MB Quart MBQX-SUB-2 Handleiding

MB Quart Speaker MBQX-SUB-2

Lees hieronder de 📖 handleiding in het Nederlandse voor MB Quart MBQX-SUB-2 (18 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/18
CAN-AM MAVERICK X3
ADD-ON 10” SUBWOOFER / 400 WATT
UTV-TUNED AUDIO PACKAGE
Installation Manual
MBQX-SUB-2
2
Thanks for choosing MB QUART! The UTV-Tuned Add-On 10” Subwoofer with 400 Watt Amplier for
applicable Can-Am Maverick X3 vehicles (2017 and up) is engineered for your vehicle. Installation following
these instructions can be completed in about 2 hours when you have a Stage 2, 3 or 5 MB Quart system for
Can-Am X3 already installed.
INSTALLATION OVERVIEW VIDEO
Many of our vehicle-specic products feature
a “how to” install video with additional details
on making your installation successful.
Where available, locate your specic video
on the website. Type your model number
(MBQX-SUB-2) into the search box, then click
on the INSTALL & SUPPORT tab.
WHAT’S INCLUDED
As you unpackage the MBQX-STG3-1 system, account for all components before attempting installation.
Please note Stage 3 and 5 MB Quart Can-Am UTV-tuned systems will require an accessory amplier plate.
What’s In The Box?
● Compact Mono, Class D 400 Watt Subwoofer Amplier
● One Under-Seat Vehicle-Specic 10” Subwoofer with Mounting Brackets and Aluminum Spacers
NOTE FOR STAGE 3 and 5 SYSTEMS An optional second subwoofer amplier
mounting plate (MBQX-SUB-ACC-1) for Stage 3 or 5 Systems already containing one
subwoofer and 400 watt amplier is available at MBQuart.com. This accessory item is
required for the amplier in this kit because the dual amplier mounting plate installed
in Stage 3 and 5 systems is already populated with two ampliers and contains one
subwoofer. Instructions on this accessory mounting plate and how to install this kit as a
“SUB 2” add-on are included in this manual.
NOTE FOR HARDWARE - Hardware for mounting components to enclosures and other installation-related
items you will need are contained within the packaging for each piece. Do not dispose of any packaging until
you have completely installed your system and are certain you have accounted for every piece. If you feel
something is missing, please contact Maxxsonics directly via email – support@maxxsonics.com.
WARRANTY
Your audio system is covered by a 1 year warranty from the date of invoice. It is important to retain your
sales receipt. Furthermore, it is crucial that you record and store a record of the serial numbers for each of
the components that are included in your system. In the rare instance that a warranty claim is needed both
proof of purchase and serial numbers are required. Additional information on the back page.
TECHNICAL SUPPORT
For additional technical information, go to the “SUPPORT” tab at MBQUART.com. There you will nd helpful,
FAQ, TEQ Tips and you can contact Technical Support via email.
INTRODUCTION
MBQX-SUB-
ACC-1
3
PRE-INSTALLATION
INSTALLATION TIME
About 2 hours are required to complete this installation if you’ve already got a Stage 2, 3 or 5 MB Quart
Can-Am UTV-tuned sytem installed.
TOOLS AND SUPPLIES NEEDED
● Wire Strippers and Crimpers ● Phillips Screwdriver
● Flush Cut Wire Cutters (for trimming zip ties) ● Small, Straight (Jeweler’s) Screwdriver
● High-Quality Electrical Tape ● Heat Gun or Lighter
● Hand-Held Battery-Powered Drill w/ Screw Tip ● Bojo Tools (Non-Marring Pry Tools)
● Ratchet, 8mm Socket ● 10mm Socket (Gauge Cluster/Battery)
● 13mm Socket and 13mm Box Wrench (Seat Removal) ● 18mm Socket (Seat Removal)
● 1/2” Socket (Subwoofer Enclosure Front Brackets) ● 7/16” Socket (Optional 3rd Amp Plate)
● T-25 and T-27 Torx Drivers (Dash & Housing Hardware) ● T-30 Torx Driver (Dash/Console)
You may or may not need all of the tools listed above depending on the degree of disassembly required for
your own existing system conguration.
In addition to the tools listed, have music ready for INITIAL TESTING and FINE TUNING steps.
● USB thumb drive with music pre-loaded
● Bluetooth device such as a smartphone with music or a music app
SAFETY PRECAUTIONS
Safely prepare your vehicle for the installation before proceeding.
● Turn the ignition off and remove the key
● Use a packing blanket other soft material to protect your machine
● Safety Glasses - always wear eye protection
● Once all of the seats are removed, disconnect the negative battery cable before proceeding
PREPARATION FOR INSTALLATION & DISASSEMBLY
Before fully dismantling your vehicle, we suggest you prepare all your components, enclosures and wiring
harnesses. It increases efciency to have everything ready when each component is installed. Please note
some models with seat belts will require seat belt attachment point removal to remove the whole seat.
REMOVE SEATS - DISCONNECT BATTERY
123
Slide driver’s seat forward
and remove two 18mm bolts
securing the rear of the seat
frame. If the vehicle has
factory-installed seats, you
can also access these bolts by
ipping up the seat cushion (a
socket extension is required).
Slide driver’s seat back to
access front 13mm through-
bolts and nuts. Using a socket
and box wrench, remove inner
and outer front seat hardware.
Unplug seat belt sensor.
Remove front driver’s seat and
set aside with all hardware.
Repeat seat removal on
front passenger’s side. Once
passenger seat near battery is
removed, disconnect (black)
negative battery cable by
removing a 10mm bolt and set
the negative cable aside.


Product specificaties

Merk: MB Quart
Categorie: Speaker
Model: MBQX-SUB-2

Heb je hulp nodig?

Als je hulp nodig hebt met MB Quart MBQX-SUB-2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker MB Quart

Handleiding Speaker

Nieuwste handleidingen voor Speaker