensitivity (1 Watt / 1 Meter)
Frequency Response +/- 10dB
Crossover Slope
Cut-Out
Chassis Depth from Flange
QSE-216
170 Watts
360 Watts
4 Ohms
8.5 dB
35Hz - 32Khz
12dB/Octave
5.68”
2.5”
Most modern vehicles have speakers that are mounted directly to the
structure of the door. Access is achieved by the removal of the door
panel. Some vehicles may only require the removal of a small panel
around the speaker itself.
Once the factory speakers are
removed, check the t and
determine if there is enough
depth clearance for the new
speaker. A good way to do this is
to roll the window down and back
up while holding the speaker in
place. If you decide to run wires,
make sure to use factory harness
boots and grommets where ever
possible.
Access and
remove factory
door speakers
Fit and Wiring
Factory speaker removal
A
B
It’s a good idea to conrm that you have purchased the correct size
speakers to t your vehicle. If you have any reservations about being
able to complete the installation yourself, we recommend contacting a
professional. The removal of interior panels can be tricky and may require
special tools. Disconnect the negative terminal of the vehicle battery
during the installation, in order to avoid possible short-circuits.
Be careful as you go.
General


Product specificaties

Merk: MB Quart
Categorie: Speaker
Model: QSE-216

Heb je hulp nodig?

Als je hulp nodig hebt met MB Quart QSE-216 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker MB Quart

Handleiding Speaker

Nieuwste handleidingen voor Speaker