MB Quart NHT1-120BPR Handleiding

Bekijk gratis de handleiding van MB Quart NHT1-120BPR (2 pagina’s), behorend tot de categorie Speaker. Deze gids werd als nuttig beoordeeld door 16 mensen en kreeg gemiddeld 4.1 sterren uit 9 reviews. Heb je een vraag over MB Quart NHT1-120BPR of wil je andere gebruikers van dit product iets vragen? Stel een vraag

The NHT1 clamping system is designed for

towers and support structures that utilize ROUND

tubing. Oval tubing and at structures will not

work with this clamp. The NHT1 clamp can be

used with tube diameters from 1.5” up to 2.75”.

Included are separate bushing sets for all tube

sizes at 1/8” increments. Refer to the table below

to determine your conguration.

Choose a suitable

mounting location

Mounting Location

Dimensions

CAUTION

Always consider consulting a professional audio installer

before installing new speakers. Many manufacturers locate

speakers behind interior panels that require special tools to

remove. Be careful and take your time.

If you are using the speaker wire supplied with your new

speakers make sure that you run the speaker wires only

through safe areas. Do not let speaker wire make contact with

metal edges or hot engine components.

Congratulations on your choice of a MBQuart speaker.

This “Quick Start” Installation guide is meant to help

you complete a basic installation. For more detailed

information on system setting, speaker and subwoofer

conguration, and full specications by model, visit our

website at mbquart.com

It’s a good idea to conrm that you have purchased the

correct size speakers to t your application. If you have any

reservations about being able to complete the installation

yourself, we recommend contacting a professional.

Before you start

Carefully select a route for the audio signal

wires. If using existing speaker wires, conrm

that the wire is in good shape and not

shorted. In the case of an illuminated model,

route a positive and negative wire from a

switched +12V source. Avoid routing wires

through dangerous areas.

Route signal and

illumination wires

Wiring

230mm

9.04”

104mm

4.08”

44mm

1.73”

274mm

10.78”

215mm

8.47”

Tube

Diameter

Tube

Circumference

ClampTop

Bushing

Bottom

Bushing

1.54.71A1.501.50

1.6255.10A1.631.63

1.755.50A1.751.75

1.8755.89Anone1.88

26.28B2.002.00

2.1256.68B2.132.13

2.257.07B2.252.25

2.3757.46B2.382.38

2.57.85B2.502.50

2.6258.25B2.682.68

2.758.64Bnonenone

Black ...................................... Audio signal negative

Black w/white stripe ................ Audio signal positive

Black ....................................... Illumination negative

Red ......................................... Illumination positive

Product specificaties